Radiation synthesis of n-vinyl 2-pyrrolidone/acrylonitrile interpenetrating polymer networks and their use in uranium recovery from aqueous systems

Interpenetrating Polymer Networks (IPNs) based on Poly n-vinyl 2-pyrrolidone (PVP) and Acrylonitrile (AN) were prepared by irradiating PVP solutions prepared in AN. PVP/AN mixtures were irradiated by ⁶⁰Co-γ rays at room temperature at a dose rate of 0.5 kGy/hour. IPNs were characterized by using FT-IR and Thermal Analysis techniques. The chelating adsorbents containing amidoxime groups were prepared by the reaction of these IPNs with hydroxylamine in aqueous NaOH solution at 50°C. These amidoxime containing adsorbents were used in adsorption studies for the recovery of uranium from aqueous systems. The adsorption capacity of an IPN with equivolume fraction of PVP and amidoximated PAN was found to be 750mg UO₂²⁺/g dry amidoximated IPN.     

Theoretical studies on the smallest fullerene: from monomer to oligomers and solid States

Hybrid B3LYP and density-functional-based tight-binding (DFTB) computations on the solid-state structures and electronic properties of the C(20) fullerene monomer and oligomers are reported. C(20) cages with C(2), C(2h), C(i), D(3d), and D(2h) symmetries have similar energies and geometries. Release of the very high C(20) strain is, in theory, responsible for the ready oligomerization and the formation of different solid phases. Open [2+2] bonding is preferred both in the oligomers and in the infinite one-dimensional solids; the latter may exhibit metallic character. Two types of three-dimensional solids, the open [2+2] simple cubic and the body-centered cubic (bcc) forms, are proposed. The energy of the latter is lower due to the better oligomer bonding. The open [2+2] simple cubic solid should be a conductor, whereas the bcc solids are insulators. The most stable three-dimensional solid-state structure, an anisotropically compressed form of the bcc solid, has a HOMO-LUMO gap of approximately 2 eV and a larger binding energy than that of the proposed C(36) solid.     

Synthesis and modification of terrylenediimides as high-performance fluorescent dyes

Two new synthetic approaches to terrylenediimides, highly photostable fluorescent dyes, are described. For the first time terrylenediimide has been synthesised in a straightforward procedure that makes large quantities available. The second route includes an efficient cross-coupling reaction followed by a cyclodehydrogenation. Monofunctionalisation of the imide structure allows terrylenediimides now to be coupled with a variety of compounds, for example, by Suzuki cross-coupling, which can lead to an array of terrylenediimides with new functional groups such as hydroxy, amino, or carboxy groups needed to link up with other molecules. The functionalisation in the bay region is used to tune the properties of terrylenediimides and extend the range of applications, for example, by introducing water solubility. These tetrasubstituted terrylenediimides offer, depending on the substituents used, exciting features such as good solubility in common organic solvents, water solubility, or NIR absorption.     

Tautomerism in monothio-β-diketones studied by PMR and quantum chemical calculations

It is shown by proton NMR and quantum chemical PCILO calculations that monothio-β-ketones

in solution exist as different isomers depending on substituents, solvent and temperature. In solvents with low dielectric constants the hydrogen-bridged cis enol form predominates, and is in fast equilibrium (in the NMR scale) with nonchelated trans enol forms down to ?100°C at least. Transition enthalpies are of the order of 7–15 kJ mol^?1. In compounds with R₂ = Me the rotation of the Me -CS group around the neighbouring C-C- bond can be detected and the thermodynamic and kinetic parameters estimated. The reason for the slowing down of this rotation, inferred from the line broadening in NMR, is probably the stabilization of a trans isomer by interaction between the protons of the methyl group and the lone pairs of the oxygen atom. There are no indications for the presence of chelated and non-chelated enethiol isomers from the PMR studies and quantum chemical calculations performed.     

C4/C5烃催化裂解制低碳烯烃的研究进展

从催化剂类型、裂解工艺、催化裂解的影响因素和裂解机理4个方面对国内外C4／C5烃催化裂解制低碳烯烃的研究进行了综述。催化裂解制低碳烯烃催化剂主要采用ZSM-5分子筛系列催化剂，在此基础上发展了酸改性或水热改性高硅ZSM系列分子筛及介孔MCM41分子筛。总结了国内外C4／C5烃的裂解工艺，认为影响催化裂解的主要因素是裂解原料、催化剂类型及工艺条件。目前，裂解机理主要是自由基与碳正离子机理相结合的机理。并简述了本课题组目前有关C4烷烃催化裂解的主要研究进展。     

The structure of 1-formyl-3-phenyl-Δ-pyrazoline in the gas phase (DFT calculations), in solution (NMR) and in the solid state (X-ray crystallography)

The molecular structure of 1-formyl-3-phenyl-Δ²-pyrazoline was determined by X-ray crystallography (triclinic, P-1). The geometry thus obtained was compared with that obtained by DFT calculations. The GIAO method was used to calculate absolute shieldings, which agree conveniently with those measured by ¹³C and ¹⁵N NMR. The title compound appears to be an essentially planar molecule.     

Application of Graphite-Epoxy Composite Electrodes in Differential Pulse Anodic Stripping Voltammetry of Heavy Metals

An analytical study on the use of graphite-epoxy composite (GEC) electrodes for differential pulse anodic stripping voltammetry (DPASV) of heavy metals is presented. This study is accompanied by microscopic observations of the electrode surface before and after the stripping step in comparison to glassy carbon electrode. GEC electrodes show much better accumulation properties and consequently acceptable behaviour which makes them suitable as working electrodes in the DPASV of heavy metals. Lead determination in real water samples in a batch system as well as some preliminary results in a flow-through system are presented. The detection limits in batch measurements were 100ppb for Cd, 10pb for lead and 50ppb for copper. The detection limit for lead in the flow-through system was similar to that in the batch. The results obtained show that these low cost and easy to prepare materials can be of interest in future research concerning stripping techniques of heavy metals and other analytes.     

Elucidation of the structures of 3-alkylthio-, 3-benzylthio-, 2-arylthio- and 2-heteroarylthio-N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamines by one- and two-dimensional NMR spectroscopy

Nucleophilic addition of alkyl- and benzylthiols to benzoquinone diimine (1) gave the corresponding 3-alkylthio- or 3-benzylthio-1,4-phenylenediamines (2-5). However, addition of aryl- or heteroarylthiols to 1 formed 2-arylthio- or 2-heteroarylthio-1,4-phenylenediamines (6-14). The structures of 2-14, obtained in 55-91% yields, were confirmed in CDCl3 or DMSO-d6 solution using 1D (NOE difference, coupled 13C NMR spectra, APT and DEPT) and 2D NMR techniques [DQCOSY, NOESY, HETCOR and heteronuclear multiple bond coherence (HMBC)] that resulted in unambiguous proton and carbon NMR resonance assignments. The substituent-induced 13C NMR chemical shift differences were calculated in 2-14 relative to carbon atoms in the model compound N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamine (DMBPPD) (15) (a reduced form of benzoquinone diimine).