Copper-catalyzed asymmetric conjugate addition of trialkylaluminium reagents to trisubstituted enones: construction of chiral quaternary centers

Me3Al, Et3Al, and vinylalane species undergo enantioselective conjugate addition to a wide range of 2- or 3-substituted enones (cyclopent-2-enones, cyclohex-2-enones, 3-methyl cyclohept-2-enone) in the presence of catalytic amount of copper salt (copper thiophene carboxylate, [Cu(CH3CN)4]BF4 or [CuOTf]2C6H6) and tropos-phosphoramidite-based ligand. Thus, chiral quaternary centers can be built, with up to 98% ee after rigorous optimization of experimental conditions. It was shown that the main important parameter was the order of the introduction of the reagents. Then, the generated enantioenriched aluminium enolates and the chiral conjugate adducts were functionalized and used for subsequent reactions.     

Indium-mediated reduction of β-aminovinyl chloro-difluoromethylated ketones in the presence of heteroaryl aldehydes: A mild entry to novel difluoromethylene enaminone derivatives

The synthesis of new β-aminovinyl chloro-difluoromethylated ketones 1 and 2 is presented. In some of them the activation of the C-Cl bond was achieved, under mild conditions, using indium powder. The corresponding difluoro-enolates were trapped with a series of aromatic and heterocyclic aldehydes, to furnish the corresponding difluoromethylene aldol products 3 and 4, in moderate to good yields. The present synthetic methodology provides a convenient approach for the preparation of novel difluoromethylene functionalized enaminone derivatives.     

Nucleophilic (phenylsulfinyl)difluoromethylation of carbonyl compounds with difluoromethyl phenyl sulfoxide

We have successfully achieved nucleophilic (phenylsulfinyl)difluoromethylation of both enolizable and non-enolizable aldehydes and ketones by using difluoromethyl phenyl sulfone (1) as the fluoroalkylating agent. Although the chemical yields of the reactions are good to excellent, the observed diastereoselectivity is poor (dr = 1:1.04-2.03). The present synthetic methodology provides a convenient alternative for the preparation of α-(phenylsulfinyl)difluoromethylated carbinols that were previously synthesized via a two-step procedure.     

Sodium dithionite initiated addition of CF2Br2 to β-pinene and reactions of the adduct: Synthesis and the reactivity of new 1,1-difluorodienes

Sodium dithionite effectively promotes the addition of dibromodifluoromethane to the exocyclic double bond of β-pinene. The reaction proceeded in a MeCN/H₂O system to give almost quantitatively an adduct, 1-(2-bromo-2,2-difluoroethyl)-4-(2-bromoisopropyl)-cyclohexene, as the sole product. On treatment of the adduct with 2,2,6,6-tetramethylpiperidine elimination of HBr only from the (CH₃)₂CHBr group occurred to give a mixture of regioisomeric dienes, while treatment with 50% KOH under phase transfer catalysis conditions or with K₂CO₃ in DMF resulted in total dehydrobromination to give trienes possessing an exocyclic CHCF₂ group. Surprisingly, the main course of the reactions of the adduct with DBU (1,8-diazabicyclo[5.4.0]undece-7-ene) and also with t-BuOK in THF was elimination of HBr only from the CH₂CF₂Br group to afford 1-(2,2-difluorovinyl)-4-(2-bromoisopropyl)cyclohexene as the main product. Catalytic hydrogenation of the adduct followed by treatment with DBU afforded a conjugated diene, 1-(2,2-difluorovinyl)-4-isopropylcyclohexene. Compounds bearing the CHCF₂ group are new 1,1-difluorodienes which readily reacted with 4-phenyl-3H-1,2,4-triazoline-3,5-dione to give cycloadducts, derivatives of triazolo[1,2-α]cinnoline.     

On the formation of Pd(II) complexes of Trost modular ligand involving N-H activation or P,O coordination in Pd-catalyzed allylic alkylations

Specific chiral ligands have been designed by Trost et al. to perform enantioselective Pd-catalyzed allylic alkylations. It is shown that the Pd(0) complex formed by addition of the Trost ligand (4) to Pd⁰(dba)₂ is not stable in most solvents (acetone, DMF, CH₂Cl₂). Indeed, Pd⁰(dba)(4) leads to the formation of a stable Pd^II complex 5 (X-ray structure), likely by activation of the two N-H bonds of the ligand by the Pd⁰ centre. The formation of the Pd^II complex competes with the reaction of Pd⁰(4) with (E)-PhCHCH-CH(OAc)-Ph, excluding any investigation of the kinetics of the latter reaction. The ionization steps from intermediate (η²-PhCHCH-CH(OAc)-Ph)Pd⁰(4) were found to be very slow. The cationic P,P complex [(η³-Ph-CH-CH-CH-Ph)Pd(4)]⁺, expected to be generated by addition of 2 equiv. of 4 to the precursor [(η³-Ph-CH-CH-CH-Ph)Pd(μ-Cl)]₂, in the presence of a chloride scavenger, leads to a complex mixture whereas addition of 1 equiv. of 4 affords a stable bis-cationic Pd^II complex {[(η³-Ph-CH-CH-CH-Ph)Pd]₂(4)]}²⁺, (X-ray structure) via a P,O complexation of each allyl-Pd moieties. This dissymmetric P,O coordination will favour the enantioselectivity of Pd-catalyzed allylic alkylation of (E)-PhCHCH-CH(OAc)-Ph by the control of the regioselectivity of the nucleophilic attack onto the allylic ligand which is responsible of the enantioselectivity of the overall catalytic reaction.     

