Tokamak中自举电流的剖面准直性

利用Harris模型,通过求解等离子体平衡方程,计算俘获粒子份额,分别对常规剪切和中心负剪切下tokamak中的自举电流的大小和剖面准直性进行了计算和分析.自举电流分布与等离子体平衡电流分布之间的剖面准直性可以通过调整等离子体的密度、温度和电流分布参数,以及描述等离子体形状的拉长度k和三角变形因子d来获得.中心负剪切位形有利于自举电流产生,并有好的剖面准直性.通过计算比较,分别在常规剪切位形下和中心负剪切位形下获得了一组优化的等离子体参数,在这组参数下,自举电流有较大的份额和好的剖面准直性 关键词： tokamak 自举电流 剖面准直性     

中国银行间拆借利率扩散模型的极大拟似然估计

本文用极大拟似然估计法估计了中国银行间市场七天拆借利率扩散模型的参数。并用自助法对众多不同的模型进行了广义拟似然比检验。结论表明:中国货币市场利率具有均值回复效应:利率敏感系数γ值为1.421265,对利率水平具有较高敏感性。     

Continuous peeling extrusion of SEBS block copolymers

During continuous peeling, a central polymer rod free of visible defects was continuously extruded while being peeled at the die exit. Continuous peeling can occur at flow rates orders of magnitude higher than those at which initial surface cracking is observed. Thus, if continuous peeling can be controlled it may have potential industrial applications. The aim of this work was to study how different extrusion parameters (temperature, flow rate, die length and diameter) affect the presence of continuous peeling. The melt exiting the die has been filmed to link physical measurements and observations and to determine whether or not continuous peeling is present. Different criteria have been considered to represent the extrusion conditions under which continuous peeling may occur. Surface tension criteria can be used to try to predict the appearance and disappearance of continuous peeling. A correlation formula is also proposed for the rod diameter in terms of surface tension. Our results show that the ratio of the rod diameter to the die diameter is approximately 25% greater in the case of short-orifice dies (L/D ≈ 0) than for long capillaries (L/D ≈ 10). The correlations obtained allow analysis and discussion of flow regimes for possible applications.     

牛血清白蛋白对Pluronic聚合物胶团形成的影响研究

用吡啶作为荧光探针研究了嵌段共聚物PluronicF108胶团形成以及牛血清白蛋白(BSA)对嵌段共聚物胶团形成的影响。研究表明,BSA阻碍嵌段共聚物的胶团形成,BSA与嵌段共聚物疏水链段的疏水相互作用是其阻碍嵌段共聚物胶团形成的主要原因。     

Cyclic BSEC of block size 3

Balanced sampling plans excluding contiguous units (or BSEC) were first introduced by Hedayat, Rao and Stufken in 1988. In this note, we discuss constructions of these designs having cyclic automorphisms. We use Langford sequences to construct all possible cyclic BSEC (or CBSEC) with block size 3 and λ = 1,2, which establishes the necessary and sufficient conditions for such designs. Some constructions of the balanced sampling plan avoiding adjacent units, a generalization of BSEC, are also given for fixed λ.     

Size dependence of self-diffusion in the hard-square lattice gas

A striking size dependence of the mean-square displacement of diffusing particles in the two-dimensional lattice gas of hard squares has been observed by Monte Carlo simulation. It is shown that the size effect is due to the formation of a stable cage structure in small lattices when the particle concentration is high. The formation of cages is governed by a new type of percolation problem related to bootstrap percolation.     

EAST�ŵ����ֵģ�⼰����������

用TSC程序模拟了EAST装置等离子体放电的全过程。模拟中考虑了自举电流，并加入了离子回旋共振加热ICRH和快波电流驱动FWCD，得到了中心电子温度4.5keV、中心离子温度3.8keV、中心电子密度1.2×1020m–3的D形截面的等离子体。根据模拟结果对EAST装置进行了伏秒数分析，并研究了不同等离子体电流上升时间、有效电荷数Zeff对放电的影响。     

On the connectedness of partially balanced block designs

The necessary and sufficient conditions for m-associate partially balanced block (PBB) designs to be connected are given. This generalizes the criterion for m-associate partially balanced incomplete block (PBIB) designs, which has originally been established by Ogawa, Ikeda and Kageyama (1984, Proceedings of the Seminar on Combinatorics and Applications, 248–255, Statistical Publishing Society, Calcutta).This work was partially supported by the Polish Academy of Sciences Grant No. MR I.1-2/2.     

用稳定自由基聚合及光引发聚合制备嵌段共聚物

介绍了稳定自由基聚合的反应原理、引发剂设计，以及用稳定自由基聚合制备嵌段共聚物的几种方法：连续加料法、双官能团引发剂法和一步法。对于光引发聚合的原理及硫自由基的稳定性对聚合反应的影响也进行了讨论。     

PEG-PLA嵌段共聚物的合成及~(13)C NMR对平均链段长度的测定

本文报道聚乙二醇(PEG)在辛酸亚锡存在下与丙交酯(LA)反应合成PEG-PLA嵌段共聚物,用~(13)C NMR测定了共聚物的结构,估算了平均链段长度.实验结果表明,L_(PEG)在反应过程中保持不变,而L_(PLA)随反应时间和LA在原料配比中含量的增加而增加,呈逐步聚合反应特点.对聚合反应机理作了推测.