Nanoporous silicon doped by Cu for gas-sensing applications

The effect of hydrogen sulphide on the current–voltage characteristics of metal–insulator–semiconductor (MIS) structures based on nanoporous silicon (Si_nanopor) under copper doping has been investigated. Scanning electron (SEM), atomic force (AFM) and optic microscopes and/or secondary ion mass spectroscopy (SIMS) were used to obtain detailed characterisation of copper cluster distribution present at the surface and pores, respectively. SIMS spectra reveal that finite gradient in copper distribution along the pores and oxidation of nanoporous silicon simultaneously can be obtained successfully under electroless deposition process. It was also shown that the doping of nanoporous silicon by Cu leads to enhanced hydrogen sulphide sensitivity of MIS structures even without catalytic active top electrodes (for example, Pd) at room temperature. Furthermore, for different types of familiar MIS structures based on nanoporous silicon, e.g., MIS structures doped or undoped by copper and by using Pd metal electrodes, the hydrogen sulphide detection at room temperature mainly depends on the modification in the height of barrier of hetero- (Al–Cu–Si_nanopor–c-Si) or Schottky-like (Pd–Cu–Si_nanopor–c-Si) structures resulting the chemical interaction of molecular H₂S gas with copper clusters at the surface and in the pores. It is demonstrated that MIS structures based on the nanoporous silicon with copper doping are more sensitive to H₂S action at room temperature. In addition, the physical mechanism explaining the observed phenomena is also discussed.     

Short note on the excitonic Mott phase

An exciton gas on a lattice is analysed in terms of a convergent hopping expansion. For a given chemical potential, our calculation provides a sufficient condition for the hopping rate to obtain an exponential decay of the exciton correlation function. This result indicates the existence of a Mott phase in which strong fluctuations destroy the long range correlations in the exciton gas at any temperature, either by thermal or by quantum fluctuations.     

Theoretical design of diamondlike superhard structures at high pressure

Diamond, as the hardest known material, has been widely used in industrial applications as abrasives, coatings, and cutting and polishing tools, but it is restricted by several shortcomings, e.g., its low thermal and chemical stability. Considerable efforts have been devoted to designing or synthesizing the diamond-like B–C–N–O compounds, which exhibit excellent mechanical property. In this paper, we review the recent theoretical design of diamond-like superhard structures at high pressure. In particular, the recently designed high symmetric phase of low-energy cubic BC3 meets the experimental observation, and clarifies the actual existence of cubic symmetric phase for the compounds formed by B–C–N–O system,besides the classical example of cubic boron nitride.     

Small amplitude ion-acoustic double layers with cold electron beam and q-nonextensive electrons

Small amplitude ion-acoustic double layers in an unmagnetized and collisionless plasma consisting of cold positive ions, q-nonextensive electrons, and a cold electron beam are investigated. Small amplitude double layer solution is obtained by expanding the Sagdeev potential truncated method. The effects of entropic index q, speed and density of cold electron beam on double layer structures are discussed.     

Electronic transmission and dwell time on a double barrier system with an accelerating quantum well

Resonant tunneling quantum structures consist of asymmetric wells and barriers have been investigated to find their optimized geometrical parameters and potential profile by the numerical calculations. The results show that the widths and the depths of the asymmetric wells have a significant effect on the transmission coefficient and the dwell time. The properties exhibited in this work may establish guidance to the device applications.     

Spin-polarized current and tunnel magnetoresistance in heterogeneous single-barrier magnetic tunnel junctions

Current in heterogeneous tunnel junctions is studied in the framework of the parabolic conduction-band model. The developed model of the electron tunneling takes explicitly into account the difference of effective masses between ferromagnetic and insulating layers and between conduction subbands. Calculations for Fe/MgO/Fe-like structures have shown the essential impact of effective mass differences in regions (constituents) of the structure on the tunnel magnetoresistance of the junction.     

Electronic properties of anatase TiO2 doped by lanthanides: A DFT+U study

The effects of mono-doping of 4f lanthanides with and without oxygen vacancy defect on the electronic structures of anatase TiO₂ have been studied by first-principles calculations with DFT+U (DFT with Hubbard U correction) to treat the strong correlation of Ti 3d electrons and lanthanides 4f electrons. Our results revealed that dopant Ce is easy to incorporate into the TiO₂ host by substituting Ti due to its lower substitutional energy (∼−2.0 eV), but the band gap of the system almost keeps intact after doping. The Ce 4f states are located at the bottom of conduction band, which mainly originates from Ti 3d states. The magnetic moment of doped Ce disappears due to electron transfer from Ce to the nearest O atoms. For Pr and Gd doping, their substitutional energies are similar and close to zero, indicating that both of them may also incorporate into the TiO₂ host. For Pr doping, some 4f spin-down states are located next to the bottom of the conduction band and narrow the band gap of the doping system. However, for Gd doping, the 4f states are located in deep valence band and there is no intermediate band in the band gap. The magnetic moment of dopant Gd is close to the value of isolated Gd atom (∼7 μB), indicating no overlapping between Gd 4f with other orbitals. For Eu, it is hard to incorporate into the TiO₂ host due to its very higher substitutional energy. The results also indicated that oxygen vacancy defect may enhance the adsorption of the visible light in Ln-doped TiO₂ system.     

Experimental study of wave dispersion and attenuation in concrete

Results from an experimental study concerning wave propagation in cementitious materials are presented in this paper. Narrow band pulses at several frequencies were introduced into specimens of cement paste, mortar and concrete allowing direct measurement of longitudinal wave velocities and amplitude for each frequency. It is shown that aggregate content play an important role in wave propagation increasing considerably the wave velocity, while the aggregate size seems to control the attenuation observed. Slight velocity variations observed with frequency are discussed in relation to the degree of inhomogeneity of the materials.     

Similarity-Projection Structures: The Logical Geometry of Quantum Physics

Similarity-Projection structures abstract the numerical properties of real scalar product of rays and projections in Hilbert spaces to provide a more general framework for Quantum Physics. They are characterized by properties that possess direct physical meaning. They provide a formal framework that subsumes both classical Boolean logic concerned with sets and subsets and quantum logic concerned with Hilbert space, closed subspaces and projections. They shed light on the role of the phase factors that are central to Quantum Physics. The generalization of the notion of a self-adjoint operator to SP-structures provides a novel notion that is free of linear algebra. This work was partially supported by the Jean and Helene Alfassa fund for research in Artificial Intelligence.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.