非线性左手材料中的二次谐波

基于电磁场理论，推导了无耗非线性左手材料中二次谐波的曼利－诺关系，及相位匹配条件下正向基波与逆向二次谐波的能量转换过程及其空间分布.验证了可将无耗非线性左手材料的入射面作为反射镜，把能量以二次谐波的形式反射.同时分别给出有限厚度介质板中基波和二次谐波的场强分布数值结果，验证了结论的正确性.最后从相位失配角度说明了相位匹配是分析非线性左手材料二次谐波的重要条件.这为研究左手材料的非线性理论奠定了基础.     

关于第14届材料磨损国际会议的简要评述

对第14届材料磨损会议重点涉及的生物摩擦学、金属磨损、表面涂层、冲蚀、纳米摩擦学、复合材料以及磨损监测等研究领域的最新进展进行了评述，对摩擦学领域今后的研究重点进行了展望．     

人造金刚石生长中的温度控制

 本文讨论了与腔体组装方法、温度梯度和边界条件等有关的温度控制问题及其对金刚石生长的影响。     

Prediction of particle sticking efficiency for fly ash deposition at high temperatures

The tendency of ash particles to stick under high temperatures is dictated by the ash chemistry, particle physical properties, deposit surface properties and furnace operation conditions. A model has been developed in order to predict the particle sticking efficiency for fly ash deposition at high temperatures. The model incorporates the particle properties relevant to the ash chemistry, particle kinetic energy and furnace operation conditions and takes into consideration the partial sticking behaviour and the deposit layer. To test the model, the sticking behaviours of synthetic ash in a drop tube furnace are evaluated and the slagging formation from coal combustion in a down-fired furnace is modelled. Compared with the measurements, the proposed model presents reasonable prediction performance on the particle sticking behaviour and the ash deposition formation. Through a sensitivity analysis, furnace operation conditions (velocity and temperature), contact angle and particle size have been found to be the significant factors in controlling the sticking behaviours for the synthetic ash particles. The ash chemistry and furnace temperature dictate the wetting potential of the ash particles and the melting ability of the deposit surface; particle size and density not only control the particle kinetic energy, but also affect the particle temperature. The furnace velocity condition has been identified as being able to influence the selective deposition behaviour, where the maximum deposition efficiency moves to smaller particles when increasing the gas velocity. In addition, the thermophoresis effect on the arrival rate of the particles reduces with increasing the gas velocity. Further, increasing the melting degree of the deposit layer could greatly enhance the predicted deposition formation, in particular for the high furnace velocity condition.     

Fabrication of BixPdy bimetallic materials characterized by catalytic activity at low temperature: Nitro reduction and Suzuki−Miyaura coupling reactions under green conditions

A simple method for synthesizing the Bi_xPd_y bimetallic particles is described. The structure, composition distribution and size of synthesized Bi_xPd_y bimetallic particles were characterized using a number of analytical techniques. The Bi:Pd atomic ratio (x:y) of the nanoparticles was determined to be approximately 1:3 (Bi₂₄Pd₇₆), 1:1 (Bi₅₄Pd₄₆) and 3:1 (Bi₇₄Pd₂₆). The (111) diffraction peaks within the X-ray diffraction patterns of the bimetallic nanoparticles shifted from 39.9° to 38.5° as the Bi content increased from 0% to 75%. The d-spacings calculated from the 2θ data of (111) planes were 2.33, 2.34, 2.32 and 2.26 nm for nanoparticles with a Bi:Pd atomic ratio of 3:1, 1:1, 1:3 and 0:1 respectively. The crystalline properties of the surface of the Bi_xPd_y bimetallic nanoparticles were observed in high-resolution transmission electron microscopy analysis. The d-spacings between the adjacent lattice planes were measured on the surface of Bi_xPd_y bimetallic nanoparticles by averaging 10 lattice fringes distance. A regular face-centered cubic lattice was observed throughout the prepared Bi_xPd_y bimetallic nanoparticles. The lattice d-spacing of the Bi₃Pd₁, Bi₁Pd₁ and Bi₁Pd₃, bimetallic nanoparticles was approximately 2.34, 2.33 and 2.32 Å, respectively, which can be indexed to the (111) planes. These measurements correspond to the values calculated using the Bragg equation (d = nλ/2sinθ). The catalytic activity of Bi_xPd_y bimetallic nanoparticles was determined for the nitro compound reduction and Suzuki-Miyaura coupling reactions under green conditions (in an aqueous solution). Bi₁Pd₃ nanoparticles were shown to provide the best catalytic performance during both reactions, resulting in a yield of 98% in both cases.     

