新的脉冲进样AAS法测定“麻杏石甘汤”中的微量金属元素

本文研制了一种新的脉冲进样装置，用于火娄原子吸收分光光度法测定中药煎剂中的Ｃａ，Ｍｇ，Ｆｅ，Ｍｎ，Ｚｎ五种金属元素含量，实验表明，利用此种装置可以同时获得两种进样方式的分析结果，线性范围比常规法宽两倍，耗样量，精密度及分析速度均优于常规法。     

Comparison of slurry sampling and microwave-assisted digestion for calcium, magnesium, iron, copper and zinc determination in fish tissue samples by flame atomic absorption spectrometry

The development of a slurry sampling method for the determination of calcium, copper, iron, magnesium and zinc in fish tissue samples by flame atomic absorption spectrometry is described. In comparison with microwave-assisted digestion, the proposed method is simple, requires short time and eliminates total sample dissolution before analysis. Suspension medium was optimized for each analyte to obtain quantitative recoveries from fish tissue samples without matrix interferences. Nevertheless, iron recoveries higher than 46% were not found. Treatment of samples slurried in nitric acid by microwave irradiation for 15-30 s at 75-285 W permitted to achieve efficient recoveries for calcium, iron, magnesium and zinc. Further improvement in the matrix effects for iron determination was accomplished by the use of an additional step of short microwave-assisted suspension treatment. However, standard addition method was required for calcium and copper determination, being necessary hydrochloric acid as suspension medium for the last one. Although copper could not be determined in the certified reference material using microwave-assisted digestion, the accuracy of the slurry sampling method was verified for all the investigated analytes. Detection limits were 22.8 ± 8.0, 0.884 ± 0.092, 5.07 ± 0.76, 35.5 ± 0.7 and 1.17 ± 0.04 μg g⁻¹ for calcium, copper, iron, magnesium and zinc, respectively. The standard deviations obtained using slurry sampling method and microwave-assisted digestion were not significantly different, and the mean relative standard deviation of the over-all method (n = 3) of the slurry sampling method for different concentration levels was below 12%.     

ICP-AES detection of silicon carbide impurities volatilized in a graphite furnace with the use of carbon tetrachloride vapour

The analytical capability of high-temperature halogenation with carbon tetrachloride vapour in a graphite furnace was investigated for silicon carbide powder with known chemical composition and particle size. Intensity vs heating time curves were determined for analytical lines of Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Ti, V and Si constituents, volatilized with and without the presence of CCl₄ vapour in the furnace atmosphere. Igniting 10 mg SiC at 2100 °C for 60 s in chlorinating atmosphere, the evaporated fraction of most of the constituents was higher than 90% (for Al about 50%). The line intensity vs sample mass (4–26 mg) relationships were linear for all impurities studied, while the intensity of silicon line showed a relatively small change with the sample mass. BEC (background equivalent concentration) values for this solid sampling technique (10 mg loaded sample) were 2–20 fold lower than those calculated for the conventional solution sample introduction method.     

Determination of mercury in soils and sediments by graphite furnace atomic absorption spectrometry with slurry sampling

A graphite furnace atomic absorption spectrometric procedure for the determination of mercury is presented, in which the samples are suspended in a solution containing hydrofluoric and nitric acids. Silver nitrate (4% m/v) and potassium permanganate (3%) are incorporated, in the order specified, and aliquots are directly introduced into the graphite furnace. A fast heating programme with no conventional pyrolysis step is used. The detection limit for mercury in a 125 mg ml⁻¹ suspension is 0.1 μg g⁻¹. Calibration is performed by using aqueous standards. The reliability of the procedure is proved by analysing certified reference materials.     

