Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

Spectral stability of the Coulomb-Dirac Hamiltonian with anomalous magnetic moment

We show that the point spectrum of the standard Coulomb-Dirac operator H₀ is the limit of the point spectrum of the Dirac operator with anomalous magnetic moment H_a as the anomaly parameter tends to 0. For negative angular momentum quantum number κ, this holds for all Coulomb coupling constants c for which H₀ has a distinguished self-adjoint realisation. For positive κ, however, there are some exceptional values for c, and in general an index shift between the eigenvalues of H₀ and the limits of eigenvalues of H_a appears, accompanied with additional oscillations of the eigenfunctions of H_a very close to the origin.     

旋转带电体磁矩计算的若干法则与算例

本文在文献 [1]、[2 ]等的基础上给出关于旋转带电体的磁矩计算的若干法则 ,均以定理形式表达 ,并列表枚举其相关算例     

Discrete Sturm–Liouville problems, Jacobi matrices and Lagrange interpolation series

The close relationship between discrete Sturm–Liouville problems belonging to the so-called limit-circle case, the indeterminate Hamburger moment problem and the search of self-adjoint extensions of the associated semi-infinite Jacobi matrix is well known. In this paper, all these important topics are also related with associated sampling expansions involving analytic Lagrange-type interpolation series.     

定轴转动带电体的远区磁场分布

类比定轴转动刚体转动惯量以及电偶极子电场的计算方法，得出定轴转动带电体的磁矩及其远区磁场分布。     

机械结构因素对光电跟踪伺服系统性能的影响

为克服机械结构因素对光电跟踪伺服系统性能的不良影响,分析了转动惯量、结构谐振频率、摩擦力矩等伺服机械结构因素与伺服系统性能的关系,包括分析转动惯量与伺服系统性能的关系、结构谐振频率与伺服系统性能的关系、摩擦力矩与伺服系统性能的关系,探讨了消除或减小机械谐振的措施.该分析方法可应用于设计和制造响应速度快、跟踪精度高的光电跟踪伺服系统.     

N[a,b]类中边界Nevanlinna-Pick插值(I)

用所谓的Hankel向量方法求解N[a,b]函数类中带边界插值数据的Nevanlina-Pick插值(BNP(N[a,b]))问题,并建立BNP(N[a,b])问题与[a,b]上的某种带约束条件的Hausdorff矩量问题之间等价的可解条件以及解之间明确的一一对应关系.这使得当BNP(N[a,b])问题有多解时,能通过带约束条件的矩量问题的可解性准则和解获得BNP(N[a,b])问题的可解性准则和解的参数化描述,而在唯一解的情况下,通过BNP(N[a,b])问题解的存在唯一性准则和唯一解来获得带约束条件的     

AN ESTIMATE ON THE DISTRIBUTION AND MOMENTS OF THE LAST EXIT TIME OF AN ELLIPTIC DIFFUSION PROCESS

Let LB be the last exit time from a compact set B of an elliptic diffusion process X. A moderate estimate for the distribution of LB is obtained, and the sufficient and necessary condition for Ex(LBk)<∞is proved.     

A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

平面研磨中影响工件起动力矩的因素

本文针对平面研磨过程中工件运动的随机性，从理论上求出了在机床起动瞬间磨具作用于工件上的合力矩；探讨了影响这个力矩的主要因素，偏心距和工件几何尺寸的作用规律；为选择研磨参数提供一理论依据。