Electrode processes in the oxidation of tetrahydroisoquinoline derivatives

The electrochemical oxidation of the alkaloid laudanosine (Ia) to O-methylflavinantine (II) has been studied in acetonitrile solvent. Using cyclic voltammetry, rotating disc voltammetry and preparative electrolyses on several alkaloids, simple aliphatic amines and aromatic compounds, some aspects of the mechanism of this coupling reaction are elucidated. The first anodic wave for laudanosine at platinum has E_p=0.55 V vs. Ag/Ag⁺. The electrode rapidly becomes partially passivated at potentials above 0.5 V. This is due to a film which “dissolves” below 0.5 V, at a rate independent of the potential. It is shown that the reaction (Ia)→(II) proceeds at 0.5 V by initial oxidation of the amine moiety. If acids such as sodium bicarbonate are added to the anolyte the amine is protonated causing the first wave to disappear. Oxidation at 1.1 V under these acidic conditions produces the same product, but more rapidly and in significantly higher yield because electrode filming and side reactions resulting from the amine oxidation are abrogated.     

The synthesis of cypridina etioluciferamine and the proof of structure of cypridina luciferin

An unambiguous synthesis of Cypridina etioluciferamine was accomplished in order to prove the structure of this important bioluminescent natural product. Several 2-aminopyrazine 1-oxides were synthesized in order to establish a spectroscopic method for determining the placement of substituents on the pyrazine nucleus of Cypridina etioluciferamine. Titanium tetrachloride was used to improve the yields of these compounds; for example, the yield of 2-amino-3-methyl-5-phenylpyrazine 1-oxide (19) from reaction of phenylglyoxal 1-oxime and α-aminopropionitrile was raised from 3% to 51% by the use of titanium tetrachloride. The pyrazine ring proton is found at τ 1·37 (DMSO-d₆). The isomeric 2-amino-3-methyl-6-phenylpyrazine 1-oxide (22) was similarly prepared and its pyrazine ring proton is found at τ 2·18. This large difference (0·81 ppm) in chemical shift was used to determine whether a 2-aminopyrazine 1-oxide was 5- or 6- substituted. Prepared in an analogous fashion were 2-amino-5-(indol-3-yl)-3-methylpyrazine 1-oxide (23) and 2-amino-5-(indol-3-yl)-3-(3-phthalimidopropyl)pyrazine 1-oxide (16). The structures of these compounds were verified by NMR spectroscopy. By treatment with Raney nickel and hydrogen gas, then 100% hydrazine hydrate, 16 was converted to 2-amino-3-(3-aminopropyl)-5-indol-3-ylpyrazine (5), isolated as the dihydrochloride. This compound, with the indole moiety definitely placed at C-5, is identical with Cypridina etioluciferamine dihydrochloride (IR, UV, TLC). These results show that the structures of Cypridina etioluciferamine and luciferin are correct as published.     

Elektronenlokalisierung im Grundzustand und in angeregten Zuständen Pars-Orbital-Methode, 12. Mitt

UsingGleason's theorem the pars orbital concept is developed for excited states of conjugated systems described by CI-methods. A significance index is introduced to evaluate different patterns of fragmentation. The usefulness of this approach is illustrated for butadiene, biphenyl, naphthalene, and azulene.

11. Mitt.:H. Karpf, O. E. Polansky undM. Zander, Tetrahedron Lett.1978, 2069.     

Separation and concentration of molybdenum(VI) and tungsten(VI) with chelating ion-exchange resins containing sulphur ligands

Three chelating ion-exchange resins based on macroreticular polyacrylonitrile-divinylbenzene copolymers with thioglycollic acid and cysteine as functional groups have been tested for separation of molybdenum(VI) and tungsten(VI). On a short column of the thioglycollic acid resin, molybdenum(VI) and tungsten(VI) can be selectively sorbed from pH-4.3 acetate buffer and eluted with 2M hydrochloric acid and a mixture of 0.1M sodium hydroxide and 0.1M sodium chloride, respectively, with quantitative recovery even at very low concentrations. Simulated sea-water samples have been analysed.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Laser-pulse photocurrent transient measurements at oxygen evolving n-PtS2

Laser-pulse transient measurements have been performed at single crystalline n-PtS₂ electrodes with the aim of understanding light-induced hydroxide, oxide and oxygen formation. Different detected time constants permit the identification of distinct reaction products. They form surface states which function both as centers for recombination and charge accumulation in the interface. The rate constants determined are influenced by the RC-constant of the measuring circuit and can be interpreted only qualitatively. In the presence of recombination processes time constants faster than R_LC_SC are found. Evidence is given that the reaction step leading to oxygen evolution is dependent on the building-up of an electric field in the Helmholtz layer. This result may be of importance for the development of materials for the photoelectrolysis of water.     

Analytical applications of picolinealdehyde salicyloylhydrazone: Spectrophotometric determination of nickel and zinc

With a view to the use of picolinealdehyde salicyloylhydrazone as analytical reagent, a study of the physical properties and chemical reactions of this substance has been carried out. It reacts with nickel (λ_max = 375 nm, ? = 3.9 × 10⁴M^?1cm^?1) or zinc (λ_max = 365 nm, ? = 4.8 × 10⁴M^?1cm^?1) to produce a yellow 1:2 complex in both cases. Spectrophotometric determinations of trace amounts of nickel and zinc have been established.     

Correlation of the position of the bond functions in H-X with electronegativity

S type Gaussian bond functions are optimized for HF, H₂O, NH₃, and CH₄. The optimization is carried out with respect to the exponent and position in the H-X bond. The position is found to correlate well with the electronegativity of Pauling and Allred-Rochow.     

The intermolecular potential function of Smith–Thakkar type for C60

The intermolecular potential function of Smith–Thakkar type for C₆₀ has been proposed, and its expression is as follows

The unit of u(r) is J/mol, r is the distance between two C₆₀ molecules center and the unit is nm. Some properties of C₆₀ in the gas and crystal have been studied using the interaction potential of Smith–Thakkar type, such as stability of C₆₀ crystals, virial coefficient and lattice dynamics.     

Kinetic determination of microamounts of some sulphur-containing ligands

Some sulphur-containing ligands have been shown to inhibit the Hg(II)-catalysed substitution of p-nitrosodiphenylamine (p-NDA) for cyanide in hexacyanoferrate(II), by binding the mercury(II). This effect is used for determination of microamounts of cysteine, thioglycollic acid and thiosulphate. The reactions are followed spectrophotometrically at 640 nm (lambda(max) of [Fe(CN)(5).p-NDA](3-)). The determination range depends on the amount of mercury(II) added and the stability of the Hg(II)-ligand complex. Under specified conditions, the detection limits are: thioglycollic acid 1 x 10(-7)M, cysteine 1 x 10(-6)M and thiosulphate 4 x 10(-7)M.