Influence of pretreatment conditions on low-temperature CO oxidation over Au/MOx/Al2O3 catalysts

Composite oxide MO_x/Al₂O₃ supported gold catalysts for low-temperature CO oxidation were prepared and investigated. The presence of transition metal oxide was proved to be beneficial to the improvement of catalytic performance of Au/Al₂O₃ catalysts for low-temperature CO oxidation. Furthermore, the influence of various pretreatment conditions on Au/MO_x/Al₂O₃ catalysts was studied carefully. The image of TEM showed that gold catalyst with small gold particles only in the form of a fine dispersion exhibited highly catalytic activity. The XPS, Fourier transform infrared (FTIR) spectroscopy characterization results of Au/FeO_x/Al₂O₃ catalyst showed that gold catalysts having partially oxidized gold species have the best catalytic performance. One possible pathway for CO oxidation on Au/FeO_x/Al₂O₃ catalyst is that the CO adsorbed on gold particles reacts with adsorbed oxygen, which is possible to occur on oxygen vacancies on the support or at the metal–support interface.     

聚苯乙烯/蒙脱土熔融插层复合的研究

用熔融法制备了聚苯乙烯／蒙脱土插层复合材料，用Ｘ 射线衍射、ＤＳＣ等手段研究了复合材料的结构与性能．聚苯乙烯熔体不能插层于钠基蒙脱土中，但能插层于经有机化合物处理过的蒙脱土中．     

Electrochemical Reduction of Monochlorinated Hydrocarbons at a Hydrophobic Zn/PTFE Composite‐Electroplated Zn Electrode in a Water‐Acetonitrile Mixture

Composite‐electroplating of zinc particles with polytetrafluoroethylene at a zinc substrate resulted in a working electrode which could be used at high negative potentials (to ?2.5 V vs. Ag/AgCl) without significant hydrogen evolution. The electrodes were characterized by SEM and CV and were used to detect organochloride compounds in a water‐acetonitrile mixture, by potential step methods.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

Creeping motion of an assemblage of composite spheres relative to a fluid

The sedimentation of a homogeneous distribution of spherical composite particles and the fluid flow through a bed of these particles are investigated theoretically. Each composite particle is composed of a spherical solid core and a surrounding porous shell. In the fluid-permeable porous shell, idealized hydrodynamic frictional segments are assumed to distribute uniformly. The effect of interactions among the particles is taken into explicit account by employing a fundamental cell-model representation which is known to provide good predictions for the motion of a swarm of nonporous spheres within a fluid. In the limit of a small Reynolds number, the Stokes and Brinkman equations are solved for the flow field in a unit cell, and the drag force exerted by the fluid on the particle is obtained in a closed form. For a distribution of composite spheres, the normalized mobility of the particles decreases or the particle interactions increase monotonically with a decrease in the permeability of their porous shells. The effect of particle interactions on the creeping motion of composite spheres relative to a fluid can be quite significant in some situations. In the limiting cases, the analytical solutions describing the drag force or mobility for a suspension of composite spheres reduce to those for suspensions of solid spheres and of porous spheres. The hydrodynamic behavior for composite spheres may be approximated by that for permeable spheres when the porous layer is sufficiently thick, depending on the permeability.     

Synthesis and characterization of styrene grafted carbon nanotube and its polystyrene nanocomposite

Effective side wall functionalization of single-walled carbon nanotube (SWCNT) with 4-vinylaniline was carried out through solvent free functionalization. The functionalized SWCNT was characterized through FT-IR and NMR. Typical peaks to identify the functionalization were observed. Thermal analysis shows around 48% weight loss in functionalized SWCNT in comparison to the pure SWCNT. The ratio of disordered to order transition (I_D/I_G) in FT-Raman, indicated the generation of some surface defects due to functionalization. Near infrared spectrum of functionalized SWCNT also confirmed the functionalization of SWCNT. The polystyrene nanocomposite materials were prepared with functionalized SWCNT as fillers by solution casting from tetrahydrofuran. The functionalized SWCNT nanocomposite showed significant improvement in mechanical properties and electrical properties. The dispersibility of the carbon nanotube in the composite was investigated by using scanning electron microscopy.     

