差分脉冲伏安法同时测定α-山竹黄酮和γ-山竹黄酮

研究了α-山竹黄酮和γ-山竹黄酮在玻璃碳电极上的电化学行为,研究了pH和静置时间等因素的影响,探讨了α-山竹黄酮和γ-山竹黄酮在玻璃碳电极上的氧化机理,建立了差分脉冲伏安法同时测定α-山竹黄酮和γ-山竹黄酮的方法。在pH 3.1的BR缓冲介质中,α-山竹黄酮在0.822 V产生灵敏的氧化峰,γ-山竹黄酮在0.426 V和0.700 V产生灵敏的氧化峰。对α-山竹黄酮,相应的氧化峰的峰高与浓度在5.00×10-6mol/L~2.00×10-4mol/L范围内呈良好的线性关系,线性相关系数为0.9950;对γ-山竹黄酮,其在0.426 V氧化峰的峰高与浓度在2.00×10-5mol/L~6.00×10-4mol/L浓度范围内呈良好的线性关系,线性相关系数为0.9904。该方法测量2.00×10-4mol/L的α-山竹黄酮和γ-山竹黄酮相对标准偏差分别为3.3%和4.1%(n=10)。     

Simultaneous Voltammetric Determination of Three Herbicides in Food and Water Samples with the Aid of Chemometrics

Differential pulse stripping voltammetry method(DPSV) was applied to the determination of three herbicides,ametryn,cyanatryn,and dimethametryn.It was found that their voltammograms overlapped strongly,and it is difficult to determine these compounds individually from their mixtures.With the aid of chemometrics,classical least squares(CLS),principal component regression(PCR) and partial least squares(PLS),voltammogram resolution and quantitative analysis of the synthetic mixtures of the three compounds were successfully performed.The proposed method was also applied to the analysis of some real samples with satisfactory results.     

Calorimetric evaluation of the interaction and absorption of eicosapentaenoic acid by biomembrane models

The interaction of eicosapentaenoic acid, a polyunsaturated fatty acid belonging to the omega-3 class, with biomembrane models represented by multilamellar or unilamellar vesicles made of dimyristoylphosphatidylcholine was monitored by means of differential scanning calorimetry technique. The calorimetric analysis of vesicle prepared in the presence of increasing molar fraction of eicosapentaenoic acid was carried out to show its maximum interaction with biomembrane models evaluating the effects of eicosapentaenoic acid on the biomembrane models thermotropic parameters (transition temperature and enthalpy variation). Furthermore, in order to detect the influence of the presence of hydrophilic or lipophilic media on the entity of the compound absorption by the biomembrane models, kinetic experiments were carried out.The results indicate that eicosapentaenoic acid strongly interacts with the biomembrane models depressing the transition temperature and the enthalpy variation. Eicosapentaenoic acid is absorbed by the biomembrane models and the absorption is affected by the used medium; in fact a bigger absorption happens in the presence of a lipophilic medium.     

Evaluation of the aerobic composting process of winery and distillery residues by thermal methods

The possibility of using thermal analysis for a quick characterization of chemical changes was tested in the organic matter from composting materials. Differential thermal analysis (DTA), thermogravimetry (TG) and the first derivative of the TG (DTG) were calculated in oxidizing conditions on compost samples obtained from three composting piles. The composting piles were made by mixing winery and distillery residues with sewage sludge (pile 1), with cow manure (pile 2) and hen droppings (pile 3). The temperature values in the pile 1 showed a different evolution during the thermophilic stage of the composting process in relation to the piles 2 and 3. The thermophilic stage for pile 1 was 17 days, meanwhile for the piles 2 and 3 were around 80 and 110 days, respectively, and probably pile 1 was not well composted. The curves of ion current of CO₂ have been recorded in order to shed light on changes occurring in organic matter during composting. Particularly DTG curves allowed us to distinguish between well (piles 2 and 3) and poor (pile 1) stabilized organic matter. The energy released was calculated for each sample by integrating the DTA curves and these results are agreed with the previous hypothesis. Information deriving from weight losses, registered by the TG and DTG curves, enables to follow the evolution state of the organic matter and therefore changes in its stability. These data could determine the final point of the composting process of winery and distillery residues and then reduce the time for compost harvest.     

The electrocatalytic examination of cephalosporins at carbon paste electrode modified with CoSalophen

The electrocatalytic oxidation of cephalexin and cefazolin has been studied at a carbon paste electrode modified with cobalt salophen (CoSal) by cyclic voltammetry. The selectivity of the carbon paste modified with CoSal in detecting cephalexin and cefazolin was examined. To suggest the electrocatalytic mechanism for electro-oxidation of cefazolin, the electrochemical behavior of ceftriaxone was investigated which has a thiol group out of the beta lactam ring. The electrocatalytic oxidation of these antibiotics is shown to be irreversible at the CoSal modified electrode. Scan rate dependence of cefazolin, which is a sulfur-containing compound, has been examined. The results indicated that the electrocatalytic oxidation of the compounds is diffusion controlled. The responses of the modified electrode were compared with those of unmodified electrode and it has shown that the modified electrode has better sensitivity than unmodified electrode to the detection of cefazolin. The overall number of electrons contributed to the oxidation of cefazolin is obtained 1 by chronoamperometry; the number of electron involved in the rate-determining step was 1. The results of differential pulse voltammetry (DPV) using the modified electrode with high sensitivity were applied for the determination of cefazolin in human synthetic serum samples. The linear range was obtained from 1 × 10⁻⁵ to 1 × 10⁻³ M for DPV determination of cefazolin in buffered solutions (pH 3.0).     

