加权微分建模的初步研究

加权建模是必要的,微分建模是重要的,把二者结合起来,进行加权微分建模既必要也重要.给出了常用模型的微分建模结果,讨论了加权建模中的计算和权重选择问题,探讨了加权微分建模的思路和方法,并结合典型数据验证了该方法的有效性和稳定性.象加权建模一样,加权微分建模的精度、实用价值等,是和权重确定得合理与否紧密相联;应先进行模拟,以与近期实际值或典型样本相差最小的参数所对应的模型为准.     

微分算子扰动问题的值域研究

本文研究作用在C2周期函数空间上的微分算子u→u″ g(u) ,其中g(u)为连续有界函数.我们将证明上述微分算子的值域限制在周期函数空间的“超曲面”中.     

Darboux Transformation of a Differential-Difference Equation and Its Explicit Solutions

The Darboux transformation of a differential-difference equation associated with a 3 × 3 matrix spectral problem is derived. As an application, explicit soliton solutions of the differential-difference equation are presented.     

关于微分熵的一类强偏差定理

利用关于乘积分布密度的相对熵和相对熵率的概念,建立了相依连续型随机变量序列关于参考微分熵的一类强偏差定理,证明中给出了将Laplace变换应用于微分熵强偏差定理的研究的一种途径．     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

活动标形及其在点啮合齿轮传动误差分析中的应用

活动标形法的论述首推苏步青译，佐佐木重夫著《微分几何学》，还有的著作从外微分形式引入活动标形,本文论证取曲面的正交曲率网为参数网时，曲面论的基本公式就是活动标形的微分形式，并用其分析了点啮合齿轮传动误差．     

Deformation Morphology underneath the Vickers Indent in Bulk Metallic Glasses

Plastic deformation behaviour of Zr52.5Al10Ni10Cu15Be12.5 and Mg65Cu25Gd10 bulk metallic glasses (BMGs) is studied by using the depth-sensing nanoindentation and microindentation. The subsurface plastic deformation zone of the BMGs is investigated using the bonded interface technique. Both the BMGs exhibit the serrated flow depending on the loading rate in the loading process of indentation. Slow indentation rates promote more conspicuous serrations, and rapid indentations suppress the serrated flow. Mg-based BMG shows a much higher critical loading rate for the disappearance of the serration than that in Zr-based BMG. The significant difference in the shear band pattern in the subsurface plastic deformation zone is responsible for the different deformation behaviour between the two BMGs. Increase of the loading rate can lead to the increase of the density of shear bands. However, there is no distinct change in the character of shear bands at the loading rate of as high as1000 nm/s.     

每个算子都是两个强不可约算子的和

本文证明了可分无穷维 Hilbert空间上每个有界线性算子均可写成两个强不可约算子之和 .这回答了文献 [9]中提出一个公开问题     

A GENERALIZED TRANSVERSALITY IN GLOBAL ANALYSIS

E. Zeidler in [10] mentions that transversality is certainly one of the most important concepts of modern mathematics, which provided an answer to the question: when is the preimage of a manifold a manifold. This is the celebrated transversality theorem, which has been applied widely to differential topology and dynamic system in [1,2] and [3].     

由Schr?dinger算子定义的Riesz变换的Lp估计

本文主要讨论了当非负位势 V(x)属于某逆Holder类时,由一致椭圆算子L=-div(A(x))+V(x)所定义的 Riesz变换在 L^p空间的有界性。