Slurry sampling for determination of lead in marine plankton by electrothermal atomic absorption spectrometry

A slurry sampling method has been developed for the determination of Pb in marine plankton by ETAAS using a freshwater plankton certified reference material (CRM 414). Slurries were prepared in 1–3% m/v range with 1% v/v HNO₃ by ultrasonic agitation for 5 min. The effects of several chemical modifiers, including Ir(NO₃)₂, Mg(NO₃)₂, Pd(NO₃)₂, Pd(NO₃)₂ + Mg(NO₃)₂, and Mg(NO₃)₂ + NH₄H₂PO₄, were investigated for the stabilization of Pb during thermal pretreatment. Lead in slurries was effectively stabilized up to 1000 °C with Ir, Pd and Pd + Mg modifiers among which Pd + Mg provided the best results with complete atomization at 1850 °C. Firings in the presence of Ir were, problematic due to ash formation inside the atomizer. Water, dilute HNO₃ and HF were examined as suspension medium. Dilute HNO₃ (1–2% v/v) proved to be advantageous over water as it afforded extraction of Pb from plankton almost quantitatively in 5 min agitation. Hydrofluoric acid was the least suitable medium. Increasing HF concentration up to 5% v/v resulted in inaccuracy and substantial background absorption. Fast-heating furnace method provided comparable accuracy and precision to that of conventional-heating in slurries of CRM 414. Detection limits and characteristic masses were, respectively, 0.49 μg L^− 1 and 32 pg for the conventional method and 0.62 μg L^− 1 and 37 pg for the fast-heating method. However, fast-heating approach suffered from distorted peaks at high temperatures and incomplete pyrolysis of matrix at lower temperatures. Analysis of marine plankton samples for Pb was performed by using the conventional furnace program. The results showed a high correlation with those obtained by solution ICP-MS. Differences were statistically insignificant within 95% confidence interval.     

X射线荧光光谱铝环-双层压片法测定土壤中常量和微量元素

本文提出用铝环-双层压片法制片,经验系数法校正吸收-增强效应,对少量土壤样品中的常量和微量元素进行了定量测定。取样量为500 mg,制样与测量精确度好于5%,用本法对标样的分析表明,分析值与推荐值基本一致,本法具有简单、快速、成本低的特点,适用于少量样品的分析。     

Needle-like calcium carbonate assisted self-assembly of mesostructured hollow silica nanotubes

Mesostructured hollow silica nanotubes (MHSNTs) were successfully produced via the self-assembly of C₁₆TMABr and silica species on the surface of needle-like calcium carbonate nanoparticles in an alkaline medium at room temperature. The characterization of MHSNTs by transmission electron microscopy (TEM), scanning electron microscopy (SEM), pore size distribution (PSD) and Brunauer-Emmett-Teller (BET) indicated that MHSNTs had uniform tubular hollow structures with big openings, a length of 1.5-2.0 μm, an inner diameter of 150-200 nm at the open end and 50-60 nm at the closed end, and a wall thickness of 20-30 nm, as well as a narrow PSD around 2.3 nm in the shells and a BET surface area as high as ∼975.3 m²/g. By small-angle X-ray diffraction (XRD), BET and pore structure analysis, it was found that more uniformly structured mesopores could be formed by the method of removing the double templates simultaneously through a solvent extraction process, as compared to the separate removal of the double templates by calcinating and then etching in an acidic solution, and the amount of C₁₆TMABr affected the mesoporous structures of MHSNTs greatly. The formation processes of MHSNTs were also studied with XRD and FTIR.     

Bioactive steroidal glycosides from the marine sponge Erylus lendenfeldi

Bioassay-guided fractionation of the methanol extract of Erylus lendenfeldi using engineered strains of budding yeast (Saccharomyces cerevisiae) has resulted in the isolation of the known compound eryloside A (1) and two new compounds, erylosides K (2) and L (3). The structures were established based mainly on 1D and 2D NMR data. The absolute stereochemistry of eryloside A, which had never been fully characterized, was determined using the modified Mosher's method. The absolute stereochemistry of eryloside K was determined by comparison with tetrahydroeryloside A. Compounds 1-3 exhibited selective cytotoxicity against a yeast strain (Δrad50) deficient in double strand break (DSB) repair.     

Designing a contaminated soil sampling strategy for human health risk assessment

Human health risk assessment is a site-based approach used to identify the potential health hazards which are induced by an old site contamination. For a proper evaluation of the daily doses of contaminants to which people will be exposed given the future occupation of the site, both a characterization and a quantification of soil pollution are needed. Such information can be provided by soil sampling. Thus the choice of the location, the number, depth and type of soil samples is very important and ought to follow a well-defined strategy. A review of contaminated site sampling practices in Europe and North America could not identify any completely formalized sampling strategy for human health risk assessment. On the contrary there are several approaches which can be roughly classified into two categories: a systematic sampling scheme over the whole site, on the one hand, and a sampling design driven by an initial knowledge of the contamination sources and fitted to the suspected pollution pattern, on the other. The first approach provides a complete coverage of the site but it may be rather expensive and entail useless sampling. The performance of the second depends on the quality of prior information. Actually both methods can be combined as explained hereafter. In view of the specificity of each site, the requirements of health risk assessment and the time and cost constraints, it seems difficult to work out a typical soil sampling strategy suitable for all sites. However, some recommendations can be made according to the site dimensions, the nature, degree and heterogeneity of contamination, and the (future) use of the site. The scientist should thus rely on a thorough examination of all available information (site history, geology and hydrogeology, soil properties, contaminants behaviour , etc.) to delimit contaminated areas as homogeneous as possible and then distribute the sampling points (e.g.using a sampling grid). They should also take the potential exposure paths into account in order to define the areas and soil strata to be sampled as a priority. Statistical and geostatistical tools can be helpful for formulating a sampling strategy as well as for interpreting the collected data. Received: 7 December 2001 Accepted: 24 February 2002     

