On the molecular structure of cycloheptadiene

Molecular mechanics calculations on cycloheptadiene indicate that the molecule has a structure which undergoes a wide pseudorotational motion between two C₁ forms, and a C₁ form, and this structure is in equilibrium with the C₂ form. It is shown that this equilibrium mixture is consistent with all of the available experimental data.     

Interesting interferences in a direct serum creatinine reaction

A spectrophotometric study on a direct picric acid reaction for creatinine in severely jaundiced serums is described. A problem appears to be caused by the oxidation of bilirubin which minimizes rising absorbance when using continuous measurement. Simple examples of interferences with the kinetic mode are shown along with the hitherto unreported interference of the drug, Cephalothin, which also undergoes a picric acid reaction. A procedure in which a delta absorbance is obtained after decolorization of the Jaffé complex by acidification is shown as one available means for obviating the bilirubin effect. However, the theory that Jaffé-reactive interferences do not decolorize with the same acid treatment is not totally applicable when the drug, Cephalothin, is present.     

Preparation and properties of two indium antimony selenides

Crystals of antimony-doped In₂Se₃ were grown by the Bridgeman method. This compound, whose composition is In_1.8Sb_0.2Se₃, appears to be isostructural with In_1.9As_0.1Se₃. The refined unit cell parameters are a = 3.97(1), c = 18.87(1) Å. Orthorhombic crystals of InSbSe₃ were grown from an isothermal melt. The refined unit cell parameters are a = 9.43(1), b = 14.02(5), and c = 3.96(1) Å. These parameters agree with those determined for α-InSbSe₃ by other studies. The observed densities measured by a hydrostatic technique are 5.98(3) g/cm³ for In_1.8Sb_0.2Se₃ and 6.07(2) g/cm³ for InSbSe₃. The room temperature dc resistivity for In_1.8Sb_0.2Se₃ has been found to be 4.4 × 10⁴ Ω-cm, whereas that of InSbSe₃ has been found to be 15.2(1) Ω-cm. A resistivity versus temperature study has beenn carried out for InSbSe₃ between 230 and 400°K. Optical studies indicate that In_1.8Sb_0.2Se₃ is an n-type semiconductor with a band gap of 1.1 eV and InSbSe₃ is a p-type semiconductor with a band gap of 0.92 eV.     

The polysaccharide extracts from the fungi Coprinus comatus and Coprinellus truncorum do exhibit AChE inhibitory activity

The polysaccharide (PSH) extracts from the edible mushroom species Coprinus comatus and Coprinellus truncorum were screened in liquid for their acetylcholinesterase inhibitory (AChE) activity. Both extracts were found to display inhibition of the aforementioned enzyme reaching similar IC₅₀ values of 0.62 ± 0.07 and 0.61 ± 0.03 mg/mL, respectively. According to the means of FTIR spectroscopy, these PSH extracts mostly contained β-glucans. However, the presence of some proteins and polyphenolics as minor ingredients were also detected. Compared with existing literature data for anti-AChE activity of the sugar samples, the findings within this study may be treated as a profound bioactivity. Consequently, this study puts some light on the possible use of the screened macrofungi in the palliative treatment of Alzheimer’s disease.     

Fixed-nuclei and laboratory-frame formalisms for electron scattering by a spherical top,with full incorporation of symmetry

We discuss molecule-frame and laboratory-frame symmetry-adapted formalisms for electron scattering by a spherical top. The molecule-frame formalism is based on the fixed-nuclear-orientation approximation, both for electronically elastic scattering by a vibrationally rigid molecule and also for the more general case where electronic excitation and vibrational degrees of freedom are included. The laboratory-frame formalism is based on the exact symmetries of the problem, which are carefully related to the approximate symmetries of the molecule-frame treatment. We present both the forward and backward transformations between the two representations.     

