光电仪器结构设计中的经济性研究

针对光电仪器行业对降低光电仪器成本日趋渐高的呼声,提出了运用价值工程理论对光电仪器结构设计中的经济性进行研究的思路。从产品结构设计成本、材料成本、产品制造成本、生产周期这四个方面对光电仪器结构设计中的经济性进行了分析研究。研究结果表明,光电仪器结构设计经济性分析有助降低光电仪器产品的生产成本、缩短生产周期、提升产品价值,从而获得较好的社会效益和经济效益。     

原始数据中束流相关本底的分离

束流相关本底处理的不确定性是在BES/BEPC上进行R值测量的主要误差来源之一,提出从原始数据中分离出束流相关样本的新方法, 并把此样本用于调节强子产生器LUARLW的参数,以减小强子探测效率的系统误差, 提高R值的测量精度.     

晶界内耗的研究

晶界内耗是中国科学家葛庭燧开创的一个研究领域．以往晶界内耗的研究主要是用多晶试样进行的．最近作者用不同取向差的双晶试样研究了单个晶界的内耗，取得了一些新的结果．文章综述了研究晶界内耗的意义以及新近的进展．     

周期性边界条件下多孔介质方腔内自然对流换热数值研究

对充满多孔介质的倾斜方腔,在其上下壁面绝热、右侧壁面维持恒温To及左侧壁面温度基于To随时间按正弦规律变化的情况下,采用Brinkman扩展达西模型和SIMPLER算法对方腔内的自然对流与换热进行了非稳态数值模拟,方腔倾角α的范围为0°～90°,Pr数为1,Ra数为106.计算研究不同的振荡频率和方腔倾角对方腔内对流换热的影响.数值模拟结果表明:振荡频率f为60π,方腔倾角为43°时,方腔内的换热最强.     

Analytical solution to a mode of mixed elastohydrodynamic lubrication with mixed contact regimes: Part I. Without consideration of contact adhering layer in the inlet zone

In 2005, Zhang presented a Grubin-like inlet zone analysis to the isothermal line contact elastohydrodynamic lubrication under relatively heavy loads when the hydrodynamic film thickness in the Hertzian zone approaches zero and the EHL fluid is Newtonian [Zhang, Y.B. A justification of the load-carrying capacity of elastohydrodynamic lubrication film based on the Newtonian fluid model. Industrial Lubrication and Tribology, 2005, Vol. 57, pp. 224–232]. His results showed that in this EHL, when the rolling speed is lower than the characteristic rolling speed (U_ch =) 0.0372W^1.50/G, the Hertzian zone is in physical adsorbed layer boundary lubrication while the inlet zone is in conventional hydrodynamic lubrication. This mode of EHL represents a mode of mixed EHL with mixed contact regimes, where hydrodynamic films with different rheological behaviors occur in different areas of the contact. The present paper presents an analysis to this mode of mixed EHL by using the Grubin type method when the contact adhering layer in the inlet zone is neglected. Pressures, film thicknesses and load partition in the contact are obtained from this analysis. It is also found that the formula for the characteristic rolling speed U_ch = 0.0372W^1.50/G obtained by Zhang [Zhang, Y.B. A justification of the load-carrying capacity of elastohydrodynamic lubrication film based on the Newtonian fluid model. Industrial Lubrication and Tribology, 2005, Vol. 57, pp. 224–232] may be valid for the dimensionless load W > 1.0E−7, while it may be invalid for the dimensionless load W < 1.0E−8. In part II [Zhang, Y.B. Analytical solution to a mode of mixed elastohydrodynamic lubrication with mixed contact regimes: Part II. Considering the contact adhering layer effect in the inlet zone. Journal of Molecular Liquids, 2006, Vol. 117. (doi:10.1016/j.molliq.2006.04.007)] will be presented an analysis to other two modes of mixed EHL with mixed contact regimes for relatively heavy loads, low rolling speeds and Newtonian fluids, where the conventional hydrodynamic lubrication, physical adsorbed layer boundary lubrication and oxidized chemical layer boundary lubrication can simultaneously occur in the inlet zone while the oxidized chemical layer boundary lubrication or the fresh metal-oxidized chemical boundary layer dry contact occur in the Hertzian zone, considering the contact adhering layer effect in the inlet zone.     

Closed form solution to a second order boundary value problem and its application in fluid mechanics

The Adomian decomposition method is used by many researchers to investigate several scientific models. In this Letter, the modified Adomian decomposition method is applied to construct a closed form solution for a second order boundary value problem with singularity.     

开边界条件下一类新Hubbard模型的精确解

用坐标Bethe ansatz方法详细研究了开边界条件下一类新Hubbard模型的可积性问题. 得到了系统的能谱、可积边界条件和Bethe ansatz方程.     

R值测量中强子事例选择的改进

强子事例的选择和强子探测效率是在BEPC/BES上进行R值测量的两项主要误差来源. 过去实验只选取等于或者大于2叉的强子事例, 因而0叉和1叉事例的丢失将导致强子事例数和强子探测效率的较大误差. 试图提出在R值测量中选取包含1叉强子事例在内的样本, 这将有助于更合理地调节强子事例产生器LUARLW的参数, 减小强子探测效率和R值测量的系统误差.     

Efficient inverse radiation analysis in a cylindrical geometry using a combined method of hybrid genetic algorithm and finite-difference Newton method

An inverse radiation problem was considered to estimate boundary conditions such as temperature distribution and emissivity in axisymmetric absorbing, emitting, and scattering medium, given the measured incident radiative heat fluxes. The finite-volume method was employed to solve a direct radiative transfer equation for a two-dimensional axisymmetric geometry. Various parameter estimators, such as conjugate-gradient method, hybrid genetic algorithm, and finite-difference Newton method, were employed to solve the inverse problems, while discussing their performances in terms of estimation accuracy and computational efficiency. Based on this, we proposed, as a best inverse analysis tool, a new combined method that adopted the hybrid genetic algorithm as an initial value selector and used the finite-difference Newton method as a parameter estimator.     

Transparent boundary conditions for the Helmholtz equation in some ramified domains with a fractal boundary

The paper addresses a class of boundary value problems in some self-similar ramified domains, with the Laplace or Helmholtz equations. Much stress is placed on transparent boundary conditions which allow the solutions to be computed in subdomains. A self similar finite element method is proposed and tested. It can be used for numerically computing the spectrum of the Laplace operator with Neumann boundary conditions, as well as the eigenmodes. The eigenmodes are normalized by means of a perturbation method and the spectral decomposition of a compactly supported function is carried out. Finally, a numerical method for the wave equation is addressed.