Construction of Co2NiO4@MnCo2O4.5 nanoparticles with multiple hetero-interfaces for enhanced electromagnetic wave absorption

Nanocomposites with heterogeneous structures and magneto-electric synergistic losses have broad prospects for improving electromagnetic wave (EMW) absorption performance. In this study, we synthesized Co₂NiO₄@MnCo₂O_4.5 nanoparticles with abundant hetero-interfaces and multiple magneto-electric loss mechanisms by a facile hydrothermal method. The excess 0.5 oxygen atoms in MnCo₂O_4.5 produce more vacancies and contribute to the enhancement of electrical conductivity. Sequential nanoneedle clusters facilitate multiple reflections and absorption of EMW in the materials, which are accompanied by an abundance of heterogeneous interfaces to improve the dielectric loss. The Co₂NiO₄@MnCo₂O_4.5 composites showed a minimum reflection loss (RL_min) of −30.01 dB and a superior effective absorption bandwidth (EAB) of 6.12 GHz (11.88 GHz–18 GHz) at a thickness of 2.00 mm. Computer Simulation Technology (CST) revealed that the obtained particles show very low radar cross-section (RCS) values and almost full coverage angles. The maximum reduction of RCS at vertical incidence reaches 19.98 dB m². The Co₂NiO₄@MnCo₂O_4.5 nanoparticles exhibit outstanding radar attenuation properties, which can effectively inhibit the reflection and scattering of EMW. Therefore, the prepared Co₂NiO₄@MnCo₂O_4.5 absorbers have great application potential in the field of EMW absorption.     

测线调查样本密度推定中核函数选择的几点注记

对于半正态探知函数,使用两个最佳带幅宽和六个属于相同的函数族、不同的核函数(其中3个是经常被使用、著名的核函数,另外3个是我们作成的核函数)来进行密度推定,通过计算机数值模拟产生测线调查样本;用统计量RRMSE和RB对密度推定值进行评价,来验证核函数的优劣。     

光电经纬仪机电一体化耦合特性

区别于传统刚体控制模型,将结构动态设计方法与控制理论相结合,构建了光电经纬仪的柔性机电耦合控制模型,分析了该模型的结构基频、阻尼比等机械因素与控制带宽的耦合关系,并提出了光电经纬仪动态量化设计准则.实验表明:光电经纬仪结构谐振频率ω_n应尽可能地远大于系统谐振频率ω_r,至少满足ω_n≥3ω_r.该方法有效可行,可解决高精度大型经纬仪机电谐振问题,为设计快速响应、高跟踪精度的光电经纬仪提供了工程依据.     

Nonlinear blood oxygen level-dependent responses for transient activations and deactivations in V1 - insights into the hemodynamic response function with the balloon model

We report studies of the nonlinear nature of blood oxygen level-dependent (BOLD) responses to short transient deactivations in human visual cortex. Both functional magnetic resonance imaging (fMRI) and near-infrared spectroscopy (NIRS) have been used to compare and contrast the hemodynamic response functions (HRFs) associated with transient activation and deactivation in primary visual cortex. We show that signal decreases for short duration deactivations are smaller than corresponding signal increases in activation studies. Moreover, the standard balloon model of BOLD effects may be modified to account for the observed nonlinear nature of deactivations by appropriate changes to simple hemodynamic parameters without recourse to new assumptions about the nature of the coupling between activity and oxygen use.     

