An estimation of the measurement uncertainty for an optical emission spectrometric method

 A validation procedure based on the ISO/IEC 17025 standard was used to demonstrate the long-term stability of a calibration process and to assess the measurement uncertainty of a standard test method for optical emission vacuum spectrometric analysis of carbon and low-alloy steel (ASTM E 415–99a). The validation was used to provide documented evidence that the selected method fulfils the requirements and that the method is ”fit for purpose”. A test for drift was applied to determine statistically whether the analytical results vary systematically with time. The accuracy and traceability of the optimised method were tested by an analysis of closely matched matrix certified reference materials (CRMs). The measurement uncertainty estimations took account of the precision study, the bias and its uncertainty, and the qualification of uncertainties not considered in the overall performance studies. Received: 2 November 2002 Accepted: 2 January 2003 Acknowledgement The author expresses gratitude to Dr. Aleš Fajgelj for helpful discussions during the 3rd Central European Conference on Reference Materials and Measurements. Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to T. Drglin     

Measurement uncertainty of selenium determination in the reference material Seronorm Trace Elements Serum by hydride generation atomic fluorescence spectrometry

 An analytical result is not considered to be complete without a statement of the measurement uncertainty associated with it. Evaluation of measurement uncertainty is therefore an essential part of every determination. In the present study the measurement uncertainty of the result of determination of selenium in the reference material Seronorm Trace Elements Serum was studied. The combination of a digestion procedure using sulfuric acid, V₂O₅ in H₂SO₄ and hydrogen peroxide and the continuous flow approach of hydride generation atomic fluorescence spectrometry (HG-AFS) detection was used for selenium determination. The total uncertainty budget was calculated with the help of the GUM Workbench program, in which computations follow the rules of the ’ISO guide to the expression of uncertainty in measurement’. The major sources of uncertainty were found to be due to the recovery of the procedure, measurement of peak heights and the purity of Na₂SeO₃. A selenium mass fraction of 77.1±4.8 ng/g (with a coverage factor of 2.1, 95% probability) was determined, which is comparable with the recommended value of 80 ng/g. Received: 13 September 2002 Accepted: 23 December 2002 Acknowledgements We would like to thank Tinkara Buˇcar, B.Sc. for useful discussions and the IAEA Vienna, for financial support of the project 11553/RO. Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to V. Stibilj     

Rough隶属函数关于集合并与交的一种高精度计算方法

近些年来，许多处理近似问题的方法陆续被提出，其中利用Rough集理论计算两个集合的并和交的Rough隶属函数方法是被用较多的一种方法，但毕竟该方法精度较差。为此，介绍了一种精度较高的计算两个集合的并和交的Rough隶属函数方法，它克服了前者利用Rough集理论计算Rough隶属函数的复杂性，而迎来了简单和高精度的特点。     

Classical Limit of Expectation Values in a Wave Packet Involving Few Stationary States

Expectation values of physical quantities in a wave packet involving few stationary states in an infinite square well are calculated. Explicit results show that the expectation values in the classical limit go over to the corresponding classical quantity in the form of the arithmetic mean (in mathematical term, the Fejér's average) of the partial Fourier series converging to the classical quantity. The number of the stationary states is that of the partial Fourer series in the Fejér's average. The quantum uncertainty is then demonstrated to have a classical counterpart.     

一种基于闭环优化的新型鲁棒预测控制方法

针对带约束的凸多面体线性不确定模型，提出了一种新型鲁棒预测控制方法，它采用离散化的不确定模型构造最小－最大优化控制问题，并在其中直接引入状态反馈机制，与其他最小－最大预测控制方法相比，这种方法等效于增加了控制序列的长度，为优化问题增加了更多的自由度，从而扩大了可行域，作为最小化目标的是离散化不确定系统在整个预测时域上二次型成本函数的最大值，而不是各预测阶段应成本项的上界之和，从而减少了与最小－最大优化相关的方程个数，有利于降低计算复杂性，文中进一步证明了不确定系统的闭环稳定性取决于优化问题在初始时刻的可行性，并将优化问题转化为线性矩阵不等式形式。最后，以数值仿赵例子验证了方法的有效性。     

