Preparation and characterization of a novel magnetized nanosphere as a carrier system for drug delivery using Plantago ovata Forssk. hydrogel combined with mefenamic acid as the drug model

The aim of the present study was to magnetize Plantago ovata Forssk. hydrogel and produce a nanosphere system to carrier mefenamic acid as the drug model. For this propose, P. ovata seeds hydrogel (POSH) was extracted and magnetized by Fe₃O₄ being functionalized using tetraethyl orthosilicate and trimethoxyvinysilane. Thereafter, mefenamic acid (MFA) was loaded on the carrier system. The final product, as the magnetic drug loaded nanosphere (Fe/POSH/MFA), was fully characterized through different techniques involving X-ray diffraction (XRD), scanning electron microscopy (SEM), vibrating-sample magnetometer (VSM), thermal gravimetric analysis (TGA), dynamic light scattering (DLS), and FT-IR spectroscopy. The results confirmed the successful production of the drug loaded nanosphere system with particles magnetization of 25 emu/g over a range size of 40–50 nm. However, the size distribution less than 100 nm was measured through DLS analysis. The hydrogel showed a pH sensitivity swelling behavior representing the best efficacy at pH 7.4. The efficiency of the drug encapsulation was found to be 64.35%. The drug releasing was studied using a dialysis bag at pH = 7.4. The highest in vitro drug releasing was found to be 57.3 ± 0.6% after 72 h, as well. The findings of the current report account for the potential use of P. ovata hydrogel as an effective delivery system for encapsulation of water insoluble basic drugs, e.g., MFA in a magnetized carrier system.     

二价阳离子诱导细胞膜融合的和频光谱研究（英文）

细胞膜融合是一种重要的基础生物学过程,细胞的很多生物学功能都涉及到细胞膜的融合.二价阳离子可以通过与带负电磷脂的结合诱导磷脂膜的融合,然而,其详细的分子学机制目前还不太清楚.本文应用表/界面敏感的和频振动光谱结合动态光散射实验研究了磷脂分子层对二价金属离子(如Ca²⁺和Mg²⁺)暴露的响应.动态光散射实验测量的粒度分布结果显示Ca²⁺可以诱导囊泡间融合,而Mg²⁺的介导却不能导致磷脂膜的融合.为了应用和频光谱研究磷脂分子不同基团对金属离子的响应,本文设计了十八烷基三氯硅烷自组装单分子层/磷脂单分子层组成的混合模型膜系统进行和频振动光谱实验.实验发现,相比于Mg²⁺,Ca²⁺与磷脂头部基团PO₂^-有更强烈地相互作用,会更容易诱导细胞膜融合.和频光谱实验还显示,虽然两种金属阳离子没有与磷脂中C=O基团直接连接.但是Ca²⁺/Mg²⁺-PO₂^-...     

Influence of particle size on the SARS-CoV-2 spike protein detection using IgG-capped gold nanoparticles and dynamic light scattering

Due to the unprecedented and ongoing nature of the coronavirus outbreak, the development of rapid immunoassays to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its highly contagious variants is an important and challenging task. Here, we report the development of polyclonal antibody-functionalized spherical gold nanoparticle biosensors as well as the influence of the nanoparticle sizes on the immunoassay response to detect the SARS-CoV-2 spike protein by dynamic light scattering. By monitoring the increment in the hydrodynamic diameter (ΔD_H) by dynamic light scattering measurements in the antigen–antibody interaction, SARS-CoV-2 S-protein can be detected in only 5 min. The larger the nanoparticles, the larger ΔD_H in the presence of spike protein. From adsorption isotherm, the calculated binding constant (K_D) was 83 nM and the estimated limit of detection was 13 ng/mL (30 pM). The biosensor was stable up to 90 days at 4 °C. Therefore, the biosensor developed in this work could be potentially applied as a fast and sensible immunoassay to detect SARS-CoV-2 infection in patient samples.     

