Measurement of the optical transmission modes and losses of the poled guest–host polymer NAEC/PEK-c planar waveguides

The polyetherketone (PEK-c) guest–host polymer planar waveguides doped with (4′-nitro)-3-azo-9-ethyl-carbazole (NAEC) were prepared. The waveguide films were poled by corona-onset poling at elevated temperature (COPET), and the corona poling setup includes a grid voltage making the surface-charge distribution uniform. By using the prism-in coupling method, the dark-line spectrum given by the reflected intensity versus the angle of incidence have been obtained, and the optical transmission losses of mth modes have been measured for the poled polymer waveguides at λ=632.8 nm. The measurement result showed that the optical loss of the fundamental mode is less than 0.7 dB cm⁻¹ for the TE polarization.     

Routing of 2-D switching networks by their embedding into cubes

The proposed all-optical 2-D switching networks are (i) M×N-gon prism switches (M2, N3) and (ii) 3-D grids of any geometry N3. For the routing we assume (1) the projection of the spatial architectures onto plane graphs (2) the embedding of the latter guest graphs into (in)complete host hypercubes (N=4) and generally, into N-cube networks (N3) and (3) routing by means of the cube algorithms of the host. By the embedding mainly faulty cubes (synonyms: injured cubes, incomplete cubes) arise which complicate the routing and analysis. The application of N-cube networks (i) extend the hypercube principles to any N3 (ii) increase the number of plane host graphs and (iii) reduce the incompleteness of the host cubes. Several different embeddings of the intersection graphs (IGs) of 2-D switching networks and several different routings are explained for N=4 and 6 by various examples. By the expansion of the grids (enlargement) internal waveguides (WGs) and internal switches are introduced which interact with the switches of the original 3-D grid without increasing the number of stages (NS). The embeddings by expansion apply to interconnection networks whereas dilation-2 embeddings (dilation ≡ distance of the nearest-neighbour nodes of the guest graph at the host) are rather suitable for the emulation of algorithms. Concepts for fault-tolerant routing and algorithm mapping are briefly explained.     

矩形介质光波导的条形传递函数方法

将条形传递函数方法引入矩形介质光波导传播特性的分析计算,从标量波动方程的变分表达式出发,推导和建立了条形传递函数方法的基本方程和两种应用模型,作为算例,给出了阶跃型折射率分布矩形介质光波导的数值计算结果,并与其它方法进行了比较,表明了此方法的精度及对光波导问题的适用性。     

棱镜-漏波导耦合器的理论分析

根据多光束干涉原理,理论上分析了棱镜-漏波导耦合器,且与棱镜-波导耦合器作了比较,给出正确使用这两种耦合器的判据.分析结果表明,在强耦合条件下,棱镜-漏波导耦合器可用于薄膜参数测量和光波导输入-输出耦合;对于弱耦合,本文的结果与Tien和Ulrich的理论一致.     

Conductance and Statistical Properties of Chaotic and Integrable Electron Waveguides

We show that the S-matrix for electrons propagating in a waveguide has different statistical properties depending on whether the waveguide cavity shape gives rise to chaotic or integrable behavior classically. We obtain distributions of energy level spacings for integrable and chaotic billiards shaped like the waveguide cavity. We also obtain distributions for Wigner delay times and resonance widths for the waveguide, for integrable and chaotic cavity geometries. Our results, obtained by direct numerical calculation of the electron wave function, are consistent with the predictions of random matrix theory.     

Investigation of Waveguide Y-Junction Circulator with a Triangular Ferrite Post

An H-plane waveguide Y-junction circulator with a triangular ferrite post is investigated by a modified analysis of jointly resonance theory and simple field theory. Good agreement between the theoretical obtained performances and experimental results is observed. The circulator exhibits a very low insertion loss and a wide bandwidth.     

An Optimum Sectional Waveguide Taper for Quasioptical Transmission Lines

The paper considers an optimum sectional waveguide taper (OSWT) which at a shortest length of the transition region provides nearly adiabatic propagation of the fundamental mode between circular, widely different in diameter quasioptical transmission lines of class hollow dielectric waveguide (HDW). Derived as a consequence of coaxial circular-horn sections, the OSWT offers all the advantages of a simple geometry and lends itself to simple fabrication techniques. The relationships among the critical geometrical parameters and the loss calculation formulae are presented. The comparison studies show that even at a few sections, the OSWT is almost as good in performance as the parabolic taper, but the OSWT is much better from a mechanical viewpoint. And compared to the ordinary linear taper, the OSWT allows essential cut in length and loss with the broadbandness kept. The HDW-based four-sectional OSWT has been fabricated and tested in a quite broad wave range 2,5-8 mm. The testing results lend a good support to the analytical formulae lying at the basis of the design software.     

The intermediate regime of light diffraction by ultrasound in planar gyrotropic optical waveguides in an external electric field

A theoretical investigation is carried out for an intermediate regime of optoacoustic interaction, close to the Bragg one, by ultasonic Rayleigh surface waves in gyrotropic planar waveguides in an external electric field. A system of equations of associated waves is presented which describes the planar optoacoustic interaction in intermediate, Raman—Nath, and Bragg regimes of diffraction by ultrasonic surface waves in gyrotropic crystals with electrically induced anisotropy. It is shown that the intermediate (transition) regime of optoacoustic interaction, which is characterized by an angular selectivity and by the presence of several diffraction maxima, is the basic regime of diffraction. In this case diffracted light is generally elliptically polarized with an ellipticity and polarization azimuth that depend on the external electric field intensity. Translated from Zhurrnal Prikladnoi Spektroskopii, Vol. 66, No. 1, pp. 30–35, January–February, 1999.     

Analysis for Transmission Characteristics of Closed Trapezoidal-Groove Waveguide with Boundary Element Method

In this paper, the cut-off and dispersion characteristics of a new kind of closed trapezoidal-groove waveguide that has more advantages than open groove waveguides are analyzed with the help of the boundary element method, the relationship between cut-off wavelengths and variations of guide's relative sizes is discussed in detail. The calculated results are in good agreement with those in the relevant reference. So, the obtained conclusions are very important in theoretical studies and actual applications of closed trapezoidal-groove waveguides for millimeter and submillimeter waves.     

Study of RF Excited CO2 Waveguide Laser Array

RF excited CO2 waveguide laser arrays with three different structures (one-dimension and two-dimension) are reported in this paper. The output character of far-field and near-field of those lasers have studies and the phase locking between the waveguide elements has discussed. The cavity length of waveguide laser array is 380 mm and the resonator is formed by placing a plane germanium coated gold mirror and a plane ZnSe output coupler. The laser is operated with filling static gas of He∶N2∶CO2∶Xe=3∶1∶1∶0.1 mixture at 1.06×104 Pa total pressure. High output power density is achieved and the output power is 30-w with an efficiency η=10%. The output power is limited by the maximum power of RF transmitter.