The characteristics analysis of a new-style four-mirror axisymmetric-fold-combination cavity adapting to cylindrical discharge region

An axisymmetric-fold-combination (ASFC) cavity composed of two planar mirrors and spherical mirrors was designed. It is a stable-unstable resonator cavity. The light field of radial direction is Gaussian distribution. And in angular orientation, the distribution keeps invariant. It could generate annular CO₂ laser beam with excellent spatial coherence. And the spatial coherence is commendably realized with its stable-unstable cavity structure. The output light intensity distribution of this special model was discussed and simulated. With exterior lenses group, the output beams can be adjusted and controlled better to meet the manufactural requirements. Some references were provided for further research of the cavity with cylindrical discharge region.     

Transparent water repellent silica films by sol-gel process

Non-wettable surfaces with high contact angles and facile sliding angle of water droplets have received tremendous attention in recent years. The present paper describes the room temperature (∼27 °C) synthesis of dip coated water repellent silica coatings on glass substrates using iso-butyltrimethoxysilane (iso-BTMS) as a co-precursor. Emphasis is given to the influence of the hydrophobic reagent (iso-BTMS) on the water repellent properties of the silica films. Silica sol was prepared by keeping the molar ratio of tetraethoxysilane (TEOS) precursor, methanol (MeOH) solvent, water (H₂O) constant at 1:16.53:8.26 respectively, with 0.01 M NH₄F throughout the experiment and the molar ratio of iso-BTMS/TEOS (M) was varied from 0 to 0.965. The effect of M on the surface structure and hydrophobicity has been researched. The static water contact angle values of the silica films increased from 65° to 140° and water sliding angle values decreased from 42° to 16° with an increase in the M value from 0 to 0.965. The water repellent silica films are thermally stable up to a temperature of 280 °C and above this temperature the film shows hydrophilic behavior. The water repellent silica films were characterized by the Fourier Transform Infrared (FT-IR) Spectroscopy, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), % of optical transmission, thermal and chemical aging tests, humidity tests, static and dynamic water contact angle measurements.     

模具钢表面激光毛化工艺的试验研究

以模具工业45^#钢摩擦学设计及性能要求为基础,分析了激光毛化模具钢表面形貌的形成机理及其关键的影响因素。采用灯泵浦Nd：YAG脉冲激光器在试样表面进行激光毛化工艺试验,获得了合理的激光毛化参数范围：激光峰值功率0．8～1．6kW,离焦量-1．4～-0．4mm、＋0．4～4-1．4mm,辅助气体压力〉0．2MPa,脉宽1．8ms。采用功率增益和氧气保护,可加工出预先设定的微火山口状毛化形貌。微凹坑形貌的成功获得对于提高拉伸模具的摩擦磨损性能,进一步掌握激光毛化参数与材料的作用规律,提供了有效的数据参考。     

Limit theorems in financial market models

Invariance principle states that a scaled simple random walk converges to the standard Brownian motion.In this article, we present a discrete time stochastic process, which reflects a microstructure of market dynamics, and prove a convergence to a scaling limit process with a drift term and a jump term. These terms are derived from a macroscopic condition on volumes traded in some time intervals. The mathematical tools for obtaining our results are Dobrushin-Hryniv theory and the method of cluster expansion developed in mathematical studies of statistical mechanics.     

紫细菌捕光天线LH2中的超快光物理研究

采用飞秒泵浦探测技术研究了紫细菌外周捕光天线LH2中的超快光动力学过程.从B800蓝侧的激发态动力学中观察到B800到B850的能量传递时间,实验结果与理论计算结果的差别说明激发B800时可能引起B850上激子带的直接激发,或存在由B800到B850上激子态的能量传递通道.在B800红侧激发的动力学过程中,漂白信号前端存在的一个快速光吸收信号主要来源于B850上激子带的直接激发.在天然RS601和突变体GM309的LH2中,800 nm激发时的动力学过程都表现为一个类似的光漂白过程,动力学曲线的衰减时间常量在天然LH2中明显快于突变体中,说明在GM309中B800到B850的激发能传递速率有所降低.而在845 nm激发下两个样品中的快过程类似,但慢过程在GM309中有所增快,激发态中的能量重新分布包括逆向的能量传递也受到类胡萝卜素微结构的影响.     

Planar Line Processes for Void and Density Statistics in Thin Stochastic Fibre Networks

Using results for the distribution of perimeters of random polygons arising from random lines in a plane, we obtain new analytic approximations to the distributions of areas and local line densities for random polygons and compute various limiting properties of random polygons. Using simulation, we show that the lengths of adjacent sides of polygons generated by random line processes in the plane are correlated with ρ=0.616±0.001.     

Monitoring of Paint Drying Process by Digital Speckle Correlation

The state of drying paint is monitored from the dynamic behaviors of the speckle pattern arising from laser illumination of the region inspected. Temporal variation of the peak height of the cross-correlation function between successive frames taken with a fixed interval is plotted until the peak maintains a stationary maximum value. We used a speckle pattern in the diffraction field for monitoring of a single region and that in the image field for simultaneous monitoring of various regions. Both the normal and the phase-only algorithms were compared for cross-correlation computation. The former showed more distinct variation of peak height.     

Calculation of the photoelectron spectra under the scaling transform

By solving time-dependent Schrödinger equation, the dependence of photoelectron energy spectra on the binding energy of targets, wavelength and intensity of laser pulse is exhibited and a scaling law of kinetic energy spectra of both the direct and the rescattered photoelectrons is concluded. The scaling law provides a convenient tool to determine the equivalent photoionization process of various atoms or molecules in various laser fields. The verification of the scaling law by independent methods provides an incontestable support to the validity of the scaling law.     

Modelling non-equilibrium self-assembly from dissipation

Non-equilibrium self-assembly is ubiquitous in physico-chemical and biological systems, and manifests itself at different scales, ranging from the molecular to the cosmological. The formation of microtubules, gels, cells and living beings among many others takes place through self-assembly under nonequilibrium conditions. We propose a general thermodynamic non-equilibrium model to understand the formation of assembled structures such as gels and Liesegang patterns and at the same time able to describe the kinetics and the energetics of the structure formation process. The model is supported for a global mechanism to obtain self-assembled structures from building blocks via activation, deactivation, assembly, and disassembly processes. It is proposed that the resulting structures can be characterised by a structural parameter. Our model may contribute to a better understanding of non-equilibrium self-assembly processes and give deeper insight as to how to obtain a specific structural architecture to materials, such as hydrogels which are of great importance in the design of advanced devices and novel materials.     

表面光学声子对柱形量子线中三次谐波振荡的影响

本文利用密度矩阵方法研究了表面光学声子对柱形量子线中三次谐波振荡的影响,并且导出了三次谐波振荡的表达式。然后,以GaAs柱形量子线为例作了数值计算。研究表明,当柱形量子线的横向半径d非常小时,电子和表面光学声子之间的耦合强度就非常大,表面光学声子对三次谐波振荡的影响就更强。