Optically active rhodium complexes with indenyl-linked phosphane ligands

The optically active indenyl-linked phosphane ligands (S)-[2-(3H-inden-1-yl)-1-phenylethyl]diphenylphosphane (L₁) and (S)-[2-(4,7-dimethyl-3H-inden-1-yl)-1-phenyl-ethyl]diphenylphosphane (L₂) were synthesized in three steps from (R)-1-phenylethane-1,2-diol in excellent yields. Their lithium salts reacted with [Rh(μ-Cl)(η²-CH₂CH₂)₂]₂ at −78 °C in THF affording the planar chiral complexes (S,R_pl + S_pl)-[Rh(η⁵-indenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] and (S,R_pl + S_pl)-[Rh(η⁵-4,7-dimethylindenyl-CH₂CH(Ph)PPh₂-kP)(η²-CH₂CH₂)] as 61:39 and 15:85 mixtures of diastereomers. The complexes were isolated in optically pure form by column chromatography. The stereochemical configuration of one of the diastereomers was determined by X-ray crystallography. The complexation of L₂ was studied in different solvents and with several Rh precursors and diastereomeric excesses up to 76% were achieved. The ability of the chiral ligands to control the stereochemistry at the metal center was tested by oxidative addition of methyl iodide. Diastereomeric excesses greater than 98% were observed.     

Complexes of titanium and zirconium based on [C5Me4CH2-(2-C5H4N)] ligand

Half-sandwich [η⁵:η¹-κN-C₅Me₄CH₂-(2-C₅H₄N)]MCl₃ (M = Ti (4), Zr (5)) and sandwich [η⁵-C₅Me₄CH₂-(2-C₅H₄N)][η⁵-C₅Me₅]ZrCl₂ (6) ring-peralkylated complexes have been prepared and characterized. Evidence of the intramolecular coordination of the side-chain pyridyl group both in 4 and 5 in solutions is provided by NMR spectroscopy data. Crystal structure of an adduct 5-py with one molecule of pyridine has been established by X-ray diffraction analysis.     

Molybdenum and tungsten complexes of the neutral tripod ligands HC(pz)3 and MeC(CH2PPh2)3

Starting from [M(CO)₆], seven-coordinated complexes of tungsten and molybdenum containing the facially coordinating ligands HC(pz)₃ (1) and MeC(CH₂PPh₂)₃ (2) were obtained in a two-step reaction sequence. The complexes have a 4:3 piano stool geometry with almost perfect C_S symmetry in the crystal. In solution, they show the typical fluxional behavior for seven-coordinated complexes even at low temperature. Complete oxidative decarbonylation occurs when [HC(pz)₃Mo(CO)₃] (4) or [MeC(CH₂PPh₂)₃Mo(CO)₃] (6) are treated with an excess of I₂ or Br₂.     

Synthesis and structural aspects of M-allyl (M = Ir, Rh) complexes

The synthesis, characterization and chemistry of novel η³-allyl metal complexes (M = Ir, Rh) are described. The structures of compounds (C₅Me₄H)Ir(PPh₃)Cl₂ (1), (C₅Me₄H)Ir(PPh₃)(η³-1-methylallyl)Br (3a), (C₅Me₄H)Ir(η⁴-1,3,5-hexatriene) (8), and (C₅Me₅)Rh(η³-1-ethylallyl)Br (5d) have been determined by X-ray crystallography. Structural comparisons among these complexes are discussed. It is found that the neutral metal allylic complex [Cp^∗IrCl(η³-methylallyl)] (5) ionizes in polar solvents to give [Cp^∗Ir(η³-methylallyl)]⁺Cl⁻ (6) and reaches equilibrium (5 ? 6) at room temperature. Addition of tertiary phosphine ligands to neutral complexes such as [Cp^∗Ir(η³-methylallyl)Cl], results in the formation of stable ionic phosphine adducts. Factors such as solvent, length of carbon chain, temperature and light are discussed with respect to the formation, stability and structure of the allyl complexes.     

How the interplay of different control mechanisms affects the initiator efficiency factor in controlled radical polymerization: An investigation using organometallic Mo-based catalysts

Compound CpMoI₂(iPr₂dad) (iPr₂dad = iPrNCHCHNiPr), obtained by halide exchange from CpMoCl₂(iPr₂dad) and NaI, has been isolated and characterized by EPR spectroscopy, cyclic voltammetry, and X-ray crystallography. Its action as a catalyst in atom transfer radical polymerization (ATRP) and as a spin trap in organometallic radical polymerization (OMRP) of styrene and methyl acrylate (MA) monomers has been investigated and compared with that of the dichloro analogue. Compound CpMoCl₂(iPr₂dad) catalyzes the ATRP of styrene and MA with low efficiency factors f (as low as 0.37 for MA and ethyl 2-chloropropionate as initiator), while it irreversibly traps the corresponding growing radical chains under OMRP conditions. On the other hand, compound CpMoI₂(iPr₂dad) has a greater ATRP catalytic activity than the dichloro analogue and yields f = 1 for MA and ethyl 2-iodopropionate as initiator. Under OMRP conditions, it does not irreversibly trap the growing radical chains. This comparison serves to illustrate the general principle that low initiator efficiency factors, sometimes observed in ATRP, may result from the interplay of the ATRP and OMRP mechanisms, when the latter ones involves an irreversible radical trapping process.