Sequential separation of Cu(II)/Ni(II)/Fe(II) from strong-acidic pickling wastewater with a two-stage process based on a bi-pyridine chelating resin

A self-synthesized bi-pyridine chelating resin (PAPY) could separate Cu(II)/Ni(II)/Fe(II) sequentially from strong-acidic pickling wastewater by a two-stage pH-adjusted process, in which Cu(II), Ni(II), and Fe(II) were successively preferred by PAPY. In the first stage (pH 1.0), the separation factor of Cu(II) over Ni(II) reached 61.43 in Cu(II)-Ni(II)-Fe(II) systems. In the second stage (pH 2.0), the separation factor of Ni(II) over Fe(II) reached 92.82 in Ni(II)-Fe(II) systems. Emphasis was placed on the selective separation of Cu(II) and Ni(II) in the first-stage. The adsorption amounts of Cu(II) onto PAPY were 1.2 mmol/g in the first stage, while those of Ni(II) and Fe(II) were lower than 0.3 mmol/g. Cu(II) adsorption was hardly affected by Ni(II) with the presence of dense Fe(II), but Cu(II) inhibited Ni(II) adsorption strongly. Part of preloaded Ni(II) could be replaced by Cu(II) based on the replacement effect. Compared with the absence of Fe(II), dense Fe(II) could obviously enhance the separation of Cu(II)-Ni(II). More than 95.0% of Cu(II) could be removed in the former 240 BV (BV for bed volume of the adsorbent) in the fixed-bed adsorption column process with the flow rate of 2.5 BV/h. As proved by X-ray photoelectron spectrometry (XPS) and density functional theory (DFT) analyses, Cu(II) exerted a much stronger deprotonation and chelation ability toward PAPY than Ni(II) and Fe(II). Thus, the work shows a great potential in the separation and purification of heavy metal resources from strong-acidic pickling wastewaters.     

Cooperative spectrum sharing MIMO systems with successive decoding

A spectrum sharing system with primary and secondary nodes, each equipped with an arbitrary number of antennas, is investigated. Particularly, the outage performance of an underlay cognitive system is analytically studied, in the case when the end-to-end ($e2e$) communication is established via an intermediate relay node. To better enhance the $e2e$ communication, successive interference cancellation (SIC) is adopted, which compensates for both the transmission power constraint and the presence of interference from primary nodes. Both the relay and secondary receiver perform unordered SIC to successively decode the multiple streams, whereas the decode-and-forward relaying protocol is used for the $e2e$ communication. New closed-form expressions for the $e2e$ outage performance of each transmitted stream are derived in terms of finite sum series of the Tricomi confluent hypergeometric function. In addition, simplified yet tight approximations for the asymptotic outage performance are obtained. Useful engineering insights are manifested, such as the diversity order of the considered system and the impact of interference from the primary nodes in conjunction with the constrained transmission power of the secondary nodes.     

试飞数据分析结果的可视化输出软件设计与实现

针对试飞数据分析结果进行可视化输出可以提高试飞科目的评判效率。将试飞数据分析结果进行结构化存储,采用列模式内存对齐方式,提高单个参数的检索查询及图形输出操作效率;对C+ builder标准组件类属性及方法进行扩充,实现对常规和特殊定制结果曲线图的绘制导出;利用进程调用方式,融合Matlab平台GUI应用程序和算法库,扩展软件交互功能。以实现对试飞数据分析结果的可视化输出。     

Photo‐excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High‐Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4‐di(2‐thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record‐high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo‐involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo‐energy utilization in rechargeable batteries.     

低泵浦功率的遥泵放大在超长跨距密集波分复用系统中的应用

针对长跨距密集波分复用系统中喇曼放大入纤泵浦功率过大的问题,将遥泵放大器（RP-EDFA）引入到系统中,通过对共纤RP-EDFA的噪音性能及其优化设计的研究,在理论上计算比较了RP-EDFA系统和后向喇曼放大系统在不同泵浦功率水平下的光信噪比和非线性相移,表明遥泵放大技术有效降低了入纤泵浦的功率水平,更适合长跨距应用.运用遥泵放大技术,对一个典型的长跨距系统进行系统Q值的模拟,结果表明：在 220 mW泵浦功率水平下可以实现跨距为 167 km的40×11.6 Gbit/s系统1000 km传输,Q值裕量4.4 dB.     