Effectiveness of Darcy-Forchheimer and nonlinear mixed convection aspects in stratified Maxwell nanomaterial flow induced by convectively heated surface

The effect of nonlinear mixed convection in stretched flows of rate-type non-Newtonian materials is described. The formulation is based upon the Maxwell liquid which elaborates thermal relation time characteristics. Nanofluid properties are studied considering thermophoresis and Brownian movement. Thermal radiation, double stratification, convective conditions, and heat generation are incorporated in energy and nanoparticle concentration expressions. A boundary-layer concept is implemented for the simplification of mathematical expressions. The modeled nonlinear problems are computed with an optimal homotopy scheme. Moreover, the Nusselt and Sherwood numbers as well as the velocity, nanoparticle concentration, and temperature are emphasized. The results show opposite impacts of the Deborah number and the porosity factor on the velocity distribution.     

Quadratic convective flow of radiated nano-Jeffrey liquid subject to multiple convective conditions and Cattaneo-Christov double diffusion

A nonlinear flow of Jeffrey liquid with Cattaneo-Christov heat flux is investigated in the presence of nanoparticles. The features of thermophoretic and Brownian movement are retained. The effects of nonlinear radiation, magnetohydrodynamic (MHD), and convective conditions are accounted. The conversion of governing equations into ordinary differential equations is prepared via stretching transformations. The consequent equations are solved using the Runge-Kutta-Fehlberg (RKF) method. Impacts of physical constraints on the liquid velocity, the temperature, and the nanoparticle volume fraction are analyzed through graphical illustrations. It is established that the velocity of the liquid and its associated boundary layer width increase with the mixed convection parameter and the Deborah number.     

一种求解非线性无约束优化问题的充分下降的共轭梯度法

共轭梯度法是一类具有广泛应用的求解大规模无约束优化问题的方法. 提出了一种新的非线性共轭梯度(CG)法,理论分析显示新算法在多种线搜索条件下具有充分下降性. 进一步证明了新CG算法的全局收敛性定理. 最后,进行了大量数值实验,其结果表明与传统的几类CG方法相比,新算法具有更为高效的计算性能.     

A simulation-based analysis of the effect of a reflecting surface on aeroacoustic time-reversal source characterization and comparison with beamforming

This paper presents a simulation-based analysis of the effect of a reflecting surface on aeroacoustic Time-Reversal (TR) source localization/characterization and compares the results of TR with those obtained using cross-spectral Conventional Beamforming (CB). The TR technique is shown to require the use of at least two line arrays of microphones to accurately characterize the nature of aeroacoustic sources. This work, however, shows that in the presence of a rigid surface, only one line array of microphones is sufficient to accurately localize and characterize idealized aeroacoustic sources. Forward simulations were carried out using the 2-D Linearized Euler Equations on a rectangular domain with a rigid bottom boundary (modeling a 2-D semi-infinite space) for the test-cases of stationary idealized tonal aeroacoustic (monopole, dipole and lateral quadrupole) sources located in a fully-developed mean shear flow field wherein the acoustic pressure time–history was stored at the computational boundaries. A set of TR simulations are implemented that show for each test-case that only the top line array is required to accurately characterize the idealized aeroacoustic sources in the presence of a reflecting bottom boundary, thereby suggesting the redundancy of acoustic pressure measurement at the rigid surface. The test-case of convecting (moving) idealized aeroacoustic source was also considered and the TR simulation using only the top line array in the presence of reflecting bottom boundary was able to accurately retrieve the source trajectory and simultaneously characterize its nature. This numerical experiment demonstrates in principle that when a rigid surface is mounted on the floor of an Anechoic Wind Tunnel, the use of only one (top) line array of microphones should be sufficient to characterize the nature and location of experimental flow-induced noise source. Acoustic source maps were also obtained using the CB method based on the Method of Images (to model the reflecting surface) and incorporation of the Ray-Tracing algorithm necessary to account for the effect of mean flow. The CB results were found to be highly comparable to those obtained using TR for the test-cases of non-convecting sources; thereby demonstrating the conceptual equivalence of the Method of Images and directly implementing the rigid-wall condition during TR for source localization/characterization.     

Space potential particles to enhance the stability of projection-based particle methods

Particle methods have been seldom verified by a Karman vortex simulation, which is commonly performed as a typical benchmark in computational fluid dynamics. This is mainly due to a difficulty in suppression of occurrence of unphysical voids manifested usually in a strong vortex on account of definition of free surface by the Lagrangian tracking framework with inconsistency in volume conservation. This paper presents a simple and effective scheme as a free-surface boundary condition of projection-based particle methods, namely the MPS (moving particle semi-implicit) and Incompressible SPH (ISPH) methods to handle the free surface with consistency in volume conservation. The new scheme is introduced into the Poisson pressure equation (PPE) with consideration of a potential in void space as space potential particle (SPP), to reproduce physical motions of particles around free surface through a particle–void interaction. The enhancing effect of the newly proposed SPP scheme is shown by simulating a few numerical tests, including a whirling water flow, a two-phase surfacing flow, and a set of Karman vortex simulations.