Plasma Thermal Conversion of Methane to Acetylene

This paper describes a re-examination of a known process for the direct plasma thermal conversion of methane to acetylene. Conversion efficiencies (% methane converted) approached 100% and acetylene yields in the 90–95% range with 2–4% solid carbon production were demonstrated. Specificity for acetylene was higher than in prior work. Improvements in conversion efficiency, yield, and specificity were due primarily to improved injector design and reactant mixing, and minimization of temperature gradients and cold boundary layers. At the 60-kilowatt scale cooling by wall heat transfer appears to be sufficient to quench the product stream and prevent further reaction of acetylene resulting in the formation of heavier hydrocarbon products or solid carbon. Significantly increasing the quenching rate by aerodynamic expansion of the products through a converging–diverging nozzle led to a reduction in the yield of ethylene but had little effect on the yield of other hydrocarbon products. While greater product selectivity for acetylene has been demonstrated, the specific energy consumption per unit mass of acetylene produced was not improved upon. A kinetic model that includes the reaction mechanisms resulting in the formation of acetylene and heavier hydrocarbons, through benzene, is described.     

The hydroazocine route to highly functionalized pyrrolizidines

Studies of the preparation of 1,8-dihydroazocines and transannular cyclization of hydroazocines to produce functionalized pyrrolizidines are described. Results are presented which demonstrate that unsymmetrically substituted acetylenes bearing at least one electron withdrawing groups undergo efficient cycloaddition to 1 - β - styryl - 1,2 - dihydropyridine producing in a regio-selective fashion 3,4 - disubstituted - 1,8 - dihydroazocines. The dihydroazocines generated in this manner can be converted to 1 - formyl - Δ^4,5 - epoxyazocines which undergo interesting rearrangement reactions to form pyrrolizidines when subjected to methoxide deformylation followed by acid treatment. In addition, 1,6,7,8 - tetrahydroazocines can be converted to pyrrolizidines under bromination conditions. The intriguing chemical process which occur under the conditions outlined above are described.     

The pyrolysis of trimethylgermane and trimethylsilane

The number of products and the H₂/CH₄ ratio obtained from the flow pyrolyses of (CH₃)₃GeH and (CH₃)₃SiH were very different. The (CH₃)₃GeH decomposition is consistent with the following mechanism:

Full-size image

The pyrolysis of (CH₃)₃SiH was found to be much more complex, presumably due to the formation of silicon-carbon double bonded intermediates and the (CH₃)₂Si(H)CH₂ radical. We also present data which supports the presence of a H atom chain sequence during this pyrolysis.     

Stability of the FID sensitivity during an analysis in capillary GC

The sensitivity of an FID may change when the carrier gas flow rate changes during a chromatographic run. Sample parts which are eluted at reduced FID sensitivity produce a reduced peak area, hence are discriminated as compared to other components. Sensitivity changes were studied for hydrogen as carrier gas. For the detector tested, differences in the carrier gas flow rates of 1 ml/min shifted the FID sensitivity by 1 to 5% (depending on the fuel gas supply). Thus the stability of the sensitivity is no longer ensured as soon as the carrier gas flow rate is changed manually or by an automatic programmer during an analysis. Sensitivity drifts may also occur during temperature programmed runs with a pressure regulated carrier gas supply since the gas flow through the capillary drops with increasing temperature. Such shifts in the response became noticeable as soon as relatively high carrier gas flow rates combined with long range temperature programmes were used. The typical patterns of such discriminations are shown, closing with a discussion on the possibilities for minimizing such undesired effects.     

Synthesis of (+)-goniothalesdiol and (+)-7-epi-goniothalesdiol

A total synthesis of (+)-goniothalesdiol, a 3,4-dihydroxy-2,5-disubstituted tetrahydrofuran isolated from Goniothalamus borneensis (Annonaceae), and its 7-epimer is reported using oxycarbonylation methodology for construction of polyhydroxylated substituted heterocycles. Diastereoselectivity of addition of organometallic reagents to 2,3-O-isopropylidene-d-threose derivatives using theoretical calculations based on the semiempirical PM5 was studied.