An algebraic multigrid solver for Navier-Stokes problems

An efficient numerical method is presented for solving the equations of motion for viscous fluids. The equations are discretized on the basis of unstructured finite element meshes and then solved by direct iteration. Advective fluxes are temporarily fixed at each iteration to provide a linearized set of coupled equations which are then also solved by iteration using a fully implicit algebraic multigrid (AMG) scheme. A rapid convergence to machine accuracy is achieved that is almost mesh-independent. The scaling of computing time with mesh size is therefore close to the optimum.     

集值映射的切导数与向量优化问题的最优性条件

利用集值映射切导数与半可微概念，给出了无约束与具约束的集值向量优化问题局部真有效解与局部强有效解的最优性条件。     

广义拟变分不等式解集的稳定性及本质连通区的存在性

在赋范线性空间下．讨论广义拟变分不等式解集的稳定性，证明了满足一定连续性和凸性条件的广义拟变分不等式问题构成的空间M中，大多数(在Baire分类意义下)广义拟变分不等式问题的解集是稳定的，并证明了M中每一个广义拟变分不等式的解集至少存在一个本质连通区。     

等厚双层涂层材料受集中力作用的平面问题理论解

界面应力的正确评价是分析薄膜涂层材料力学特性的难题之一。利用镜像点法和Dirichlet等值性原理，本文推导了等厚双层薄膜涂层材料受表面集中力作用的平面问题理论解。该显式理论解是以固定在各镜像点上的局部坐标系下的Goursat应力函数的形式给出的。对应于高阶镜像点的应力函数，可通过递推的方法，从对应于低阶镜像点的应力函数求得，而且也易于计算机编程。随着镜像点阶数的增大，它与界面的距离也越来越大，因而相对应的应力函数对界面应力的影响越来越小。最后的算例表明，只需考虑前面有限个镜像点，便可获得足够精度的解。该理论解可作为格林函数，以求解复杂问题的理论解，也可用作边界元法的基本解，提高数值计算的精度和效率。     

Orientation and relaxation of polymer–clay solutions studied by rheology and small-angle neutron scattering

The influence of shear on viscoelastic solutions of poly(ethylene oxide) (PEO) and clay [montmorillonite, i.e., Cloisite NA+ (CNA)] was investigated with rheology and small-angle neutron scattering (SANS). The steady-state viscosity and SANS were used to measure the shear-induced orientation and relaxation of the polymer and clay platelets. Anisotropic scattering patterns developed at much lower shear rates than in pure clay solutions. The scattering anisotropy saturated at low shear rates, and the CNA clay platelets aligned with the flow, with the surface normal parallel to the gradient direction. The cessation of shear led to partial and slow randomization of the CNA platelets, whereas extremely fast relaxation was observed for laponite (LRD) platelets. These PEO–CNA networklike solutions were compared with previously reported PEO–LRD networks, and the differences and similarities, with respect to the shear orientation, relaxation, and polymer–clay interactions, were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3102–3112, 2004     

Synthesis and properties of poly(amic acid)s and polyimides based on 2,2′,6,6′‐biphenyltetracarboxylic dianhydride

Poly(amic acid)s (PAAs) having the high solution stability and transmittance at 365 nm for photosensitive polyimides have been developed. PAAs with a twisted conformation in the main chains were prepared from 2,2′,6,6′‐biphenyltetracarboxylic dianhydride (2,2′,6,6′‐BPDA) and aromatic diamines. Imidization of PAAs was achieved by chemical treatment using trifluoroacetic anhydride. Among them, the PAA derived from 2,2′,6,6′‐BPDA and 4,4′‐(1,3‐phenylenedioxy)dianiline was converted to the polyimide by thermal treatment. The heating at 300 °C under nitrogen did not complete thermal imidization of PAAs having glass‐transition temperatures (T_g)s higher than 300 °C to the corresponding PIs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6385–6393, 2006     

Partial molal heat capacities of aqueous tetraalkylammonium bromides as functions of temperature

Enthalpies of solution have been measured from 5 to 85°C for aqueous tetraethyl- and tetrapropylammonium bromides, and the integral heat method is employed to evaluate for these electrolytes over a wide temperature range. Data taken from the literature have been used to evaluate for aqueous Bu₄NBr over a similar temperature range. These data, along with similar data for Me₄NBr, previously reported, have been used to evaluate absolute ionic heat capacities. While the absolute values agree only qualitatively with two other methods of division, the temperature dependences of the three methods essentially agree up to 65°C. Heat capacities due to structural effects on the solvent, obtained by subtracting the inherent heat capacities of the ions, are extraordinarily positive for all four tetraalkylammonium ions and have negative temperature coefficients, indicating that all four ions, including the tetramethylammonium ion, are structure-making ions.     

Thermodynamic properties of organic compounds in aqueous solution. II. Apparent molal heat capacities of piperidines,morpholines, and piperazines

Apparent molal heat capacities of some piperidine, morpholine, and piperazine derivatives in aqueous solution have been determined by adiabatic calorimetry in the temperature range 20–55°C and in the molality range 0.2–1m. Comparison of experimental values with those calculated through group contributions, found for monofunctional compounds, indicates strong interactions between the hydrophilic centers. An interpretation is given of the possible mechanism of this interaction. Also, values of ΔC _p for the addition reaction of proton to nitrogen centers of mono- and bifunctional organic compounds are examined.     

原子吸收光谱法测定裂解汽油中铅

报道了用火焰原子吸收光谱法测定裂解汽油中铅的方法。用碘 二甲苯溶液对汽油进行氧化处理,用稀硝酸进行萃取,萃取后浓缩液用原子吸收光谱法进行测定。铅含量在0～7.0μg·ml-1范围内符合比耳定律。对汽油样品进行分析时,相对标准偏差小于3.95%,对样品进行加标回收试验,回收率为97.7%～101.7%,方法的精密度和准确度良好。     

Heterogeneous ECE Processes at Channel Electrodes: Analytical Solution for all Reaction Rate Constants and Different Diffusion Coefficients

An analytical solution is developed for heterogeneous ECE processes occurring at channel electrode surface for both laminar and turbulent flow. The solution explicitly links the behavior of ECE processes and the parameters. A simple expression of the effective number of electrons transferred, covering all the reaction rate constants and different diffusion coefficients of the reactant A and the intermediate product B, is obtained. Excellent agreement with previous numerical and analytical results is shown . Parametric studies illustrate the effects of diffusion coefficients, hydrodynamic factors and reaction rate constants on the effective number of electrons transferred and the currents.