结合空间和光谱信息的高光谱影像端元光谱自动提取

端元光谱提取是高光谱影像混合像元分解的关键。现有的端元提取方法多是仅利用了影像的光谱信息,忽略了像元间的空间相关性。现有研究基础上,提出了一种结合影像空间和光谱信息的高光谱影像端元光谱自动提取方法(integration of spatial-spectral information based endmember extraction,ISEE)。该方法首先进行影像子空间划分以增强影像局部的光谱信息特征,然后通过特征空间投影分析获得影像候选端元,最后依次在影像空间信息约束下和端元光谱信息约束下进行优化,得到最终的影像端元光谱集。仿真高光谱影像和真实高光谱影像的实验结果表明,结合影像空间和光谱信息的ISEE方法是有效的,且比一些常用方法提取的端元光谱更为准确。     

��-Һ�Ӵ�����ȡҺ̬�Ǧ�Ͻ��е���

在自行设计与建造的液态锂铅合金鼓泡器实验系统上,开展了气-液接触法提取液态锂铅合金中的氢。实验结果表明,氦气比氩气更适合作填料塔的载带气;塔温越高,塔出口端氢含量越大;载气流速对出口端氢含量的影响呈锯齿状,无明显规律。实验结果虽然与文献数据有差别,但可以认为采用气-液接触法提取液态锂铅中的氢同位素是可行的,提取效率是随液态锂铅在填料塔中滞留的时间增长而增大的。     

对规范粒子极化矢量的一些讨论

对规范粒子的极化矢量做了较为系统的论述. 讨论内容包括极化矢量的具体形式和性质、求和规则和规范传播子之间的关系以及由其张成的投影算子的性质. 通过若干精选的例子, 进一步演示了计算牵涉规范粒子的过程时采用的基本方法和应当注意事项.     

B+注入HgCdTe外延材料的红外透射光谱分析

运用多层模型和膜系传递矩阵以及非线性二乘法，模拟了B+注入碲镉汞外延材料的红外透射光谱，结果表明B+注入碲镉汞外延材料的红外透射光谱能够很好地理论再现，并由此获得了结区的自由载流子浓度分布、迁移率、面自由载流子浓度以及折射率和消光系数等相关参量，所得结果与微分Hall法测试的结果是一致的.计算结果也表明B+注入HgCdTe导致红外透射率变化的根本原因是注入层的高载流子浓度的等离子效应改变了该层的折射率和消光系数.     

基于灰度投影改进的电子稳像

针对灰度投影算法运用于存在局部运动目标的情况下,稳像效果较差并且可能产生错稳这一问题,在分析灰度投影基本理论的基础上,提出一种改进的灰度投影算法:局部运动物体位置估计方法和像素替代法。利用灰度值的改变和像素替代的方法,把局部运动物体去除,再进行稳像处理。通过实验验证,该方法可以解决图像中存在运动物体时发生的错稳情况。比较改进前与改进后的稳像效果,改进后的PSRN（峰值信噪比）提高了1.35。     

Algorithms of target detection on hyperspectral imagery

With the development of airborne and spaceborne remote sensing from the 1980s, as a new and growing technology, hyperspectral imaging is widely used in different fields, such as military investigation, battlefield information acquisition, environmental monitoring, mineral exploration and public security. Because of the unique characteristic of acquiring spectral and spatial information simultaneously, it brings the hyperspectral detection advantages when dealing with target detection problem under complex conditions. Target detecting models of hyperspectral image are established, including the target subspace model and the probability statistical model. And several algorithms are introduced, which are based on original spectral features, sub-space projection and probability statistical model separately. Comparison shows that if the background includes fault objectives, GLRT is the best algorithm, and its SINR is the largest; on condition of anomaly target detection, LPTD is the best, and have a quite high SINR.     