The melt elastic behavior of polypropylene/glass bead composites in capillary flow

The melt extrudate swell and entry pressure losses are important characteristics of elastic properties during die extrusion of polymeric fluids. They are usually expressed with die-swell ratio (B) and entry pressure drop (ΔP_o). In the present paper, the die-swell behavior and entrance pressure drop of a polypropylene (PP) filled with A-glass beads were investigated by using a Rosand capillary rheometer to identify the effects of the filler contents and extrusion rate on the elastic behavior of the sample melts. The experiments were carried out under the conditions with an apparent shear rate range of 50–10⁴ s⁻¹ and a temperature of 190 °C. The results showed that B increased nonlinearly with increasing shear rate at the wall (γ_w), and increased linearly with the increase of shear stress at the wall (τ_w). With the increase of the volume fraction of the fillers B decreased nonlinearly. Similarly, the entry pressure drop increased linearly with the increase of τ_w, whereas the influence of the filler concentration on ΔP_o was insignificant in this case. Furthermore, B increased as a linear function of ΔP_o, and extension stress (σ_e) increased nonlinearly with increasing γ_w.     

Properties of the random search in global optimization

From theorems which we prove about the behavior of gaps in a set ofN uniformly random points on the interval [0, 1], we determine properties of the random search procedure in one-dimensional global optimization. In particular, we show that the uniform grid search is better than the random search when the optimum is chosen using the deterministic strategy, that a significant proportion of large gaps are contained in the uniformly random search, and that the error in the determination of the point at which the optimum occurs, assuming that it is unique, will on the average be twice as large using the uniformly random search compared with the uniform grid. In addition, some of the properties of the largest gap are verified numerically, and some extensions to higher dimensions are discussed. The latter show that not all of the conclusions derived concerning the inadequacies of the one-dimensional random search extend to higher dimensions, and thaton average the random search is better than the uniform grid for dimensions greater than 6.This paper is based on work started in the Statistics Department of Princeton University when the first author was visiting as a Research Associate. Part of this research was supported by the Office of Naval Research, Contract No. 0014-67-A-0151-0017, and by the US Army Research Office—Durham, Contract No. DA-31-124-ARO-D-215.2 The authors wish to thank B. Omodei for his careful work in preparing the programs for the results of Figs. 1–2 and Table 1. The computations were performed on the IBM 360/50 of the Australian National University's Computer Centre. Thanks are also due to R. Miles for suggestions regarding the extension of the results to multidimensional regions, and to P. A. P. Moran and R. Brent for suggestions regarding the evaluation of the integral ₀ ¹ ... ^0/1 (x ₁ ² + ... +x _n ^/2 )^1/2 dx ₁ ...dx _n.     

基于双尺度渐近分析的有限元算法

1．引言正如文山所说，由于复合材料和周期结构的材料系数ail（x）在局部区域内间断且跳跃性很大，加上区域内含有周期性洞穴或裂缝，且周期长度很小．一般而言，直接采用有限元方法进行数值模拟，其计算量大得惊人，甚至难以实现．文山针对这种特征，提出了一种可计算的双尺度渐近分析模式，本文在此基础上给出了相应的有限元算法，它包括：1．周期解在一个基本构造上的有限元计算；2．边界层的有限元计算．同时，给出了相应的误差分析．2．周期解的有限元计算首先考虑下列形式的边值问题；其中把，代E尸（on叫，iii（0关于E—（EI，ZZ…     

Decentralized operation strategies for an integrated building energy system using a memetic algorithm

The emerging technology in net-zero building and smart grids drives research moving from centralized operation decisions on a single building to decentralized decisions on a group of buildings, termed a building cluster which shares energy resources locally and globally. However, current research has focused on developing an accurate simulation of single building energy usage which limits its application to building clusters as scenarios such as energy sharing and competition cannot be modeled and studied. We hypothesize that the study of energy usage for a group of buildings instead of one single building will result in a cost effective building system which in turn will be resilient to power disruption. To this end, this paper develops a decision model based on a building cluster simulator with each building modeled by energy consumption, storage and generation sub modules. Assuming each building is interested in minimizing its energy cost, a bi-level operation decision framework based on a memetic algorithm is proposed to study the tradeoff in energy usage among the group of buildings. Two additional metrics, measuring the comfort level and the degree of dependencies on the power grid are introduced for the analysis. The experimental result demonstrates that the proposed framework is capable of deriving the Pareto solutions for the building cluster in a decentralized manner. The Pareto solutions not only enable multiple dimensional tradeoff analysis, but also provide valuable insight for determining pricing mechanisms and power grid capacity.