Investigations on the use of pneumatic cross-flow nebulizers with dual solution loading including the correction of matrix effects in elemental determinations by inductively coupled plasma optical emission spectrometry

The use of a so-called trihedral and a T-shaped cross-flow pneumatic nebulizer with dual solution loading for inductively coupled plasma optical emission spectrometry has been studied. By these devices analyte clouds from two solutions can be mixed during the aerosol generation step. For both nebulizers the correction of matrix effects using internal standardization and standard addition calibration in an on-line way was investigated and compared to elemental determinations using a conventional cross-flow nebulizer and calibration with synthetic standard solutions without matrix matching. A significant improvement of accuracy, both for calibration with internal standardization and standard addition, was obtained in the case of four synthetic solutions containing each 40 mmol L^− 1 Na, K, Rb and Ba as matrix elements and 300 μg L^− 1 Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb as analytes. Calibration by standard addition in the case of dual solution loading has been shown to be very useful in the determination of elements at minor and trace levels in steel and alumina reference materials. The results of analysis for minor concentrations of Cr, Cu and Ni in steel as well as for Ca, Fe, Ga, Li, Mg, Mn, Na, Si and Zn in alumina powder certified reference materials subsequent to sample dissolution were found to be in good agreement with the certificates. Limits of detection were found to be only slightly above those for a conventional cross-flow nebulizer and a precision better than 3% was realized with both novel nebulizers.     

Diastereoselective addition of dimethyl phosphite to 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene-2-carboxaldehyde

Addition of dimethyl phosphite to racemic 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene-2-carboxaldehyde gives almost exclusively one diastereomer of the corresponding α-hydroxyphosphonate (d.r. ?96:4). Its absolute configuration (S, R_p)-(R, S_p) was established by X-ray diffraction.     

Nitrile ligands activation in dinuclear aminocarbyne complexes

The diiron complexes [Fe(Cp)(CO){μ-η²:η²-C[N(Me)(R)]NC(C₆H₃R′)CCH(Tol)}Fe(Cp)(CO)] (R = Xyl, R′ = H, 3a; R = Xyl, R′ = Br, 3b; R = Xyl, R′ = OMe, 3c; R = Xyl, R′ = CO₂Me, 3d; R = Xyl, R′ = CF₃, 3e; R = Me, R′ = H, 3f; R = Me, R′ = CF₃, 3g) are obtained in good yields from the reaction of [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(p-NCC₆H₄R′)(Cp)₂]⁺ (R = Xyl, R′ = H, 2a; R = Xyl, R′ = Br, 2b; R = Xyl, R′ = OMe, 2c; R = Xyl, R′ = CO₂Me, 2d; R = Xyl, R′ = CF₃, 2e; R = Me, R′ = H, 2f; R = Me, R′ = CF₃, 2g) with TolCCLi. The formation of 3 involves addition of the acetylide at the coordinated nitrile and C-N coupling with the bridging aminocarbyne together with orthometallation of the p-substituted aromatic ring and breaking of the Fe-Fe bond. Complexes 3a-e which contain the N(Me)(Xyl) group exist in solution as mixtures of the E-trans and Z-trans isomers, whereas the compounds 3f,g, which posses an exocyclic NMe₂ group, exist only in the Z-cis form. The crystal structures of Z-trans-3b, E-trans-3c, Z-trans-3e and Z-cis-3g have been determined by X-ray diffraction experiments.     

A novel synthesis, including asymmetric synthesis, of 2,4,4-trisubstituted 2-cyclopentenones based on the reaction of 1-chlorovinyl p-tolyl sulfoxides with acetonitrile and its homologues

Reaction of 1-chlorovinyl p-tolyl sulfoxides, which were synthesized from chloromethyl p-tolyl sulfoxide and ketones in high overall yields, with cyanomethyllithium (lithium α-carbanion of acetonitrile) gave adducts in high to quantitative yields. The adducts were treated with LDA followed by lithium α-carbanion of the homologues of acetonitrile to give 3,5,5-trisubstituted enaminonitriles in good to high yields. Hydrolysis of the enaminonitriles under acidic conditions gave 2,4,4-trisubstituted 2-cyclopentenones in good yields. By using the optically active chloromethyl p-tolyl sulfoxide and unsymmetrical ketones, this procedure gave the optically pure 2,4,4-trisubstituted 2-cyclopentenones. The scope and limitations of this method and the mechanism of the reactions are also discussed. These procedures offer a new and effective method for the synthesis of 2,4,4-trisubstituted 2-cyclopentenones from four components, ketones, chloromethyl p-tolyl sulfoxide, acetonitrile, and its homologues.     