第Ⅰ种强度不对称三态叠加多模叠加态光场N次方Y压缩—第一正交相位分量的压缩情况

根据量子力学中的线性叠加原理,构造了由三个强度不等的多模相干态光场|{Z_j^(A)}>_q、|{Z_j^(B)}>_q和|{Z_j^(C)}>_q的线性叠加所组成的第Ⅰ种强度不对称三态叠加多模叠加态光场|ψ_l^(ABC)>_q.利用多模压缩态理论,研究了态|ψ_l^(ABC)>_q的第一正交方分量(即磁场分量)的广义非线性等幂次N次方Y压缩特性.结果发现:①在上述各多模相干态光场中各模的强度和各模的初始相位各不相等的情况下,态|ψ_l^(ABC)>_q的第一正交分量-磁场分量在一定的条件下,总可呈现出周期性变化的、任意等幂次的N次方Y压缩效应;②当上述各多模相干态光场的强度和各模的初始相位相等时,态|ψ_l^(ABC)>_q的磁场分量的N次方Y压缩现象消失,态|ψ_l^(ABC)>_q可恒处于等幂次N-Y最小测不准态.     

An Interval-Parameter Fuzzy Approach for Multiobjective Linear Programming Under Uncertainty

An interval-parameter fuzzy linear programming method (IFMOLP) is proposed in this study for multiple objective decision-making under uncertainty. As a hybrid of interval-parameter and fuzzy methodologies, the IFMOLP incorporates interval-parameter linear programming and fuzzy multiobjective programming approaches to form an integrated optimization system. The method inherits advantages of interval-parameter programming, and allows uncertainties and decision-makers’ aspirations to be effectively communicated into its programming processes and resulting solutions. Membership functions for both objectives and constraints are formulated to reflect uncertainties in different system components and their interrelationships. An interactive solution procedure has been developed based on solution approaches of the interval-parameter and fuzzy programming techniques, plus necessary measures for handling the multiobjective feature. A didactic example is provided in the paper to illustrate the detailed solution process. Possibilities of further improvements by seeking Pareto optimum and incorporating flexible preference within constraints are also discussed.     

土壤中总汞测量不确定度的评定

依据JJF1059-1999,对GB/T17136-1997冷原子吸收分光光度法测定土壤中总汞含量进行了不确定度评定。建立了数学模型,对各不确定度分量进行分析和量化。计算出土壤中总汞含量测量结果的相对合成标准不确定度为0.0215,扩展不确定度为0.163mg/kg。在土壤总汞含量测量过程中,求试液中汞含量贡献的不确定度最大。     

Adaptive approach for nonlinear sensitivity analysis of reaction kinetics

We present a unified approach for linear and nonlinear sensitivity analysis for models of reaction kinetics that are stated in terms of systems of ordinary differential equations (ODEs). The approach is based on the reformulation of the ODE problem as a density transport problem described by a Fokker-Planck equation. The resulting multidimensional partial differential equation is herein solved by extending the TRAIL algorithm originally introduced by Horenko and Weiser in the context of molecular dynamics (J. Comp. Chem. 2003, 24, 1921) and discussed it in comparison with Monte Carlo techniques. The extended TRAIL approach is fully adaptive and easily allows to study the influence of nonlinear dynamical effects. We illustrate the scheme in application to an enzyme-substrate model problem for sensitivity analysis w.r.t. to initial concentrations and parameter values.     

粘度国家基准装置测量结果的不确定度

分析粘度国家基准装置测量结果不确定度的来源并进行评定。影响粘度国家基准装置测量不确定度的主要因素有温度、时间、表面张力、空气浮力以及动能修正等。根据2002年粘度国家基准量值复测的结果，以及改造后新基准装置和辅助设备的状态，计算得粘度国家基准装测量结果的扩展不确定度为0.038%-0.4%。