Electrochemical determination of dopamine and ascorbic acid at a novel gold nanoparticles distributed poly(4-aminothiophenol) modified electrode

A modified electrode is fabricated by embedding gold nanoparticles into a layer of electroactive polymer, poly(4-aminothiophenol) (PAT) on the surface of glassy carbon (GC) electrode. Cyclic voltammetry (CV) is performed to deposit PAT and concomitantly deposit Au nanoparticles. Field emission transmission electron microscopic image of the modified electrode, PAT-Au_nano-ME, indicates the presence of uniformly distributed Au nanoparticles having the sizes of 8-10 nm. Electrochemical behavior of the PAT-Au_nano-ME towards detection of ascorbic acid (AA) and dopamine (DA) is studied using CV. Electrocatalytic determination of DA in the presence of fixed concentration of AA and vice versa, are studied using differential pulse voltammetry (DPV). PAT-Au_nano-ME exhibits two well defined anodic peaks at the potential of 75 and 400 mV for the oxidation of AA and DA, respectively with a potential difference of 325 mV. Further, the simultaneous determination of AA and DA is studied by varying the concentration of AA and DA. PAT-Au_nano-ME exhibits selectivity and sensitivity for the simultaneous determination of AA and DA without fouling by the oxidation products of AA or DA. PAT and Au nanoparticles provide synergic influence on the accurate electrochemical determination of AA or DA from a mixture having any one of the component (AA or DA) in excess. The practical analytical utilities of the PAT-Au_nano-ME are demonstrated by the determination of DA and AA in dopamine hydrochloride injection and human blood serum samples.     

Determination of trace arsenic on hanging copper amalgam drop electrode

Hanging copper amalgam drop electrode has been applied for trace determination of arsenic by cathodic stripping analysis. Detection limit for As(III) as low as 0.33 nM (0.02 μg/L) at deposition time (240 s) could be obtained. For seven successive determinations of As(III) at concentration of 5 nM relative standard deviation was 2.5% (n = 7). Interferences from selected metals and surfactant substances were examined. Absence of copper ions in sample solution causes easier optimization and makes method less vulnerable on contamination. The developed method was validated by analysis of certified reference materials (CRMs) and applied to arsenic determinations in natural water samples.     

Crystallization of poly(N-methyldodecano-12-lactam) in blends with poly(styrene-stat-acrylic acid)

Crystallization behaviour of blends of poly(N-methyldodecano-12-lactam) (PMDL) with statistical copolymer poly(styrene-stat-acrylic acid) (PSAA) has been studied by the DSC and WAXD methods. The blend films prepared from dioxane solutions were crystallized at laboratory temperature for five days. Approximate crystallinities of as-prepared neat lower- PMDL 5 and higher-molecular weight PMDL 45 were 28% and 19%, respectively. With increasing PSAA content in the blends the crystallinities decreased sharply. The melting point of the primary crystalline structure of PMDL showed a decreasing dependence on PSAA content in the blends, confirming miscibility of the PMDL-PSAA pair. Recrystallization was strongly suppressed in the blends. The lower-melting endotherm appearing at about 10-15 °C above the crystallization temperature was attributed to melting to less perfect structures formed during secondary crystallization. In neat PMDL, the extent of secondary crystallization was approximately 5-10%. In the blends containing 20% PSAA approximate relative proportion of secondary crystallites on total crystallinity was 40% and 60% for the blends with PMDL 5 and PMDL 45, respectively. WAXD measurements did not reveal any change in crystal modification on blending. Increased T_g in blends of flexible PMDL cannot play a significant role in suppression of primary in favour of secondary crystallization. This was attributed to low mobility of PMDL chains due to dilution effect and specific interactions with the amorphous copolymer component, and, in case of the higher-molecular-weight PMDL, a greater involvement of entanglements. Higher T_g of blends was involved in retardation of non-isothermal crystallization on cooling and subsequent cold crystallization.     

Study of poly(bisphenol A carbonate) relaxation kinetics at the glass transition temperature

In this work, the variations of the relaxation times are investigated above and below the glass transition temperature of a model amorphous polymer, the polycarbonate. Three different techniques (calorimetric, dielectric and thermostimulated currents) are used to achieve this goal. The relaxation time at the glass transition temperature was determined at the temperature dependence convergence of the relaxation times calculated with dynamic dielectric spectroscopy (DDS) for the liquid state and thermostimulated depolarisation currents (TSDC) for the vitreous state. We find a value of τ(T_g) = 110 s for PC samples. The knowledge of the temperature dependence, τ(T), and the value τ(T_g) enables to determine the glass-forming liquid fragility index, m. We find m = 178 ± 5.     

Multiple melting behavior of poly(butylene succinate)

The multiple melting behavior of poly(butylenes succinate) (PBS) isothermally crystallized from the melt was investigated using differential scanning calorimetry (DSC), temperature modulated DSC (MDSC) and polarized optical microscopy. PBS exhibits at most four melting endotherms (denoted as T_m1, T_m2, T_m3, and T_m4 from high to low temperatures) and a crystallization exotherm (denoted as T_re) in the DSC heating trace. Multiple melting endotherms were observed even at high heating rates. The origins of each endothermal and exothermal peak were discussed in detail. It is suggested that: (i) the crystallization exothermic peak, T_re, relates to the recrystallization of the melt of the crystallites with lower thermal stability; (ii) the T_m1 is ascribed to the melting of crystallites formed through recrystallization; (iii) two crystal populations with different thermal stability are responsible for the T_m2 and T_m3; (iv) the T_m4, which is the annealing peak, represents the transition of the rigid amorphous fraction (RAF) from solid-like RAF into liquid-like amorphous fraction.