Pre-irradiation of surfactants to enhance their capacity to solubilise drugs and dyes

The present work has used pre-irradiation of surfactants in order to enhance their capacity to solubilize hydrophobic drugs and dyes. Aqueous solution of two pluronic surfactants viz., F-127 and P-123 were subjected to gamma radiation. These irradiated surfactant solutions were used to solubilize five drugs such as ornidazole, tinidazole, ciprofloxacin, aceclofenac, and methylparaben, and two dyes, methyl orange and eosin yellow. Their capacity for enhancing solubilisation was compared with that of unirradiated surfactants. The irradiated surfactant solutions displayed 0.88%–31.9% higher solubilisation compared to unirradiated surfactant solutions. This phenomenon of enhancement in solubility is explained through changes in the physical properties like decreased surface tension and increased hydrodynamic radius in irradiated block polymeric surfactants. Irradiation of surfactants for enhancing their capacity to solubilize hydrophobic chemical entities has been used for the first time.     

Coagulation-crossflow microfiltration of domestic wastewater

The effect of using alum, polyaluminum silicate sulfate (PASS), and lime as coagulants on the performance of crossflow microfiltration of domestic wastewater was investigated. The primary membrane used throughout the study was made of woven polyester, while the dynamic membrane was formed by circulating MnO₂ precipitate. Slug doses of the coagulants were added to the circulation tank of the experimental setup at the beginning of each run. Doses of 20 to 120 mg/l of alum were investigated at pH of 7. The results showed an improvement in flux values with the increase in alum dose until an optimum dose beyond which no significant improvement was seen. Flux improvement was attributed to the agglomeration of particles which can be easily swept away by the shearing actions created by the crossflow velocity. Permeate quality was not found to be significantly affected by the increase in alum dose. PASS, which is an aluminum salt, was seen to behave in the same manner as alum when used as a coagulant. Lime was not found to be a suitable coagulant under these conditions.     

Electron beam irradiated polyamide-6,6 films—II: mechanical and dynamic mechanical properties and water absorption behavior

Electron beam irradiation of poly(iminohexamethylene-iminoadipoyl) (Polyamide-6,6) films was carried out over a range of irradiation doses (20–500 kGy) in air. The mechanical properties were studied and the optimum radiation dose was 200 kGy, where the ultimate tensile stress (UTS), 10% modulus, elongation at break (EB) and toughness showed significant improvement over the unirradiated film. At a dose of 200 kGy, the UTS was improved by 19%, the 10% modulus by 9% and the EB by 200% over the control. The dynamic mechanical properties of the films were studied in the temperature region 303–473 K to observe the changes in the glass transition temperature (T_g) and loss tangent (tan δ) with radiation dose. The storage modulus of the film receiving a radiation dose of 200 kGy was higher than the unirradiated film. The water uptake characteristics of the Polyamide-6,6 films were investigated. The water uptake was less for the films that received a radiation dose of 200 and 500 kGy than the unirradiated film. The role of crystallinity, crosslinking and chain scission in affecting the tensile, dynamic mechanical and water absorption properties was discussed.     

Comparison of chromatographic ion-exchange resins IV. Strong and weak cation-exchange resins and heparin resins

A comparative study was performed on heparin resins and strong and weak cation exchangers to investigate the pH dependence, efficiency, binding strength, particle size distribution, static and dynamic capacity, and scanning electron microscopy pictures of chromatographic resins. The resins tested include: Heparin Sepharose FF, SP Sepharose FF, CM Sepharose FF, Heparin Toyopearl 650 m, SP Toyopearl 650 m, CM Toyopearl 650 m, Ceramic Heparin HyperD M, Ceramic S HyperD 20, and Ceramic CM HyperD F. Testing was performed with four different proteins: anti-FVII Mab (IgG), aprotinin, lysozyme, and myoglobin. Dependence of pH on retention was generally very low for proteins with high isoelectric point (pI), though some decrease of retention with increasing pH was observed for CM Ceramic HyperD F and S Ceramic HyperD 20. Binding of anti-FVII Mab with pI < 7.5 was observed on several resins at pH 7.5. Efficiency results show the expected trend of increasing dependence of the plate height with increasing flow rate of Ceramic HyperD resins followed by Toyopearl 650 m resins and the highest flow dependence of the Sepharose FF resins corresponding to their pressure resistance. Determination of particle size distribution by two independent methods, coulter counting and SEM, was in good agreement. Binding strength of cation-exchange resins as a function of ionic strength varies depending on the protein. Binding and elution at high salt concentration may be performed with Ceramic HyperD resins, while binding and elution at low salt concentration may be performed with model proteins on heparin resins. Employing proteins with specific affinity for heparin, a much stronger binding is observed, however, some cation exchangers may still be good substitutions for heparin resins. Dynamic capacity at 10% breakthrough compared to static capacity measurements and dynamic capacity displays that approximately 40-80% of the total available capacity is utilized during chromatographic operation depending on flow rate. A general good agreement was obtained between results of this study and data obtained by others. Results of this study may be used in the selection of resins for testing during protein purification process development.     

