液相体系中工艺条件对纳米碳酸钙晶形及聚集态的影响

对液相中形成纳米碳酸钙所加的分散剂和晶型控制剂，温度、浓度和搅拌速度等对晶形及聚集态的影响作了初步的研究，在反应温度8～15℃，反应物浓度0.1～0.4mol/L，搅拌速度3～20r/s，反应物加料时间4～12min的工艺条件下，可制备出粒径约50nm的高分散纳米碳酸钙，所控条件和相应的产品结果较令人满意。     

Incorporation of smooth spherical bodies in the Lattice Boltzmann method

A method to simulate bodies suspended in a Lattice Boltzmann solvent is proposed. It is based on a generalized reaction force that enforces no-slip boundary conditions at the fluid–body interface as the limiting case of an iterative procedure. A smooth version of the Heaviside function allows to treat spherical particles of arbitrary size and produces smooth hydrodynamic forces as particles move in the continuum. Numerical tests demonstrate the accuracy of the method in reproducing the hydrodynamic field around a single particle and the fluid-mediated forces between pairs of particles. The drag force experienced by a particle moving in a straight channel and at various Reynolds numbers is studied as a non-trivial testcase.     

量子系统保结构计算新进展

本文主要介绍量子系统保结构计算最新进展情况,分以下几部分内容:哈密顿系统的辛算法、适合于量子系统的哈密顿量显含时间的辛算法、A2B模型分子和双原子分子系统的经典轨迹辛算法计算、双原子分子CO在激光场中的经典轨迹的辛算法计算及其振动和解离、定态Schr dinger方程的辛形式及求解定态Schr dinger方程本征值问题的辛 打靶法、含时Schr dinger方程的保结构算法及其在激光原子物理中的应用、伪分立态模型、强激光与原子相互作用的渐近边界条件、"非齐线性正则方程"的辛算法及其在计算强激光场中一维原子的多光子电离和高次谐波发射中的应用以及Heisenberg方程的保结构计算等等。     

The apparent state of droplets on a rough surface

The factors influencing the state and wetting transition of droplets on a rough surface are both complex and obscure. The change in wetting is directly reflected by changes under the contact condition of the droplets with the surface. The recent study about the wettability of the superhydrophobic surface under the condensing condition arouses the new understanding about the apparent state of droplets on a rough surface. In this work, to validate the existence of droplets in an intermediate state, a microscale pillar topological polydimethylsiloxane (PDMS) surface was manufactured and its wettability under various conditions was studied. According to the experimental data, it is proposed that the wetting state of a rough surface may be embodied using the contact area ratio of a solid/liquid/gas droplet with the projective plane. A general calculation model for the apparent contact angle of droplets is given and expressed diagrammatically. It is found that the measured apparent contact angles of droplets at different states on the surface falls within the range predicted by our proposed equation. Supported by the National Natural Science Foundation of China (Grant No. 50606025)     

Simplified sonochemical preparation of titania embedded with selected metals for purification of benzene and toluene

Titania (TiO₂) photocatalysts, each embedded with one of six metals (Ag, Ce, Co, Fe, Mg, and Mn), were prepared using a simplified ultrasonic process. The characteristics of the prepared metal-embedded TiO₂ (metal–TiO₂) were determined using transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, photoluminescence emission spectroscopy, UV–visible spectroscopy, and nitrogen adsorption–desorption. Except for Co–TiO₂, the metal–TiO₂ photocatalysts showed improved performance for the decomposition of gaseous benzene and toluene, which are two of the most problematic indoor air pollutants that can cause a variety of adverse health symptoms, under daylight lamp irradiation. Photocatalytic activity was greatest for the Mg–TiO₂ sample, followed by, in order, the Ag–TiO₂, Ce–TiO₂, Fe–TiO₂, Mn–TiO₂, unmodified TiO₂, and Co–TiO₂ samples. Although Mg–TiO₂ showed the least redshift in its light absorption and the highest electron–hole recombination rate among the metal–TiO₂ photocatalysts, it yielded the highest photocatalytic activity, likely because of its increased adsorption capacity and anatase composition. The degradation of benzene and toluene over Mg–TiO₂ improved as ultrasound treatment amplitude increased from 20 to 37 μm, then decreased gradually as amplitude was further increased to 49 μm. Degradation efficiency also improved as ultrasound operation time increased from 30 to 60 min, then decreased gradually as amplitude was further increased to 90 min. Overall, this process could be utilized to prepare metal–TiO₂ photocatalysts with improved performance for the decomposition of gas phase pollutants under daylight lamp irradiation.     

