Predictive models to describe VLE in ternary mixtures water + ethanol + congener for wine distillation

The modeling of liquid–vapor equilibrium in ternary mixtures that include substances found in alcoholic distillation processes of wine and musts is analyzed. In particular, vapor–liquid equilibrium in ternary mixtures containing water + ethanol + cogener has been modeled using parameters obtained from binary mixture data only. The congeners are substances that although present in very low concentrations, of the order of part per million, 10⁻⁶ to 10⁻⁴ mg/L, are important enological parameters [1] and [2]. In this work two predictive models, the PSRK equation of state and the UNIFAC liquid phase model and two semipredictive activity coefficient models: NRTL and UNIQUAC have been used. The results given by these different models have been compared with literature data and conclusions about the accuracy of the models studied are drawn, recommending the best models for correlating and predicting the phase equilibrium in this type of mixtures.     

Chloride distribution coefficient on strongly basic anion-exchange resin: Dependence on co-ion in alkali fluoride solutions

Summary The dependence of the chloride distribution coefficient on the co-ion of solutions of different alkali fluorides, MF, up to 11M is tested on the strongly basic anion-exchange resin AG1-X10. Under the same experimental conditions the distribution coefficient decreases in the following order for M⁺: Na⁺>K⁺>Rb⁺>Cs⁺. This can be explained by the different co-ion-chloride interactions. The consequence of this interaction for a chromatographic separation of chloride is shown with 5M KF and CsF solutions, used as eluants. Depending on the fluoride concentration, the distribution coefficient passes through a minimum value to increase again at higher electrolyte concentration. The non-exchange electrolyte in the resin phase is responsible for this effect. In addition, the bromide and the iodide distribution coefficients up to 10M KF solutions are determined. One results is that the selectivity coefficient between halide ions increases at higher electrolyte concentrations.     

Phase transitions in ternary caesium lead bromide

Phase transitions in ternary caesium lead bromide (CsPbBr₃) were studied by means of DSC, TMA and high temperature X-ray diffraction. The samples were prepared from the solution by water evaporation and from the melt. on the DSC curves as well as on the temperature dependence of the lattice constants of CsPbBr₃ only two effects were found belonging to the earlier published phase transitions at 88 and 130°C and no further effects. Linear thermal expansion coefficient α of individual CsPbBr₃ modifications were calculated from both TMA and high temperature X-ray diffraction. The structural parameters of the room temperature orthorhombic phase were refined and the results are presented. CsPbBr₃ prepared from the solution contained about 10% of CsPb₂Br₅ and so the DSC curve of pure CsPb₂Br₅ was also measured and an effect at a temperature of 68.5°C was found. This revised version was published online in July 2006 with corrections to the Cover Date.     

Prediction of soil organic carbon partition coefficients by soil column liquid chromatography

To avoid the limitation of the widely used prediction methods of soil organic carbon partition coefficients (KOC) from hydrophobic parameters, e.g., the n-octanol/water partition coefficients (KOW) and the reversed phase high performance liquid chromatographic (RP-HPLC) retention factors, the soil column liquid chromatographic (SCLC) method was developed for KOC prediction. The real soils were used as the packing materials of RP-HPLC columns, and the correlations between the retention factors of organic compounds on soil columns (ksoil) and KOC measured by batch equilibrium method were studied. Good correlations were achieved between ksoil and KOC for three types of soils with different properties. All the square of the correlation coefficients (R2) of the linear regression between log ksoil and log KOC were higher than 0.89 with standard deviations of less than 0.21. In addition, the prediction of KOC from KOW and the RP-HPLC retention factors on cyanopropyl (CN) stationary phase (kCN) was comparatively evaluated for the three types of soils. The results show that the prediction of KOC from kCN and KOW is only applicable to some specific types of soils. The results obtained in the present study proved that the SCLC method is appropriate for the KOC prediction for different types of soils, however the applicability of using hydrophobic parameters to predict KOC largely depends on the properties of soil concerned.     

Polymeric positive-temperature-coefficient materials: dynamic curing effect

The object of this work was to prepare high-density polyethylene (HDPE)/ethylene–propylene–diene terpolymer (EPDM)/conductive carbon black (CB) composites by dynamic curing and to characterize the positive-temperature-coefficient (PTC) performances of the composites.EPDM and dicumyl peroxide were preblended in a research mill. The roll-milled strands were blended with HDPE and CB in a Haake mixer. The sheet resistivity and morphology of the HDPE/EPDM/CB composites with or without the dynamic curing process were investigated. It was concluded that the dynamically cured blends exhibit better PTC performance than the simple blends without dynamic curing. The effects of shear intensity and dicumyl peroxide content during the dynamic curing process were discussed for the PTC characteristics of the HDPE/EPDM/CB composites.     