Analytical chemistry and the cone penetrometer: In situ chemical characterization of the subsurface

The development of novel microanalytical techniques forin situ chemical characterization of the terrestrial subsurface environment has grown significantly over the last decade, particularly those instruments that are interfaced to the cone penetrometer. Cone penetrometer testing (CPT) has emerged as an effective means to introduce samplers and probes forin situ analysis of contaminants in soil and groundwater matrices. A variety ofin situ chemical samplers for CPT have been developed that can be driven into the subsurface to collect soil gas, groundwater, or soil samples at depth, thus providing a means of determining the vertical and horizontal extent of contamination. Cone penetrometer testing is also being explored as a means to deliverin situ subsurface sensor probes, including probes based on laser-induced fluorescence, Raman, and infrared spectroscopies for organics; on laser-induced breakdown and X-ray fluorescence spectroscopies for heavy metals; and on passive gamma-ray spectroscopy for radionuclides. The range of analytical technologies used in CPT for the determination of organic and inorganic species in the subsurface is described.     

Synthesis of chiral β-3-amino-2-hydroxyalkanoates and 3-alkyl-3-hydroxy-β-lactams by double asymmetric induction

Reactions of chiral (2S)-enolates of dioxolan-4-ones, derived from lactic, mandelic, and phenyllactic acids, with aliphatic (S_S)- and (S_R)-tert-butylsulfinyl aldimines afforded conformationally restrained C2-disubstituted N,O-orthogonally protected 3-amino-2-hydroxyalkanoates in the form of N-sulfinyl protected 1′-aminodioxolan-4-ones. The product distribution showed that there is significant kinetic selectivity, due to the presence of ‘matched’ and ‘mismatched’ components, between the (S)- or (R)-tert-butylsulfinyl aldimines and the (2S)-enolates of the 1,3-dioxolan-4-ones. Selective methoxide-induced removal of the acetal group of the N-sulfinyl-1′-aminodioxolanones yielded the corresponding N-sulfinyl protected methyl alkanoates. In addition, the selective acid-induced removal of the sulfinyl group of the N-sulfinyl-1′-aminodioxolanones provided the corresponding N-unprotected 1′-aminodioxolanones, whose base-induced cyclization afforded the corresponding β-lactams.     

Investigation of a cylindrical chemosorptive denuder for sampling and phase separation of toluene diisocyanate aerosols

A cylindrical chemosorptive denuder in series with a glass fibre filter has been evaluated for sampling toluene diisocyanate (TDI) aerosols. The sampler is designed for measuring personal exposure to diisocyanates. Several denuder coatings and derivatising reagents were investigated. Dimethylpolysiloxane (SE-30) and 5% phenyl dimethylpolysiloxane (SE-54) with either dibutylamine (DBA) or dipentylamine (DPeA) as derivatising reagents yielded the lowest vapour breakthrough (the amount (%) of the vapour that passes through the denuder), close to values predicted by theory. Immobilisation of the SE-30 denuder coating by in-situ cross-linking yielded comparable results. With an SE-30/DBA-coated denuder operating within an airflow range of 100–500 mL min^–1, the phase separation was shown to be consistent with theoretical predictions derived by use of the Gormley–Kennedy equation. This provides a means of calculating the vapour breakthrough and correcting experimentally obtained values with regard to vapour–particulate phase distribution, suggesting that the denuder can provide accurate phase-distribution measurements. The SE-30/DBA denuder can be used over a concentration range spanning nearly six orders of magnitude. Its capacity is sufficient to perform 15-min exposure measurements of a TDI aerosol with air concentrations as high as 1,700 g m^–3, 40 times higher than the Swedish occupational exposure limit (OEL). At the other end of the range, the estimated limit of detection (LOD) was less than 2 ng m^–3 for both the vapour and the aerosol phases when LC–ESI–MS–MS was used for chemical analysis.Electronic Supplementary Material Supplementary material for this article is available at     

Double bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene to 5-ethylidenebicyclo[2.2.1]hept-2-ene over alkaline earth oxides

All the alkaline earth oxides exhibit activities for double, bond isomerization of 5-vinylbicyclo[2.2.1]hept-2-ene (VBH) to 5-ethylidenebicyclo[2.2.1]hept-2-ene (EBH) at a reaction temperature of 273 K. The order of the activity on the basis of unit weight of catalyst was CaO>MgO>SrO>BaO when compared under optimum pretreatment conditions. The E/Z ratio in the products is determined by the reaction temperature regardless of the type of catalyst; the ratios were 82/18 and 88/12 for the reaction temperatures of 323 and 273 K, respectively.     

SPME-GC-MSD for Determination of Nine Phenyl Compounds in Snow Water in Beijing China

Solid phase microextraction (SPME) then capillary gas chromatography with mass spectrometric detection have been used for determination of nine phenyl compounds in snow water in Beijing City. Headspace extraction with a fiber coated with 100 µm PDMS was used to extract the compounds. Extraction and desorption times were optimized at 8 and 2 min, respectively. Relative standard deviation (RSD) of the analytical method was found to be less than 5%. The linear range was wide and limits of detection were less than 5 ng mL⁻¹ for the nine target analytes. Several phenyl compounds at ng mL⁻¹ levels were detected in snow samples in Beijing, indicating the corresponding air pollution.