In recent years, the self-assembled growth of semiconductor nanostructures, that show quantum size effects, has been of considerable interest. Laser devices operating with self-assembled InAs quantum dots (QDs) embedded in GaAs have been demonstrated. Here, we report on the InAs/GaAs system and raise the question of how the shape of the QDs changes with the orientation of the GaAs substrate. The growth of the InAs QDs is understood in terms of the Stranski–Krastanow growth mode. For modeling the growth process, the shape and atomic structure of the QDs have to be known. This is a difficult task for such embedded entities.
In our approach, InAs is grown by molecular beam epitaxy on GaAs until self-assembled QDs are formed. At this point the growth is interrupted and atomically resolved scanning tunneling microscopy (STM) images are acquired. We used preparation parameters known from the numerous publications on InAs/GaAs. In order to learn more about the self-assemblage process we studied QD formation on different GaAs(0 0 1), (1 1 3)A, and (
)B substrates. From the atomically resolved STM images we could determine the shape of the QDs. The quantum “dots” are generally rather flat entities better characterized as “lenses”. In order to achieve this flatness, the QDs are terminated by high-index bounding facets on low-index substrates and vice versa. Our results will be summarized in comparison with the existing literature. 相似文献
The mechanism of light-induced transformation in the salicylideneaniline molecule was studied by semiempirical PM3 calculations. The structures and energies of the minima and saddle points (transition states) on the S0, S1 and T1 potential energy hypersurfaces (PESs) were obtained, together with the gradient lines on the PESs. The structure-energy scheme was compared with the experimental findings. According to the results obtained, the following principle processes are observed: fast S1 excited state intramolecular proton transfer (ESIPT), followed by typical ESIPT fluorescence; the formation of two S1 twisted intramolecular charge transfer (TICT) structures which quench the ESIPT fluorescence; the diabatic formation of two ground state metastable coloured “post-TICT” structures responsible for photochromism. 相似文献
Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m. 相似文献
The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO2 surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn4+ surface cations into a reduced surface with Sn2+ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO2. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO2 are discussed and the few surface science studies of doped SnO2 are reviewed. Epitaxial SnO2 films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO2 surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized. 相似文献
Atomic chemisorption of hydrogen and oxygen on the Ni(100) surface has been studied using an Effective Core Potential (ECP) approach described in a previous paper. Clusters of up to 50 nickel atoms have been used to model the surface. The computed chemisorption energies are 62 kcal/mol (exp. 63 kcal/mol) for hydrogen and 106 kcal/mol (exp. 115–130 kcal/mol) for oxygen. Correlating the adsorbate and the cluster-adsorbate bonds is extremely important for obtaining accceptable results, particularly for oxygen. Reasonable convergence of chemisorption energies is obtained with 40–50 cluster atoms for both hydrogen and oxygen. For hydrogen the addition of a third cluster layer stabilizes the results considerably. Both hydrogen and oxygen are adsorbed at (or close to) the four-fold hollow site. The calculated barriers for surface migration are also in good agreement with the experimental estimates. The calculated equilibrium heights above the surface are on the other hand too high compared with experiments. This disagreement is believed to be due to core-valence correlation effects, which are not incorporated in the present ECP. The cluster convergence for the height above the surface is much slower than for the chemisorption energy. 相似文献
Fourier transform infrared reflection-absorption spectroscopy (FT-IRAS) has been used to study the orientation and coordination of glycine, L-phenylalanine and L-histidine on gold and copper surfaces. It was found that glycine and L-histidine were weakly adsorbed (physisorbed) in the zwitterionic form on gold. The surface chemical bonding of L-histidine and L-phenylalanine to copper were chemical rather than physical by nature. Conclusive evidence was obtained for coordination to copper through both the amino-nitrogen and carboxylate-oxygen atoms. 相似文献
Combinatorial chemistry is a laboratory emulation of natural recombination and selection processes. Strategies in this developing discipline involve the generation of diverse, molecular libraries through combinatorial synthesis and the selection of compounds that possess a desired property. Such approaches can facilitate the identification of ligands that bind to biological receptors, promoting our chemical understanding of cellular processes. This article illustrates that the coupling of combinatorial synthesis, multidimensional NMR spectroscopy, and biochemical methods has enhanced our understanding of a protein receptor used commonly in signal transduction, the Src Homology 3 (SH3) domain. This novel approach to studying molecular recognition has revealed a set of rules that govern SH3–ligand interactions, allowing models of receptor–ligand complexes to be constructed with only a knowledge of the polypeptide sequences. Combining combinatorial synthesis with structural methods provides a powerful new approach to understanding how proteins bind their ligands in general. 相似文献
Photochemical pericyclic reactions are believed to proceed via a so-called pericyclic minimum on the lowest excited potential surface (S(1)), which is common to both the forward and backward reactions. Such a common intermediate has never been directly detected. The photointerconversion of 1,3-butadiene and cyclobutene is the prevailing prototype for such reactions, yet only diene ring closure proceeds with the stereospecificity that the Woodward-Hoffmann rules predict. This contrast seems to exclude a common intermediate. Using ultrafast spectroscopy, we show that the excited states of two cyclobutene/diene isomeric pairs are linked by not one, but by two common minima, p* and ct*. Starting from the diene side (cyclohepta-1,3-diene and cycloocta-1,3-diene), electrocyclic ring closure passes via the pericyclic minimum p*, whereas ct* is mainly responsible for cis-trans isomerization. Starting from the corresponding cyclobutenes (bicyclo[3.2.0]heptene-6 and bicyclo[4.2.0]octene-7), the forbidden isomer is formed from ct*. The path branches at the first (S(2)/S(1)) conical intersection towards p* and ct*. The fact that the energetically unfavorable ct* path can compete is ascribed to a dynamic effect: the momentum in C=C twist direction, acquired--such as in other olefins--in the Franck-Condon region of the cyclobutenes. 相似文献
This paper reviews the construction of molecular potential-energy surfaces by an interpolation method which has been developed
over the last several years. The method uses ab initio quantum chemistry calculations of the molecular electronic energy in
an automated procedure to construct global potential- energy surfaces which can be used to simulate chemical reactions with
either classical or quantum dynamics. The methodology is explained and several applications are presented to illustrate the
approach.
Received: 22 February 2002 / Accepted: 2 May 2002 / Published online: 6 November 2002
Correspondence to: M. A. Collins e-mail: collins@rsc.anu.edu.au
Acknowledgements. The methods described in this overview are the result of collaborations with former members of my group, in particular with
Josef Ischtwan, Meredith Jordon, Keiran Thompson and Ryan Bettens. I am also indebted for inspiration gained from many discussions
with my colleagues Leo Radom and Donghui Zhang (National University of Singapore). This work has been supported by the Supercomputer
Facility of the Australian National University and the Australian Partnership for Advanced Computing. 相似文献
Computed potential energy surfaces are often required for computation of such observables as rate constants as a function of temperature, product branching ratios, and other detailed properties. We have found that computation of the stationary points/reaction pathways using CASSCF/derivative methods, followed by use of the internally contracted CI method with the Dunning correlation consistent basis sets to obtain accurate energetics, gives useful results for a number of chemically important systems. Applications to complex reactions leading to NOx and soot formation in hydrocarbon combustion are discussed. 相似文献