Eu:Lu2O3透明闪烁陶瓷的制备与性能

采用湿化学法合成了Eu原子掺量5%的Lu₂O₃陶瓷前驱体,通过SEM、XRD研究了煅烧前后前驱体和1 100 ℃煅烧4 h后粉体的形貌、结构以及物相。结果表明煅烧后的粉体为纳米类球形、高分散且结晶性良好的颗粒。颗粒尺寸为68.5 nm。使用煅烧后的粉体为原料,在1 650 ℃真空烧结30 h制备了高透过率的Eu:Lu₂O₃陶瓷,晶粒尺寸为46 μm,在611 nm处的直线透过率可以达到66.3%。此外对陶瓷的吸收曲线、光致激发和发射光谱特性以及X射线激发发射光谱进行研究。可观察到,Eu:Lu₂O₃陶瓷存在基质和激活离子两类吸收,光致发光光谱和X射线激发发射光谱均可以看出Eu:Lu₂O₃陶瓷存在极强的⁵D₀→⁷F₂跃迁发光,位于611 nm处。对比商业的BGO单晶的X射线发射光谱,可得本实验中制备的陶瓷的光输出为85 000 ph/MeV。Eu:Lu₂O₃陶瓷本身有着高X射线以及高能粒子的阻止能力,结合高光输出特性,表明Eu:Lu₂O₃陶瓷在X射线成像等领域具有巨大的潜在应用价值。     

基于离轴积分腔输出光谱的燃烧场CO浓度测量研究

CO是碳氢燃料不完全燃烧的重要产物,常常被作为反应燃烧效率的标志物,燃烧场CO组分浓度的精确测量对提高燃烧效率、减少污染物排放具有重要意义。离轴积分腔输出光谱(OA-ICOS)是一种利用物质对激光的特异性吸收,实现对该物质分析和测量的技术,具有非接触、稳定和高灵敏度等优点。针对燃烧场CO浓度低,背景信号干扰强等特点,采用分布反馈式(DFB)激光器搭建基于离轴积分腔输出光谱的CO浓度测量系统,通过直接吸收光谱的测量方法实现对高温燃烧场CO浓度测量。利用仿真模拟的方法,在所用激光器中心波长的附近选出了常温下谱线强度较为突出,高温下不受其他燃烧产物干扰的第一泛频带R(10)吸收谱线。通过固定光程池对比吸光度的方法标定了OA-ICOS系统的有效光程;通过比较不同扫描频率下吸收谱线的信噪比和线型拟合残差标准差,得到最佳波长扫描频率;通过测量不同浓度CO混合气体的吸收信号分析了系统误差。探究了不同燃烧情况下CH₄/Air预混平焰炉上CO的产生情况,根据燃烧场测量区域温度分布情况描述了温度分布不确定度对CO测量结果的影响。当量比为1.0时,在10 ms的测量时间分辨率下,噪声等...     

Closed-System Solution of the 1D Atom from Collision Model

Obtaining the total wavefunction evolution of interacting quantum systems provides access to important properties, such as entanglement, shedding light on fundamental aspects, e.g., quantum energetics and thermodynamics, and guiding towards possible application in the fields of quantum computation and communication. We consider a two-level atom (qubit) coupled to the continuum of travelling modes of a field confined in a one-dimensional chiral waveguide. Originally, we treated the light-matter ensemble as a closed, isolated system. We solve its dynamics using a collision model where individual temporal modes of the field locally interact with the qubit in a sequential fashion. This approach allows us to obtain the total wavefunction of the qubit-field system, at any time, when the field starts in a coherent or a single-photon state. Our method is general and can be applied to other initial field states.     

投入产出系统的完全需要系数矩阵的简化计算方法

对大型投入产出系统进行经济结构分析，需要考虑对投入产出系统的分解，由最终产品确定总产品，需要计算完全需要系数矩阵（I－A）^-1。由于投入产出系统的分析和计算的工作量主要集中于（I－A）^-1，本文给出了矩阵（I－A）^-1的简化计算方法，它具有非常的实际意义。     

PbWO_4晶体的光输出与能量分辨研究

研究了多种包装材料和包装工艺对钨酸铅(PbWO4)晶体光输出和能量分辨的影响,测量结果与基于GEANT4的模拟结果符合很好,并由此确定了晶体的最佳包装方法。