1.3 GHz单cell超导射频腔等离子体清洗放电研究(英文)

场致发射限制超导射频腔加速梯度增长。为了减少超导射频腔场致发射,在室温条件下,设计搭建了1.3GHz单cell超导射频腔等离子体清洗实验装置,开展等离子体清洗放电研究。使用CST软件模拟腔中的电磁场分布并且优化外部品质因数得到合适的放电条件。随着压强、前向功率和含氧量的变化,实验探讨了Ar/Ar-O₂放电的物理特征和电子激发温度的变化趋势。残余气体分析结果表明,Ar/O₂等离子体清洗能够消除腔体内表面的碳化物。Field emission limits the accelerating gradient increase in SRF cavities. In order to reduce field emission of SRF cavities, the plasma processing experimental setup of a 1.3 GHz single-cell SRF cavity is designed and built to carry out plasma processing discharge research at room temperature. The electromagnetic field distribution is simulated and the external quality factor is optimized to provide a suitable discharge condition using CST software. It is explored that the physical property of Ar/Ar-O₂ discharge and the variation trend of electron excitation temperature with the changes of pressure, forward power and O₂ content in experiment. The result of residual gas analysis indicates that Ar/O₂ plasma processing can eliminate the carbide of the inner surface of cavity.     

An efficient calculation algorithm for focusing by plane ultrasonic transducers

In the present paper, we simulate focused wave fields generated by a system of plane transducers used in an immersion ultrasonic technique. The ultrasonic beam penetrates into the elastic medium through the fluid-solid boundary. A real-time computer algorithm is proposed to calculate stress components in the solid medium. It is shown that a good focusing wave structure can be provided by a pair of plane rectangular transducers, inclined with respect to each other and to the beam acoustic axis.     

A basic study on the sound field analysis of periodic structures by boundary integral equation method

This study deals with the development of the approximate method to analyze the sound field around equally spaced finite obstacles, using the periodic boundary condition. First, on the assumption that the equally spaced finite obstacles are the periodically arranged obstacles, the sound field is analyzed by boundary integral equation method with a Green’s function which satisfies the periodic boundary condition. Furthermore, by comparing these results and the exact solution by using the fundamental solution as Green’s function, the validity of the approximate method is also investigated. Next, in order to evaluate the applicability of the approximate method, the simple formula using some parameters, i.e., the frequency, the period, and the number of obstacles, etc., is proposed. The results of the sound field analysis applied the formula are presented.     

利用甲醇氧化烟气中NO的实验研究

对利用甲醇氧化烟气中NO的反应开展了系统的实验研究。研究了反应时间、反应温度、甲醇用量比例、烟气中O2、SO2及夹带的固体颗粒对NO氧化率的影响。结果表明,在一定的条件下,甲醇能够氧化烟气中的NO;NO氧化率受反应时间和反应温度的综合影响,随着反应时间的增加,有效反应温度区域向低温方向移动,最大NO氧化率降低;随着甲醇用量比例的增加, NO氧化率增加;O2浓度增加可促进NO氧化;烟气中的SO2对反应有催化作用,可显著提高NO氧化率;烟气中固体颗粒的存在阻碍了自由基反应的进行,显著降低了NO的氧化率。