Rapid separation of protein isoforms by capillary zone electrophoresis with new dynamic coatings

Many cellular functions are regulated through protein isoforms. Changes in the expression level or regulatory dysfunctions of isoforms often lead to developmental or pathological disorders. Isoforms are traditionally analyzed using techniques such as gel- or capillary-based isoelectric focusing. However, with proper electro-osmotic flow (EOF) control, isoforms with small pI differences can also be analyzed using capillary zone electrophoresis (CZE). Here we demonstrate the ability to quickly resolve isoforms of three model proteins (bovine serum albumin, transferrin, alpha1-antitrypsin) in capillaries coated with novel dynamic coatings. The coatings allow reproducible EOF modulation in the cathodal direction to a level of 10(-9) m2V(-1)s(-1). They also appear to inhibit protein adsorption to the capillary wall, making the isoform separations highly reproducible both in peak areas and apparent mobility. Isoforms of transferrin and alpha1-antitrypsin have been implicated in several human diseases. By coupling the CZE isoform separation with standard affinity capture assays, it may be possible to develop a cost-effective analytical platform for clinical diagnostics.     

INVESTIGATION OF STRUCTURE AND PROPERTIES FOR POLYMER SYSTEMS BASED ON DYNAMIC RHEOLOGICAL APPROACHES

The dynamic theological measurements have been a preferred approach to the characterization of the structure and properties for multi-component or multi-phase polymer systems, due to its sensitive response to changes of structure for these heterogeneous polymers. In the present article, recent progresses in the studies on dynamic theology for heterogeneous polymer systems including polymeric composites filled with inorganic particles, thermo-oxidized polyolefins, phaseseparated polymeric blends and functional polymers with the scaling and percolation behavior are reviewed, mainly depending on the results by the authors‘ group. By means of theological measurements, not only some new fingerprints responsible for the evolution of morphology and structure concerning these polymer systems are obtained, the corresponding results are also significant for the design and preparation of novel polymer-based composites and functional materials.     

2,2,6,6-Tetramethylcyclohexanethione S-methylide, a highly hindered thiocarbonyl ylide: two-step cycloadditions

The switching from the concerted 1,3-dipolar cycloaddition to a two-step pathway via zwitterionic intermediates requires a major energy difference between HOMO-LUMO energies of 1,3-dipole and dipolarophile, as well as sterically demanding reactants. In contrast to previously studied models, the title compound 1C, a thiocarbonyl ylide prepared by N₂ extrusion from dihydrothiadiazole 7C at 80 °C, combined with 2,3-bis(trifluoromethyl)fumaronitrile (11) to give a zwitterion (gauche-10); the latter failed to close the thiolane ring by 1,5-cyclization, but formed the seven-membered ketene imine 9C by 1,7-cyclization. X-ray analysis of 9C revealed an angle-deformed cumulated bond system and a transoid relation of the CF₃ groups. The relatively stable 9C allowed ¹⁹F NMR recordings from −90 to +90 °C; temperature-dependent line broadening resulted from equilibration with ≤1% of an unknown isomer. Among various possible angle-strained rate processes, an inversion transoid19?cisoid20 is preferred which involves a topomerization at the CN bond; lateral inversion and rotation are discussed. At 80 °C in solution, ketene imine 9C slowly suffered fragmentation to give trans- and cis-1,2-bis(trifluoromethyl)cyclopropane-1,2-dicarbonitrile (13)+thioketone 6C by intramolecular substitution. The reaction of 1C with ethenetetracarbonitrile furnished a tetracyanothiolane 3C, whereas 1C and dimethyl 2,3-dicyanofumarate ((E)-26) afforded thiolanes of the same trans,cis-ratio as 1C with dimethyl 2,3-dicyanomaleate ((Z)-26); a preceding (E,Z)-equilibration of 26 thwarts mechanistic conclusions. When the solvent contained water or methanol, short-lived ketene imines 4C and 31 were intercepted.