双金属氰化物络合物催化环氧烷烃开环聚合的特征

合成了Co Zn双金属氰化物 (DMC)络合物催化剂 ,以X 射线衍射、元素分析、红外光谱等手段进行了表征 ,考察了该催化体系下环氧丙烷开环聚合的反应特性 ,并初步探讨了聚合反应的机理 .研究发现 ,Co Zn双金属氰化物催化剂具有很高的催化活性 ,适合于中高分子量聚醚的合成 ,但是碱性起始剂起阻聚作用 ;在该催化体系下聚合物分子量可控 ,不饱和度很低 (<0 .0 14meq g) ,分批加料聚合所得到的聚合物分子量分布较窄 (Mn Mw <1.4 ) ,而一步加料聚合所得到的聚合物分子量分布变宽 ;1 3C NMR分析表明聚合物主链具有无规立构分布的特点 ,且链节分布几乎都为头 尾方式 .聚合过程中活性链与非活性链之间可能存在一个交换反应 ;虽然聚合反应有终止 ,但与聚合物链长没有关系 ,聚合物链的终止是可逆的 .     

碳酸氢铵制纯碱的研究

本文对“中间盐”复分解制碱法进行了研究。“中间盐”的加入不能使两个三盐共饱和点在干盐图上发生明显的移动,但能使三盐介稳平衡点的介稳期延长,从而使得用碳酸氢铵和食盐通过复分解制碱成为可能。     

Direct determination of manganese in vitamin-mineral tablets using solid sampling electrothermal atomic absorption spectrometry

Manganese in vitamin-minerals tablets was determined by solid sampling electrothermal atomic absorption spectrometry (SS-ETAAS) using three different calibration methods, namely calibration against aqueous standards, standard addition with aqueous standards on solid samples and calibration against solid certified standards. Samples were only finely ground and introduced directly into the furnace by means of solid autosampler system without any dissolving process. Effects of different calibration techniques, temperatures and heating rates of atomization and pyrolysis steps on the accuracy and precision of the analyte elements were investigated. After optimization of the experimental parameters, there is good agreement (at 95% confidence level) between the results obtained by solid sampling and those obtained by acid digestion of samples.     

排序集抽样下Inverse Rayleigh分布的Fisher信息量及其在参数估计中的应用

文章分别在简单随机抽样和排序集抽样下研究了Inverse Rayleigh分布中对应样本所含刻度参数θ的Fisher信息量.数值结果表示,同等样本容量的排序集样本比简单随机样本提供更多关于θ的信息.接着分别基于简单随机样本和排序集样本构造了θ的一些优良估计,并对估计结果进行了数值比较.     

Left invariant special Kähler structures

We construct left invariant special Kähler structures on the cotangent bundle of a flat pseudo-Riemannian Lie group. We introduce the twisted cartesian product of two special Kähler Lie algebras according to two linear representations by infinitesimal Kähler transformations. We also exhibit a double extension process of a special Kähler Lie algebra which allows us to get all simply connected special Kähler Lie groups with bi-invariant symplectic connections. All Lie groups constructed by performing this double extension process can be identified with a subgroup of symplectic (or Kähler) affine transformations of its Lie algebra containing a nontrivial 1-parameter subgroup formed by central translations. We show a characterization of left invariant flat special Kähler structures using étale Kähler affine representations, exhibit some immediate consequences of the constructions mentioned above, and give several non-trivial examples.     

On a double degenerate fourth-order parabolic equation

The existence of solutions to a fourth-order p-Laplacian equation with boundary degeneracy is studied. For the purpose of solving the corresponding non-degenerate (with respect to the coefficient of fourth-order term) regularized problem, a fourth-order semi-discrete elliptic problem with homogeneous boundary conditions is established and its existence and uniqueness are obtained by the functional minimization method. It follows that the approximate solutions of the non-degenerate parabolic problem are constructed and the corresponding existence and uniqueness are discovered by a limit procedure from the energy estimation method and a compactness argument. Finally, the existence and regularity of solutions for the problem with boundary degeneracy is obtained by using a regularization parameter vanishing limit.