Soluble and polymer-supported 2- and 3-benzylated furans for the preparation of α,β-ethylenic carbonyl compounds

Soluble and polymer-supported 2- and 3-benzylated furans were subjected to a sequence involving a Diels-Alder reaction with α,β-acetylenic carbonyl compounds, a Michael addition, and a subsequent retro-Diels-Alder reaction to yield olefinic compounds. On solid support, this traceless strategy is advantageous since pure compounds were released in the thermal cycloreversion step. The fur-2-ylated resin allowed a highly diastereoselective synthesis.     

A sequential reaction process to assemble polysubstituted indolizidines, quinolizidines and quinolizidine analogues

The ω-iodo-α,β-alkynoates and their ketone, sulfone or phosphonate analogues react with δ-chloropropylamines in MeCN assisted with K₂CO₃ to undergo a sequential S_N2/Michael addition/S_N2/S_N2 reaction process, giving polysubstituted indolizidines or quinolizidines in good to excellent yields. This sequential reaction process is also compatible with three other substituted α,β-alkynoates, affording quinolizidine analogues in moderate to good yields.     

AIBN-initiated radical addition of gem-difluorinated alkyl iodides to alkynes and the Pd-catalyzed Sonogashira coupling reaction of E-phenyl difluoromethylene vinylic iodides with terminal alkynes

The addition of gem-difluorinated alkyl iodides to alkynes initiated by AIBN neatly gave the corresponding difluoromethylene vinyl iodides among which the stereoselectivity of aromatic acetylenes was high. The further coupling reaction of E-phenyl difluoromethylene vinyl iodides with terminal alkynes in the presence of catalytic palladium afforded the substituted difluorinated enynes.     

Ni添加对0.4Zr0.1V1.1Mn0.5Cr0.1合金的相结构和电化学性能的影响

本文通过XRD、SEM、EDS研究了Ti_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1Ni_x(x=0，0.2，0.4，0.6，0.8)合金的相结构和电化学性能。该合金系由BCC结构的V基固溶体主相和六方结构的C14 Laves第二相组成，Ni能够促进第二相的生成，Ni含量的增加导致了各相中的化学组成和晶格参数的变化，并通过电化学方法研究了Ni含量对_0.4Zr_0.1V_1.1Mn_0.5Cr_0.1合金电极的最大放电容量、自放电性能、高倍率放电性能、循环稳定性能等的影响。     

Synthesis of Novel Nucleoside Analog （3R）-2,3-Dideoxy-3-（N-hydroxy-N-methylamino）-L-arabinofuranosyl Uracil

The synthesis of novel nucleoside analog (3R)-2,3-dideoxy-3-(N-hydroxy-N-methylamino)-L-arabinofuranosyl uracil was studied. A twelve-step synthetic route, started from L-ascorbic acid, was designed, and the final product was obtained in 20.8% yield.     

Nucleophilic addition of bifunctional sulfimidosulfides to platinum(<Emphasis Type="SmallCaps">IV</Emphasis>)-coordinated nitriles

Reactions of the platinum(IV) nitrile complexes [PtCl₄(RCN)₂] (R = Me, CH₂Ph, Ph) with 1,2- and 1,4-PhS(=NH)C₆H₄SPh in CH₂Cl₂ afforded addition products of sulfimides and coordinated nitriles, viz., the [PtCl₄{NH=C(R)N=S(Ph)(C₆H₄SPh)}₂] complexes. The latter were isolated in 75—90% yields and characterized by elemental analysis, positive-ion FAB mass spectrometry, IR spectroscopy, and ¹H and ¹³C¹H NMR spectroscopy. The temperature dependence of the ¹H NMR spectra of the model [PtCl₄{NH=C(R)N=SPh₂}₂] complexes (R = Me, Et) in CD₂Cl₂ studied in a temperature range from +40 to -70 °C demonstrated that E—Z isomerization of the ligands is a dynamic process in a range from +40 to -10 °C. The activation free energy of this process was calculated.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1618–1622, August, 2004.