Detection of glutamate and glutamine (Glx) by turbo spectroscopic imaging

Turbo spectroscopic imaging (TSI) is a spin echo spectroscopic imaging technique in which two or more echoes are acquired per excitation to reduce the acquisition time. The application of TSI has primarily been limited to the detection of uncoupled spins because the signal from coupled spins is modulated as a function of echo time. In this work we demonstrate how the TSI sequence can be modified to observe spins like the C₂ protons of Glx (≈3.75 ppm) which are involved solely in weak-coupling interactions. The technique exploits the chemical shift displacement effect by employing TSI refocusing pulses that have bandwidths which are less than the chemical shift difference between the target spins and the spins to which they are weakly coupled. The modified TSI sequence rewinds the J-evolution of the target protons in the slice of interest independently of the echo time or echo spacing, thereby removing any signal variation between successive echoes (apart from T₂ relaxation effects). In this study we tailored the narrow-bandwidth TSI sequence for observation of the C₂ Glx protons. The echo time was experimentally optimized to minimize signal contamination from myo-inositol, and the efficacy of the method was verified on phantom solutions of Glx and on brain in vivo.     

强光一号加速器测量电缆补偿技术

 为满足快信号测试要求,提出了利用滤波器原理设计补偿器来提高传输线带宽,以减小信号在传输过程中的畸变和损失。针对强光一号加速器测试电缆特性,设计制作了小型化的带宽补偿器。通过采用该电缆补偿技术,强光一号加速器测量电缆补偿后的传输带宽达到200 MHz,幅度为原始信号的1/3,满足了强光一号加速器测试电缆快信号传输的要求。给出了原始信号、未补偿信号及补偿后信号的比较结果,证明补偿后的信号明显比未补偿信号更接近原始信号,原始信号经电缆传输后造成的前沿损失和波形畸变通过带宽补偿器后获到了明显的补偿和修复。编制了专用补偿器设计软件,使补偿器初期设计中的极零对寻找、元器件参数计算等工作实现自动化。     

一种通带平坦的粗波分复用/解复用器件的研制

随着粗波分复用(CWDM)系统在城域网和接入网中日益广泛的应用,人们对粗波分复用／解复用器的研究也逐渐展开。报道了一种8通道波长间隔为20nm的粗复用／解复用器。该器件基于阵列波导光栅(AWG)原理设计,利用平面光波导技术(PLC)制作,采用多模干涉输入结构和“S”形阵列波导结构,实现了较宽的通带宽度和较低的串扰。实验测得1dB带宽大于10nm,相邻串扰大于24dB,非相邻串扰大于32dB。介绍了其设计原理和制作过程,给出了光束传播法(BPM)数值模拟结果,并和实验结果进行了对比。     

超高速行波电吸收调制器的k值设计方法

介绍了一种用于超高速行波电吸收调制器(TW-EAM)设计的“k值带宽法”.该方法考虑了影响调制器带宽的阻抗失配、相速度失配、微波衰减等因素,说明一个优化设计的TW-EAM其带宽可达到140 GHz.     

弹光调制光电转换放大电路设计

弹光调制干涉具调制的干涉光被探测器接收后输出高速变化的微弱电信号,能否将该电信号提取并放大输出对弹光调制-傅里叶变换光谱仪的研制至关重要。通过对调制干涉光进行理论分析,设计一种具有高信噪比和较高带宽的光电转换放大电路,主要由电源电路、光电转换电路、放大电路、理论通频带为100 kHz~3.5 MHz的带通滤波电路组成。实验结果表明:设计的电路能够将探测器输出的最大频率为1.6 MHz的信号放大至670 mV左右,实现了将探测器输出的微弱速变电信号从背景噪声中有效提取与放大,为后续傅里叶变换提供可靠数据。     

高速切削过程中诱发绝热剪切带形成的热塑性剪切波

提出了高速切削过程中诱发绝热剪切带形成的热塑性剪切波的传播机理,针对锯齿形切屑中热望性区域内的塑性梯度变形特征、动量和能量耗散情况,建立了与切削条件相关的热塑性剪切波的传播模型及剪切带宽度模型.在此基础上,通过淬硬45钢的切削实验并结合改进的Johnson-Cook本构模型分析了热塑性剪切波的传播规律,并将剪切带宽度模型与已提出的DB模型、WR模型和DM模型做了对比,结果表明,由热塑性剪切波传播理论推导的剪切带宽度模型与实验结果较其他模型吻合较好.