偶氮二苯甲酸及联吡啶构筑的三重穿插钴配位聚合物的溶剂热合成、结构和热稳定性研究

通过溶剂热方法合成了一个三重穿插的钴的配位聚合物,[Co(ADB)(H2ADB)(BPY)].2CH4OH(H2ADB为4,4′-偶氮二苯甲酸,BPY为4,4′-联吡啶),并通过元素分析、红外光谱、热分析和X射线单晶衍射对其进行了表征。晶体结构研究结果表明该配合物属单斜晶系,C2/c空间群。在配合物中,每个钴原子分别与4个羧酸配体上的4个氧原子和2个BPY分子的氮原子配位,形成扭曲八面体几何构型。相邻钴原子之间通过ADB2-、H2ADB和BPY相连形成二维网络结构。有意思的是,在分子中存在3个相互独立但结构相同的二维网状结构,形成三重贯穿。     

大孔高镍LiNi0.8Co0.1Mn0.1O2正极材料的制备及其电化学性能研究

本工作以聚甲基丙烯酸甲酯(PMMA)微球组装成的胶晶模板作为铸模,溶胶-凝胶法辅助获得大孔LiNi0.8Co0.1Mn0.1O2 (NCM811)正极材料.结果 表明,利用PMMA作为造孔剂,形成了由100nm的颗粒堆积而成的大孔结构,这种结构有效地提高了材料的倍率性能和循环稳定性.大孔NCM811在0.1C的首次放电...     

PPV-PDMeOPV共聚物发光性质的实验和理论研究

具有优良电致发光性能的有机聚合物材料的研制及其发光性能和应用的研究是９０年代新兴的高科技领域．聚对苯乙炔［Ｐｏｌｙ（ｐ－ｐｈｅｎｙｌｅｎｅｖｉｎｙｌｅｎｅ）,缩写为ＰＰＶ,又称聚苯撑乙烯］是这一领域最先研制出来的具有代表性的材料［１,２］．为改变ＰＰ...     

还原氧化石墨烯/碳纳米管/Co_3O_4三元复合材料的制备与电化学性能

将低温水热反应和低温热处理相结合,制备了含还原氧化石墨烯(RGO)、碳纳米管(CNTs)和Co3O4的三元纳米复合材料RGO-CNTs-Co3O4;利用X射线衍射仪、扫描电子显微镜、透射电子显微镜分析了合成产物的相组成和微观结构,分析了其形成过程;并利用电化学测试装置测定了其作为锂离子电池负极材料的电化学性能.结果表明,在合成反应过程中,氧化石墨烯被还原剂肼还原为石墨烯,同时在石墨烯和CNTs表面生成氢氧化钴;再经低温热处理得到RGO-CNTs-Co3O4三元复合材料.Co3O4纳米颗粒均匀分散在由RGO片层和CNTs组成的三维网络结构中;这种三维网络结构既有利于电子和离子的传输,又能够有效抑制Co3O4在脱嵌锂过程中因体积变化引起的结构破坏.总体而言,合成的新型三元复合材料具有高的比容量以及良好的循环性能与倍率性能.     

HFIP-Functionalized Co3O4 Micro-Nano-Octahedra/rGO as a Double-Layer Sensing Material for Chemical Warfare Agents

Semiconductor metal oxides (SMO)-based gas-sensing materials suffer from insufficient detection of a specific target gas. Reliable selectivity, high sensitivity, and rapid response–recovery times under various working conditions are the main requirements for optimal gas sensors. Chemical warfare agents (CWA) such as sarin are fatal inhibitors of acetylcholinesterase in the nerve system. So, sensing materials with high sensitivity and selectivity toward CWA are urgently needed. Herein, micro-nano octahedral Co₃O₄ functionalized with hexafluoroisopropanol (HFIP) were deposited on a layer of reduced graphene oxide (rGO) as a double-layer sensing materials. The Co₃O₄ micro-nano octahedra were synthesized by direct growth from electrospun fiber templates calcined in ambient air. The double-layer rGO/Co₃O₄-HFIP sensing materials presented high selectivity toward DMMP (sarin agent simulant, dimethyl methyl phosphonate) versus rGO/Co₃O₄ and Co₃O₄ sensors after the exposure to various gases owing to hydrogen bonding between the DMMP molecules and Co₃O₄-HFIP. The rGO/Co₃O₄-HFIP sensors showed high stability with a response signal around 11.8 toward 0.5 ppm DMMP at 125 °C, and more than 75 % of the initial response was maintained under a saturated humid environment (85 % relative humidity). These results prove that these double-layer inorganic–organic composite sensing materials are excellent candidates to serve as optimal gas-sensing materials.     

