Local structure analysis of smoky and colorless topaz using single crystal Al NMR

The angular dependence of the ²⁷Al NMR spectrum was measured for single crystals of smoky and colorless topaz, Al₂SiO₄(F,OH)₂. Smoky topaz was obtained by irradiating high energy neutrons to colorless topaz. The quadrupole coupling constant e²Qq/h and the asymmetry parameter η were obtained from the analysis of the angular dependences of quadrupole splitting of the ²⁷Al NMR spectrum. The local structures around the aluminum atoms in smoky and colorless topaz were discussed from the magnitude and the direction of the electric field gradient. The directions of principal axes of the EFG tensor of ²⁷Al were close to the directions of Al-O and Al-F bonds. The difference in the bond lengths between Al(1)-F(1) and Al(1)-F(2) was found to affect the x and y components of the EFG tensor.     

Mossbauer, infrared and magnetic susceptibility studies of iron sodium borate glasses doped by sulphur

The affect of sulphur on the structural properties of iron sodium diborate glasses having the composition {(100−x)Na₂B₄O₇+xFe₂O₃}+yS, where x=0.05, 0.15 and 0.25 mol% and Y=0, 2.5 and 5 wt% was studied by infrared, Mossbauer spectroscopy and magnetic susceptibility measurements. It was found that, for samples having 5 mol% Fe₂O₃ and free from sulphur, the iron ions are present in both Fe²⁺ and Fe³⁺ states and also 92% of the total iron enters the glass network as a glass former. The ratio of Fe³⁺/Fe²⁺ increases with increasing the iron content for sulphur-free samples and others containing sulphur. This ratio also decreases with increasing the sulphur content. The magnetic susceptibility was found to decrease with increasing the sulphur content. Also, the increase of Fe₂O₃ content led to a less symmetrical environment of Fe³⁺ ions and vice versa for the Fe²⁺ environment.     

盐酸托哌酮的NMR研究

应用1D NMR和脉冲梯度场2D NMR技术深入研究盐酸托哌酮的溶液结构,对其¹H和¹³C NMR化学位移进行全归属,并讨论其立体化学.     

General solutions of plane elasticity of one-dimensional orthorhombic quasicrystals with piezoelectric effect

By introducing four potential functions, the governing equations of plane problems in 1D orthorhombic quasicrystals with piezoelectric effect are composed of four second-order partial differential equations, in which the quasi-harmonic functions are the essential unknowns. The general solution of these equations is further established, and all expressions are expressed in terms of the potential functions. As an application of the general solution, the closed-form solutions are obtained for wedge problems or half-plane problems of 1D orthorhombic piezoelectric quasicrystals.     

Evaluation of aortic stenosis severity using 4D flow jet shear layer detection for the measurement of valve effective orifice area

Aims

The objective of this study was to evaluate the potential of 4D flow MRI to assess valve effective orifice area (EOA) in patients with aortic stenosis as determined by the jet shear layer detection (JSLD) method.

Methods and Results

An in-vitro stenosis phantom was used for validation and in-vivo imaging was performed in 10 healthy controls and 40 patients with aortic stenosis. EOA was calculated by the JSLD method using standard 2D phase contrast MRI (PC-MRI) and 4D flow MRI measurements (EOA_JSLD-2D and EOA_JSLD-4D, respectively). As a reference standard, the continuity equation was used to calculate EOA (EOA_CE) with the 2D PC-MRI velocity field and compared to the EOA_JSLD measurements. The in-vitro results exhibited excellent agreement between flow theory (EOA = 0.78 cm²) and experimental measurement (EOA_JSLD-4D = 0.78 ± 0.01 cm²) for peak velocities ranging from 0.9 to 3.7 m/s. In-vivo results showed good correlation and agreement between EOA_JSLD-2D and EOA_CE (r = 0.91, p < 0.001; bias: − 0.01 ± 0.38 cm²; agreement limits: 0.75 to − 0.77 cm²), and between EOA_JSLD-4D and EOA_CE (r = 0.95, p < 0.001; bias: − 0.09 ± 0.26 cm²; limits: 0.43 to − 0.62 cm²).

