低能电子非弹性散射阻止本领

电子在固体中的弹性散射用Mot截面描述,提出一个简化的壳层电子激发计算方法将文献[5]中对电子非弹性散射的模拟拓展到重元素,用MonteCarlo方法模拟低能电子在Al、Cu、Au中的散射过程,计算的背散射系数、薄膜透射系数与实验一致.由此,计算得低能电子非弹性散射阻止本领并与Love、Rao-SahibWittry以及Joy的修正Bethe阻止本领作比较分析.     

Critical behaviour of the ferromagnetic Ising model on a triangular lattice

We use a new updated algorithm scheme to investigate the critical behaviour of the two-dimensional ferromagnetic Ising model on a triangular lattice with the nearest neighbour interactions. The transition is examined by generating accurate data for lattices with L= 8, 10, 12, 15, 20, 25, 30, 40 and 50. The updated spin algorithm we employ has the advantages of both a Metropolis algorithm and a single-update method. Our study indicates that the transition is continuous at T_c= 3.6403({2}). A convincing finite-size scaling analysis of the model yields υ=0.9995(21), β / υ = 0.12400({17}), γ / υ = 1.75223(22), γ '/υ=1.7555(22), α/υ= 0.00077(420) (scaling) and α / υ = 0.0010(42) (hyperscaling). The present scheme yields more accurate estimates for all the critical exponents than the Monte Carlo method, and our estimates are shown to be in excellent agreement with their predicted values.     

Reverse Monte Carlo study on structural order in liquid and glassy AlFe alloys

This paper reports that anomalous local order in liquid and glassy AlFeCe alloy has been detected by x-ray diffraction measurements. The addition of the element Ce has a great effect on this local structural order. The element Ce favours interpenetration of the icosahedra by sharing a common face and edges. It argues that frustration between this short-range order and the long-range crystalline order controls the glass-forming ability of these liquids. The obtained results suggest that a system having a stronger tendency to show local icosahedral order should be a better glass-former. This scenario also naturally explains the close relationship between the local icosahedral order in a liquid, glass-forming ability, and the nucleation barrier. Such topological local order has also been analysed directly using the reverse Monte Carlo method. It also estimated the fraction of local ordered and disordered structural units in a glassy AlFeCe alloy.     

Theoretical investigation of synchronous totally asymmetric simple exclusion process on lattices with two consecutive junctions in multiple-input-multiple-output traffic system

In this paper, we study the dynamics of the synchronous totally asymmetric simple exclusion process (TASEP) on lattices with two consecutive junctions in a multiple-input-multiple-output (MIMO) traffic system, which consists of m sub-chains for the input and the output, respectively. In the middle of the system, there are N (nN synchronously increasing, the vertical phase boundary moves toward the right and the horizontal phase boundary moves toward the upside in the phase diagram. The boundary conditions of the system as well as the numbers of input and output determine the no-equilibrium stationary states, stationary-states phases, and phase boundaries. We use the results to compare with computer simulations and find that they are in very good agreement with each other.     

凝并和成核机理下颗粒尺度分布的Monte Carlo求解

颗粒的凝并和成核现象影响其尺度分布,现有的MonteCarlo方法描述颗粒尺度分布的时间演变过程存在若干困难.提出了一种新的多重MonteCarlo(MMC)算法,基于时间驱动,利用加权的虚拟颗粒的思想,在模拟过程中保持虚拟颗粒总数不变和计算区域体积不变.利用该算法对“常凝并核,一阶成核”的情况下颗粒尺度分布的时间演变过程进行了数值求解,所得结果与数值解相符,表明MMC算法具有高且稳定的计算精度.另外,MMC算法由于跟踪比实际颗粒数目少得多的虚拟颗粒而具有较低的计算代价.     

基于梯型密度函数的连续分布随机数近似生成方法

讨论了产生连续分布随机数的近似方法,给出了基于梯型密度函数表示的连续分布随机数近似算法,应用近似算法给出了几种常见类型随机数的实验结果．     

强荧光背景环境中荧光涨落谱--蒙特卡罗模拟研究

荧光涨落谱方法(Fluorescence Fluctuation Spectroscopy)通过分析微小探测区域内的荧光涨落信号,获得粒子亮度、扩散系数以及溶液浓度等信息。利用Monte Carlo模拟方法,研究了溶液中自荧光背景和系统噪声对荧光涨落谱的影响。结果表明,利用双组分光子计数统计方法,可以有效去除低亮度、高浓度背景组分自荧光和均匀分布系统噪声产生的影响。本结果为利用荧光涨落谱方法测量细胞体系复杂环境中的蛋白质相互作用提供帮助。     

环形两嵌段共聚物在软受限条件下自组装行为的Monte Carlo模拟

本文采用Monte Carlo模拟方法考察了环形两嵌段共聚物在软受限条件下的自组装行为。模拟结果表明通过调节嵌段比例,AB环形两嵌段共聚物能够在软受限条件下形成A、B呈交替排列层状相的蛹状粒子,A嵌段呈条带状环绕B相区的椭球粒子以及A嵌段呈块状六角堆积排布的补丁状粒子等多种有序结构。通过考察嵌段间的不相容性和嵌段的疏水性对体系聚集体形貌结构和自组装过程的影响,模拟结果给出了补丁状粒子这一具有特殊有序结构粒子的形成条件,即嵌段的疏水性较弱或不同种嵌段间的不相容性较强的体系中,少组分嵌段A易于在多组分嵌段B形成的连续相中形成具有块状微相结构的补丁状粒子。上述模拟结果能够为人们对环形两嵌段共聚物在纳米材料领域的潜在应用提供理论依据和新思路,使人们对环形两嵌段共聚物在三维软受限中的自组装行为有更进一步的了解。     

基于分层抽样法的可靠性灵敏度分析

提出基于分层抽样的可靠性灵敏度分析方法。该方法将变量空间分割成多个互斥子空间,根据子空间对可靠性灵敏度估计值贡献率的大小来分配子空间的抽取的样本量,这种抽样策略使得更多的样本来源于失效域,从而达到降低估计方差、提高了收敛速度的目的。本文还推导了基于分层抽样法的可靠性灵敏度估计值的方差和变异系数。三个算例显示出分层抽样在单模式、多模式并联、多模式串联结构可靠性灵敏度分析上的可行性和优越性。