Grain boundary diffusion coefficients in gold–nickel thin films

Polycrystalline gold–nickel thin films are deposited on silicon (111) wafers by evaporation in a vacuum of 2 × 10^?6 mbar. Concentration profiles of heat‐treated specimens are obtained by Auger electron depth profiling. The heat treatments are carried out in a vacuum furnace of 4 × 10^?6 mbar in the temperature interval 473–773 K. The grain boundary diffusion coefficient is determined, using a modified Wipple model, to be (3 × 10^?4 cm² s^?1) exp (?0.94 eV kT^?1). It is concluded that interdiffusion in the investigated system is characterized by type B kinetics, and that grain boundary diffusion plays a dominant role in the mass transport process of such films. Copyright © 2003 John Wiley & Sons, Ltd.     

Investigation of the Electrochemical Reduction of Benzophenone in Aprotic Solvents Using the Method of Cyclic Voltammetry

The reduction of benzophenone (Bzph) in 3-pentanone (PEN), acetone (ACE), N,N-dimethylacetamide (DMA), N,N-dimethylformamide (DMF), tetrahydrofuran (THF), acetonitrile (ACN) and dimethyl sulfoxide (DMSO) with n-tetrabutylammonium hexafluorophosphate (TBAPF₆) as background electrolyte was studied using the technique of cyclic voltammetry at the temperature of 263.15 K. The half-wave potentials (E _1/2) were extracted. The reduction of Bzph occurs in two successive one-electron steps to produce first the free radical anion Bzph⁻ and then the dianion Bzph²⁻. The results indicated that the radical anion Bzph⁻ is reoxidized to Bzph in all investigated solvent media whereas the dianion Bzph²⁻ is reoxidized to Bzph⁻ only in THF. The heterogeneous electron-transfer rate constants (k _s ) were evaluated by employing the electrochemical rate equation proposed by Nicholson. The rate of electron transfer for the Bzph/Bzph⁻ couple was found to be relatively slow in all investigated solvent media. Consequently, the electron-transfer processes can be recognized as quasi-reversible. The diffusion coefficients (D) of Bzph in the investigated solvent media have been calculated using the modified Randles-Sevcik equation. The effect of the physical and chemical properties of the solvent medium on the electrochemical behavior of Bzph has been examined.     

The kinetics of vapor-phase nitration of cellulose 2. Nitration with nitric acid under static conditions

The regularities of vapor-phase nitration of cellulose with HNO₃ under conditions of natural convection and hindered heat removal in the absence of air were studied using the nonisothermal kinetic method. It was established that the nitration rate at the depth of conversion of 0.08 to 0.7 is described by the kinetic law d/dt =k ₁ p/(1+), wherek ₁ = 10^4.49±0.6 exp(–A/RT) s^–1 atm^–1, = 10^{–35.5±15.7}exp(B/RT),A = 36.6±3.8 kl mol^–1, andB = 203±88 kJ mol^–1. The diffusion mechanism of vapor-phase nitration of cellulose, which explains the high value of activation energies, is discussed. The effective diffusion coefficient of HNO₃ in cellulose at 25 °3.7 · 10^–7 cm² s^–1) and the activation energy of diffusion (38.3±4.2 kJ mol^–1) were estimated.For Part 1, see Ref. l.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1981–1985, August, 1996.     

Hydrophobic Molecular Similarity from MST Fractional Contributions to the Octanol/water Partition Coefficient

Summary The use of a recently proposed hydrophobic similarity index for the alignment of molecules and the prediction of their differences in biological activity is described. The hydrophobic similarity index exploits atomic contributions to the octanol/water transfer free energy, which are evaluated by means of the fractional partitioning scheme developed within the framework of the Miertus-Scrocco-Tomasi continuum model. Those contributions are used to define global and local measures of hydrophobic similarity. The suitability of this computational strategy is examined for two series of compounds (ACAT inhibitors and 5-HT₃ receptor agonists), which are aligned to maximize the global hydrophobic similarity using a Monte Carlo-simulated protocol. Indeed, the concept of local hydrophobic similarity is used to explore structure–activity relationships in a series of COX-2 inhibitors. Inspection of the 3D distribution of hydrophobic/hydrophilic contributions in the aligned molecules is valuable to identify regions of very similar hydrophobicity, which can define pharmacophoric recognition patterns. Moreover, low similar regions permit to identify structural elements that modulate the differences in activity between molecules. Finally, the quantitative relationships found between the pharmacological activity and the hydrophobic similarity index points out that not only the global hydrophobicity, but its 3D distribution, is important to gain insight into the activity of molecules. J.M.M. and S.P. have contributed equally to this study.