应用遗传算法结合连续投影算法近红外光谱检测土壤有机质研究

应用遗传算法结合连续投影算法近红外光谱检测土壤有机质研究。采集浙江省文城地区农田土壤样品近红外光谱数据,土壤样品数为394个。为简化模型,采用遗传算法结合连续投影算法挑选出18个特征波长建模,应用偏最小二乘回归建立有机质预测模型,建模集的决定系数为0.81,均方根预测误差为0.22, 剩余预测偏差为2.31,预测集的决定系数为0.83,均方根预测误差为0.20,剩余预测偏差为2.45。研究发现,遗传算法结合连续投影算法在简化模型同时,模型的预测评价指标同采用全谱波长建模并没有明显降低。因此,遗传算法结合连续投影算法挑选的特征波长可以应用于近红外光谱检测土壤有机质含量。     

Comparative analysis of the effects of internal lasing oscillation and external light injection on semiconductor optical amplifier performance

One of the key differences of a semiconductor optical amplifier (SOA) with internal lasing oscillation (ILO) from a SOA with external light injection (ELI) lies in a carrier-sharing mechanism. Since the internal lasing mode shares the same pool of carriers with the signals, the carriers (or photons) withdrawn from the circulating laser mode speed up the gain recovery. On the other hand, the external light injected into the SOA shortens the carrier recovery time through optical pumping without any carrier sharing involved. To find out a better scheme, we have made a comparative investigation on the effects of the ILO and ELI on the SOA performance. It turns out by way of simulation that the ELI scheme provides faster gain recovery, shorter carrier lifetime, and higher saturation power when the external injection power is higher than the internal lasing power. The performance enhancement is not so pronounced with the carrier-sharing mechanism, as the internal lasing mode itself gives rise to severe longitudinal spatial hole burning (LSHB). Nevertheless, the ILO scheme is preferable for linear-amplification applications. We also examine the use of the ELI for low-crosstalk optical amplifiers. It is found that the ELI scheme does not bring in a very strong resonance peak in the crosstalk, which appears in a SOA with ILO due to relaxation oscillations of the lasing mode. In comparison to the ILO in SOAs, the ELI into SOAs is likely to leave more optical gain for multi-channel amplification without any sacrifice on the crosstalk.     

Time- and frequency-domain measurements of carrier lifetimes in GaN epilayers

Results on time-resolved study of GaN photoluminescence (PL) in a power density range from 0.5 mW/cm² under CW excitation by ultraviolet light emitting diode (UV LED) to 1 GW/cm² under pulsed excitation by YAG:Nd laser in the temperature range from 8 to 300 K are presented. Measurements of PL response in the frequency domain by using amplitude-modulated emission of a UV LED as well as time-resolved PL measurements using a streak camera and light-induced transient grating technique have been used in the study. Yellow luminescence (YL) intensity increases with increasing temperature up to 120 K and faster components in YL decay switch to slower components with increasing temperature under UV LED excitation. At low carrier densities, the trapping decreases the carrier lifetime below 250 ps, while the carrier lifetime in the same GaN sample under excitation ensuring saturation of the traps equals 2 ns.     

依据列相关性优化高斯测量矩阵

为了提高信号重建的精度以及稀疏度适用范围,提出了一种新的测量矩阵优化方法,减小测量矩阵和稀疏变换矩阵的相关性。首先,由测量矩阵和稀疏变换矩阵的乘积构造Gram矩阵;根据Gram矩阵的维数,计算互相关函数的下确界即Welch界;其次,由Welch界确定阈值,收缩Gram矩阵中大于阈值的非对角元;然后,由新得的Gram矩阵和稀疏变换矩阵反解出测量矩阵,迭代更新,从而达到减小相关性,优化测量矩阵的目的。实验结果表明：依据Welch界优化测量矩阵,能快速降低压缩感知矩阵相关性的最大值,提高OMP算法的性能,例如在误差率为10_-0.9时,原高斯随机矩阵需要23个观测值,算法优化后只需16个观测值,相对于Elad、Zhao等观测矩阵优化方法,文中提出的算法具有更小的重构误差,性能和稳定性也略有提升。