EPM-g-GMA接枝率的测定及其增韧PBT的力学性能和形态结构研究

在同向双螺杆挤出机中通过熔融接枝反应制备了EPM g GMA ,将其与PBT在转矩流变仪中熔融共混可以获得增韧的PBT工程塑料 .实验中EPM g GMA接枝率的测定采用红外工作曲线法 ,选用CCl4 做溶剂以避免溶剂对样品吸收峰的干扰 .随着EPM g GMA接枝率的增加 ,PBT EPM g GMA的缺口冲击强度相应提高 ,共混物中EPM g GMA的粒径尺寸减小 ,当EPM g GMA的接枝率为 4 7mL 1 0 0gEPM时 ,EPM g GMA的粒径尺寸可达 0 5 μm ,PBT EPM g GMA的缺口冲击强度达到 5 1 6kJ m2 ,是纯PBT的 3 1倍     

1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐的合成

以1－甲基吡咯为原料，通过酰化、硝化、酯化、还原、成盐等五步反应，合 成得到1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐，总产率20％左右。该法具有 原料便宜易得、操作简单、产物易于分离提纯等优点，有利于该化合物的大量制备 和应用。     

Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes

The most important variable affecting the yield in the coupling reactions of polymeric organolithium compounds with chlorosilane compounds has been investigated through size-exclusion chromatographic (SEC) analysis. The coupling reaction of poly(styryl)lithium with dichlorodimethylsilane as a silane-coupling agent provided 44 wt % of the coupling yield. The coupling yield, depending on the chain end reactivity of active polymers, was not greatly affected. The addition of a Lewis base such as N,N,N′,N′-tetramethylethylenediamine (TMEDA) even after complete polymerization of the dienes in hydrocarbon seems to affect the coupling reaction, resulting in decreasing the yield. The 1,2- or 3,4-enchain contents in the polydiene backbones affected the reduction of the linking efficiency in the coupling of the poly(dienyl)lithiums with chlorosilanes as the linking agent. The linking yields of the active polymers including over 75 mol % of 1,2- or 3,4-enchainment on the polydiene segment were below 20 wt %. The linking yields exhibited a dependence not only on the steric requirement of the chain end, but also the microstructure of the polydiene segment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1743–1753, 1998     

次级键与晶体中锑(III)螯合物配位多面体研究

考虑立体活性孤对电子附近次级键配位原子的贡献,对文献报道的三十个氨基多羧酸锑(III)螯合物的晶体结构中配位多面体描述进行了全面的修正.配位多面体的几何构型指定采用了单位球内截多面体的两面角判据及其相关的ANVPDA程序.所有配位多面体几何构型的修正均得到了键价计算的有力支持.     

Thermal stability and bond dissociation energy of fluorinated polymers: A critical evaluation

Intrinsic bond dissociation energies (BDEs) of selected fluorinated polymers are critically evaluated. Two distinctive approaches were followed. In the first one, according to Wu and Rodgers [E.-C. Wu, A.S. Rodgers, J. Am. Chem. Soc. 98 (1976) 6112-6115], starting from the gas-phase enthalpy of polymerization we obtained the polymer backbone BDE through appropriate thermodynamic cycles. Revised experimental results indicate that the CC BDEs of all the polymers taken into account fall within a limited energy interval, comparable to the average experimental uncertainty. Central to the second methodology adopted, is a model compound approach. Thanks to the large number of reliable thermodynamic data available in the scientific literature and to simple end-capping rules, C₂ molecules were chosen as suitable models for infinite linear polymers and alternating copolymers between ethylene and fluorinated olefins. For partially fluorinated polymers, like polyvinylidene fluoride (PVDF), alternating ethylene-tertrafluoroethylene (ETFE) and alternating ethylene-chlorotrifluoroethylene (ECTFE), the weight loss due to HF and HCl evolution during heating experiments was successfully related to the threshold energy E_o(HX) for 1,2-elimination from chemically activated hydrofluoro and hydrofluorochlorocarbons according to the modified Rice-Rampsberger-Kassel (RRKM) unimolecular theory.     

Organometallic alkane CH activation

The title topic is reviewed with emphasis on catalysis and on recent advances. Alkane σ complexes, Shilov chemistry and oxidative addition routes are covered. Attention is also given to σ bond metathesis, surface-bound organometallics and CH activation involving carbene complexes. Closely related reactions of non-alkane substrates such as the Murai reaction are also discussed.     

吖啶类衍生物的荧光性质

用比较法测得23种啶类衍生物的荧光量子效率（Φf)，以评估这些化合物的荧光性质，结果表明，N－烃基吖啶酮类化合物的荧光量子效率要比9－取代苯基吖啶类和9－取代苯亚甲基－10－甲基－9，10－二氢吖啶类化合物的荧光量子效率大，在非极性溶剂中，9－聚代苯亚甲基－9，10二氢吖啶分子内的强吸电子基NO2增强荧光量子效率，强推电子基OCH3降低荧光量子效率，这些测量结果与取代基的电子作用经验规律不相符，这种现象可以用分子内电荷转移理论进行解释。     

Tuning the Solid‐State Optical Properties of Tetracene Derivatives by Modification of the Alkyl Side‐Chains: Crystallochromy and the Highest Fluorescence Quantum Yield in Acenes Larger than Anthracene

In the solution state, there were no notable differences between the optical properties of a range of alkyl‐substituted tetracenes. However, in the solid state, their photophysical properties changed with respect to the length, shape, number, and substitution pattern of the alkyl side chains, as well as the distribution of two regioisomers. Remarkably, in the solid state, 1,4,7,10‐tetraisopropyltetracene exhibited the highest reported fluorescence quantum yield of any tetracene derivative (0.90). The changes in the optical characteristics of these tetracenes according to the arrangement of the tetracene rings and the color‐change mechanism in the solid state are discussed. Moreover, the world record in solid‐state fluorescence efficiency in acenes larger than anthracene is described. DOI 10.1002/tcr.201200003     

Structure and photochromism of 2-(<Emphasis Type="Italic">N</Emphasis>-acyl-<Emphasis Type="Italic">N</Emphasis>-arylaminomethylene)benzo[<Emphasis Type="Italic">b</Emphasis>]thiophen-3(2<Emphasis Type="Italic">H</Emphasis>)-ones

It was shown by electron absorption spectroscopy and X-ray diffraction analysis that steric strains in photochromic 2-(N-acyl-N-arylaminomethylene) benzo[b]thiophen-3(2H)-one molecules ortho-substituted in the N-phenyl ring increase the quantum yield of the N→O photoinduced rearrangement in accord with an increase in the steric constant of the ortho-substituent.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2151–2155, October, 2004.     

Thermal behaviour of ethynyl and ethenyl terminated imide resins

A series of ethynyl and ethenyl end-capped imide resins were synthesised by the reaction of 9,9-bis(4-aminophenyl) fluorene (BAF) with pyromellitic dianhydride (PMDA)3/3′, 4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA)/2,2-bis(3,4-dicarboxy phenyl) hexafluoropropane dianhydride (6F) and 3-ethynyl aniline/maleic anhydride. Structural characterisation was done by infra red and elemental analysis. Thermal characterisation was done by differential scanning calorimetry and thermogravimetric analysis. The decomposition temperatures of cured resins were above 200°C in nitrogen atmosphere. Char yield at 800°C ranged from 59–65.5%.