Conclusion

This study demonstrates the feasibility of measuring EOA_JSLD using 4D flow MRI. The technique allows for optimization of the EOA measurement position by visualizing the 3D vena contracta, and avoids potential sources of EOA_CE measurement variability.     

Electronic structure of BaTiO3 using resonant X-ray emission spectroscopy at the Ba-L3 and Ti-K absorption edges

We have studied the electronic properties of the ferroelectric barium titanate BaTiO₃ using two complementary bulk-sensitive spectroscopic probes, resonant X-ray emission spectroscopy (RXES) and X-ray absorption spectroscopy in the partial fluorescence mode (PFY-XAS) at the Ba-L₃ and Ti-K absorption edges. Contrary to a previous study, we found no fine structure in the pre-edge area of the PFY-XAS spectrum at the Ba-L₃ edge, and no temperature-induced spectral change was observed between room temperature and 150 °C. This result is not supportive of the possible presence of the displacement around Ba²⁺ at the Curie temperature. RXES spectra were measured at the Ti-K edge for BaTiO₃, along with SrTiO₃ and La-doped metallic SrTiO₃. The photon energy of the emission peak is found to be nearly constant throughout the absorption edge for all three compounds. We deduce the Ti 3d states to have a delocalized character, in contrast with the Ba 5d states, a property which is consistent with the proposed scenario of the formation of electric dipoles in BaTiO₃.     

小鼠卵母细胞染色体三维双光子荧光图像的轴向衰减

双光子荧光显微镜作为一种高分辨光学仪器,已经被广泛应用于生物样品的非侵入式三维光学成像中。相比共聚焦显微镜,双光子荧光显微镜拥有更深的探测深度。然而,即便如此,在对较厚的生物样品进行非侵入式光学三维成像时,样品的成像质量也往往会随着探测深度的增加而下降。在临床和生物学领域对研究母性遗传起重要作用的小鼠卵母细胞拥有较大的直径(80～100 μm),吸收和散射效应较为明显。本文研究小鼠卵母细胞染色体的三维双光子荧光图像随探测深度增加图像质量的衰减程度。通过对所得图像进行轴向衰减矫正,利用体积作为参数,将矫正前后小鼠卵母细胞内染色体三维双光子荧光图像进行对比。结果表明,由于吸收和散射效应,卵母细胞存在较严重的光学轴向衰减问题,因此,对用双光子荧光三维成像手段获得的小鼠卵母细胞图像进行衰减矫正是有必要的。这为进一步精确定量的研究卵母细胞内染色体的三维构像打下良好的基础。     

基于三维成像技术的四轮定位参数建模方法

鉴于现有四轮定位仪参数求取方法误差大、参数项目少、对测量环境要求高等不足,提出了一种基于三维成像技术的四轮定位参数建模方法;该方法通过双摄像机对目标板拍摄获得的图像信息,应用空间向量方法,求取车体运动状态下的轮轴信息,动态建立四轮定位参数测量模型,解决测量平面的动态建立、测量平台的补偿等问题;经过零标定平台测试,当车轮旋转在18~22°时,定位参数求取方法正确有效,通过实车对比测量验证,平均误差小于0.07°。     

提高生物大分子NMR分辨率和灵敏度的有效方法：TROSY和CRINEPT

随着NMR谱仪和实验技术的发展,以及²H、¹⁵N、¹³C标记技术的发展和完善,先后出现了多种异核多维和多共振脉冲实验方法,测定分子量不大于30 kDa的蛋白质的溶液三维结构不再是困难的事. 但是,对于分子量大于30 kDa的蛋白质,由于共振峰数目的增多和谱线增宽,其结构测定依然很困难. 虽然提高磁场强度能够提高分辨率和灵敏度,但是,800 MHz以上的NMR谱仪造价昂贵,难以普及,促使NMR工作者不断寻求能够提高分辨率和灵敏度的新的脉冲实验方法. 到目前为止,比较成功的方法是TROSY^[1]和CRINEPT^[2], 以及在此基础上发展的新方法. 文中对TROSY和CRINEPT的基本原理、最新发展,以及它们在蛋白质结构测定和分子间相互作用研究等方面的广泛应用做了综述. 