Detailed Description of Pulse Isotopic Exchange Method for Analyzing Oxygen Surface Exchange Behavior on Oxide Ion Conductors

A novel pulse ¹⁸O-¹⁶O isotopic exchange (PIE) technique for measurement of the rate of oxygen surface exchange of oxide ion conductors was presented. The technique employs a continuous flow packed-bed micro-reactor loaded with the oxide powder. The isothermal response to an ¹⁸O-enriched pulse passing through the reactor, thereby maintaining chemical equilibrium, is measured by on-line mass spectrometry. Evaluation of the apparent exchange rate follows from the uptake of ¹⁸O by the oxide at given reactor residence time and surface area available for exchange. The developed PIE technique is rapid, simple and highly suitable for screening and systematic studies. No rapid heating/quenching steps are required to facilitate ¹⁸O tracer anneal or analysis, as in other commonly used techniques based upon oxygen isotopic exchange. Moreover, the relative distribution of the oxygen isotopologues ¹⁸O₂, ¹⁶O¹⁸O, and ¹⁶O₂ in the effluent pulse provides insight into the mechanism of the oxygen exchange reaction. The PIE technique has been demonstrated by measuring the exchange rate of selected oxides with enhanced oxide ionic conductivity in the range of 350?900 oC. Analysis of the experimental data in terms of a model with two consecutive, lumped steps for the isotopic exchange reaction shows that for mixed conductors Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ(BSCF) and La₂NiO_4+δ the reaction is limited by the apparent rate of dissociative adsorption of O₂ molecules at the oxide surface. For yttria-stabilized zirconia (YSZ), a change-over takes place, from rate-limitations by oxygen incorporation below ∽800 oC to rate-limitations by O₂ dissociative adsorption above this temperature. Good agreement is obtained with exchange rates reported for these materials in literature.     

LiCoO2 Hollow Nanofibers by Co‐Electrospinning Sol‐Gel Precursor

LiCoO₂ xerogel hollow nanofibers were first prepared by co‐electrospinning the sol precursor, and the polycrystalline LiCoO₂ hollow nanofibers were obtained after calcination of the xerogel fibers. The obtained hollow nanofibers made up of 20～30 nm nanocrystals were about 100 nm to several micrometers in outer diameter. The hollow nanofibers were detected by means of SEM, TEM, TG, DSC, FTIR, and XRD techniques.     

SOLVERSTAT: a new utility for multipurpose analysis. An application to the investigation of dioxygenated Co(II) complex formation in dimethylsulfoxide solution

A new utility for multipurpose analysis, SOLVERSTAT, taking advantage of the versatility of spreadsheets is here described. By means of this tool advanced statistical tests have introduced in Microsoft Excel Solver thus allowing regression diagnostic and discrimination between different models. The utility is here applied to the determination, by UV-Vis spectroscopy, of the stability constant for the uptake of molecular dioxygen by the 1:2 complex of Co(II) with N,N′-dimethylethylenediamine (dmen) in the aprotic solvent dimethylsulfoxide (dmso) at 298 K and in a medium adjusted to 0.1 mol dm⁻³ with Et₄NClO₄. The reliability of the model and parameters obtained are discussed and the results compared with those obtained by Dynafit, a different software package, and by independent voltammetric measurements. The validity of SOLVERSTAT has been also examined applying it to the discrimination between different models already discussed in the literature.     

Surface characterization of Co,K/La2O3 catalysts used for the catalytic combustion of diesel soot

Catalysts of Co,K/La₂O₃ have been prepared by wet impregnation. The samples have been calcined at 400°C and 700°C and have been characterized for phase composition using x‐ray diffraction and Fourier transform infrared spectroscopy. The XPS analysis of the samples has been obtained by examination of the O 1s, K 2p, C 1s and La 3d spectral regions. The XPS data are discussed with respect to the calcination temperatures and the soot combustion performed in the spectrometer reaction chamber. Analysis of the XPS data indicates considerable carbonation of the surfaces of all samples, even after burning the soot. The K/La₂O₃ solid presents the highest content of surface carbonated species, showing the highest catalytic activity for soot combustion. Interaction of the catalysts with CO₂ is studied by temperature‐programmed desorption and microbalance experiments. Kinetic studies and surface characterization of the potassium‐containing samples suggest that an appropriate surface potassium concentration is necessary for a synergetic action between potassium and lanthanum. In the cobalt‐containing catalysts calcined at 700°C, an increase is observed in the concentration of the outer‐layer perovskite species when the potassium content increases, following the same tendency observed in the bulk. Such LaCoO₃ species would limit the reaction of lanthanum with CO₂. Copyright © 2003 John Wiley & Sons, Ltd.     

Highly Efficient and Chemoselective Tandem Hydroformylation-Hydrogenation of Alkenes to Alcohols over g-CN Supported Bimetallic Rh and Co Nanoparticles Catalysts

The objective of the tandem hydroformylation-hydrogenation of alkenes to corresponding alcohols was to design an efficient and stable heterogeneous catalyst. To this end, a series of novel heterogeneous graphitic carbon nitride (g-CN) supported bimetallic Rh−Co nanoparticle catalysts (Rh−Co/g-CN) were prepared and subsequently studied for this one-pot two-step reaction. The lamellar structure makes Rh and Co nanoparticles with diameters of <1 nm and 20 nm, respectively, homogeneously deposited on the surface of g-CN layers, exhibit remarkable conversion of styrene (99.9 %) and chemoselectivity for alcohol (87.8 %). More importantly, Co nanoparticles are found to play an important role in the improvement of the chemoselectivity for alcohol due to the formation of catalytic active species [HCo(CO)_y]. Besides the detailed investigation of the catalytic properties of Rh−Co/g-CN under different reaction conditions, the reuse of Rh−Co/g-CN was conducted for five times and no evident decrease in the activity and chemoselectivity was observed. Therefore, we expect that this work could offer an initial insight into g-CN-based heterogeneous catalyst on the tandem hydroformylation-hydrogenation reaction.