HL-2M 磁体系统安装中的定位与测量

为提高磁体系统安装精度,在 HL-2M 集成大厅建立 63 个基准点构成测量基准网,并利用激光跟 踪仪等高精度测量设备建立每个磁体的局部坐标系,测量特征点的局部坐标;基于测量基准网和公共测量点,采 用最佳拟合得到坐标转换矩阵,以此得到特征点在测量基准网的位置,指导磁体安装。完成安装后的中心柱同支 撑基础的同轴度为∅2.03mm;PF1~PF4 线圈安装标高偏差为±0.5mm,与中心柱的同轴度为∅2.60mm;PF5/6/7/8 线圈与中心柱的同轴度偏差小于∅3.00mm,标高偏差在[−1mm, 1mm]区间内。基于以上方法所得到的线圈安装精 度都满足设计需求。     

HL-2M 装置初始等离子体放电阶段的直流辉光放电清洗系统研制

基于 HL-2M 托卡马克初始等离子体放电的工程需求,设计并研制了直流辉光放电清洗系统,包括电 极、馈线、电源、控制以及监测等关键部件和辅助子系统。研制完成后开展了系统装配和工程调试,并投入到首 次等离子体放电。实验结果表明,该直流辉光放电系统运行稳定、可靠,且此辉光放电清洗显著降低了真空室本 底杂质浓度,能满足 HL-2M 装置初始等离子体放电的壁条件需求。     

HL-2M 装置烘烤系统管路应力的仿真分析与优化

根据 HL-2M 装置烘烤系统管路设计,建立烘烤系统的管道应力计算模型。对烘烤系统管路作初始 支架设计,并采用系统内的最高温度分布,对烘烤系统进行热应力计算,分析管道应力及设备管口载荷。以热应 力计算结果为依据,对管路布置进行优化,并改善支架的设计,对烘烤系统进行应力校核计算,完成烘烤系统可 靠性验证计算,完成了管口位移量计算。     

HL-2M 装置冷却水系统介绍

介绍了 HL-2M 装置冷却水系统的组成以及各子系统的循环流程、运行原理和运行参数。      

HL-2M 装置供电系统研制

为满足 HL-2M 装置的供电需求,须配套建设相应的供电系统。通过仿真计算 HL-2M 装置的总体供 电需求,考虑到 HL-2A 装置现有的供电系统设备,提出了兼顾 HL-2A 和 HL-2M 装置供电需求的总体配置方案。介绍了国内首台 300MVA 立式交流脉冲发电机组、磁体电源、高压电源和电源控制系统的研制情况。     

On the Locally Polynomial Complexity of the Projection-Gradient Method for Solving Piecewise Quadratic Optimisation Problems

This paper proposes a method for solving optimisation problems involving piecewise quadratic functions. The method provides a solution in a finite number of iterations, and the computational complexity of the proposed method is locally polynomial of the problem dimension, i.e., if the initial point belongs to the sufficiently small neighbourhood of the solution set. Proposed method could be applied for solving large systems of linear inequalities.     

An Efficient Chosen-Plaintext Attack on an Image Fusion Encryption Algorithm Based on DNA Operation and Hyperchaos

This paper proposes a more efficient attack method on an image fusion encryption algorithm based on DNA operation and hyperchaos. Although several references have reported some methods to crack the image encryption algorithm, they are not the most efficient. The proposed chosen-plaintext attack method can break the encryption scheme with (4×N/M+1) or (M/(4×N)+1) chosen-plaintext images, which is much less than the number of chosen-plaintext images used in the previous cracking algorithms, where M and N represent the height and width of the target ciphertext image, respectively. The effectiveness of the proposed chosen-plaintext attack is supported by theoretical analysis, and verified by experimental results.     

Application of Euler Neural Networks with Soft Computing Paradigm to Solve Nonlinear Problems Arising in Heat Transfer

In this study, a novel application of neurocomputing technique is presented for solving nonlinear heat transfer and natural convection porous fin problems arising in almost all areas of engineering and technology, especially in mechanical engineering. The mathematical models of the problems are exploited by the intelligent strength of Euler polynomials based Euler neural networks (ENN’s), optimized with a generalized normal distribution optimization (GNDO) algorithm and Interior point algorithm (IPA). In this scheme, ENN’s based differential equation models are constructed in an unsupervised manner, in which the neurons are trained by GNDO as an effective global search technique and IPA, which enhances the local search convergence. Moreover, a temperature distribution of heat transfer and natural convection porous fin are investigated by using an ENN-GNDO-IPA algorithm under the influence of variations in specific heat, thermal conductivity, internal heat generation, and heat transfer rate, respectively. A large number of executions are performed on the proposed technique for different cases to determine the reliability and effectiveness through various performance indicators including Nash–Sutcliffe efficiency (NSE), error in Nash–Sutcliffe efficiency (ENSE), mean absolute error (MAE), and Thiel’s inequality coefficient (TIC). Extensive graphical and statistical analysis shows the dominance of the proposed algorithm with state-of-the-art algorithms and numerical solver RK-4.     

晚期HEMP作用下铁路牵引供电系统GIC算法研究

高空核爆电磁脉冲晚期效应（E₃）会引起地磁场剧烈变化并形成地面感应电场。感应电场等效为激励源与地面长距离导体和大地构成回路,产生地磁感应电流 （GIC）。GIC可引起牵引供电系统中变压器直流偏磁,从而严重威胁牵引供电系统的安全运行。本文基于平面波理论、分层大地电导率模型并结合牵引供电系统的电路模型,提出E₃作用下的牵引供电系统GIC算法,并以带回流线的直接供电方式的铁路牵引供电系统为例,首次计算了系统GIC情况。结果表明,该供电方式下牵引供电系统中的GIC远大于系统中变压器等设备的耐受值,为进一步研究E₃作用下牵引供电系统效应及我国铁路设备选型、灾害防治等提供支撑。     

电气线路互联系统线缆抗高空核电磁脉冲耦合效应

高空核电磁脉冲（HEMP）对电子设备的耦合途径主要有两方面：一方面是通过装备（产品）上的天线耦合通道进入到电子系统内的“前门耦合”方式;另一方面则是“后门耦合”,即通过装备（产品）上的壳体、电源线、电缆、机箱的缝隙、孔洞等途径进行耦合。主要研究电气线路互联系统(EWIS)线缆抗高空核电磁脉冲耦合效应,通过研究HEMP干扰的特征、能量分布,搭建HEMP数学模型,采用控制变量法,改变EWIS线缆类型、离地高度等要素,通过在CST上建立仿真模型以及开展试验,分析HEMP对电子设备造成的影响程度,得到HEMP耦合效应的一般性结论与规律。