石墨探针—原子吸收光谱法测定人发中痕量铟的研究

探针原子化技术是一种实现等温原子化,改善灵敏度的行之有效的方法。本文采用此方法对痕量钿进行了一系列条件试验,峰面积与钿浓度在0～50ng·ml~(-1)范围内呈线性关系,其特征量4.8pg,检出限21.5pg,相对标准偏差5.7％,并成功地测定了成人发中铟的含量,范围在12～159pg·g~(-1),回收率96.4％～103.2％。该方法灵敏度高,操作简单、快速,结果满意。     

高纯氧化镝电感耦合等离子体原子发射光谱法摄谱分析时光谱干扰校正方法的研究

本文建立了高纯氧化镝样品ICP摄谱分析时干扰系数法校正光谱干扰的方法。测定了镝基体对14种稀土杂质元素20条灵敏分析线的干扰系数(KCT)。并有效地校正了镝基体造成的光谱干扰,获得满意的结果。     

MORPHOLOGICAL OBSERVATION OF SINGLE-CHAIN POLY (METHYL METHACRYLATE) PARTICLES*

Tapping mode atomic force microscope has been applied to observe single-chain PMMAparticles which were stored for six months at room temperature after sprayed from verydilute solutions in good solvents, good/poor mixed solvents, and a theta solvent. Monodis-perse PMMA standards of molecular weights ranging from 7.90×10~4 to 1.3×10~6 wereused to investigate the effect of molecular weight oh the size of the single-chain PMMAparticles. These single-chain particles showed close to spherical shapes. The morphologyof single-chain PMMA particles of a given molecular weight was found to be identical inspite of different solvents used for solution spraying. Molecular weigh dependence of theparticle dimension was also found. The diameters of single-chain PMMA particles aftercorrection of tlp-geometry effect were compared to the values estimated from molecularweight and density.     

硅的原子吸收光谱分析进展

对近十年来用原子吸收光谱法测定硅的情况进行评述．重点介绍用石墨炉测定硅时，为了避免硅与石墨炉中碳形成难熔碳化硅影响测定硅的灵敏度而使用的各种化学改进剂，涂层石墨管和一些新的实验技术．引用参考文献４２篇．     

原子吸收法测定中药脑心通中微量和宏量元素的含量

采用原子吸收分光光度法测定了脑心通胶囊中钠、钾、钙、镁、铁、铬、锰、镍、镉、铜、锌11种元素的含量。结果表明，脑心通胶囊中含有较丰富的微量元素，为探讨中药脑心通中微量元素与治疗心脑血管疾病的关系提供了有用的数据。     

铝硫二元团簇的组分及其光解规律

硫与金属元素所形成的二元团簇具有很多重要的特性,已受到人们的普遍重视.用激光-串级飞行时间质谱仪,我们曾研究了硫与过渡金属钽、铁等的二元团簇.最近我们选取主族金属元素铝,研究了铝硫团簇的形成及其光解,实验结果表明,与钽硫或铁硫团簇相比,铝硫团簇无论在其组份构成还是在其光解方面,都表现出鲜明的特有规律性.实验的主要参数如下:溅射用激光为Nd:YAG 二倍频,其输出强度控制在约10~7W·cm~(-2),激光的重复频率10Hz 样品位于激光束的焦点附近,由焦距f=50cm 的透镜调整其聚焦状     

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY（METHYL METHACRYLATE）

Aggregation process of isotactic poly(methyl methacrylate) (i-PMMA) has been studied extensively for many years, and considerable progress has been made in both experimental and theoretical studies. They are, however, seldom sustained by real-space observations of the underlying morphology. In this paper, the aggregation process of i-PMMA in concentrated acetone solutions and the fractal structure of the resulting three-dimensional clusters were characterized on the basis of real-space AFM observations of their two-dimensional projection. It was found that spherical multiple-chain particles formed upon collapse and aggregation of the involving chains as a whole during quenching the solution to room temperature. By keeping the solution at room temperature, the initially formed particles stick together upon contact to form larger particles through reassembling very slowly. The succeeding collision of the enlarged spherical particles leads to the formation of small clusters. These newly formed small clusters grow when they meet with other clusters or single Brownian particles. This leads to the formation of large clusters with fractal dimension of 1.95$±0.05, which suggest a reaction-limited cluster aggregation of i-PMMA in a concentrated acetone solution. This is in accordance with the conclusion obtained by light scattering measurements.     

Kinetic study of the sulfonation of hydrogenated styrene butadiene block copolymer (HSBS): Microstructural and electrical characterizations

In this work homogeneous sulfonation kinetic and both, microstructural and electrical characterizations of hydrogenated styrene butadiene block copolymer (HSBS) were studied. The incorporation of sulfonic groups was checked by infrared spectroscopy (FTIR-ATR) and the sulfonation level was determined by both, elemental analysis (E.A.) and chemical titration. Thermal behavior was studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), in order to determine thermal transitions and stability, respectively. Microstructure was studied, by means of dynamic mechanical analysis (DMA). Atomic force microscopy (AFM) was studied for several samples and evidenced a morphology change when the sulfonation level increases. Finally, electrical behavior was recorded by means of electrochemical impedance spectroscopy (EIS) and the four-probe technique (FPT). Results show that sulfonation of the benzene rings, in the styrene units, has effectively occurred and that the sulfonation level increases with reaction time. When incrementing the sulfonation level, a structural change in the copolymer was observed. Interconnected clusters allow proton conduction through the membrane. The ion conductivity obtained was about 10⁻² S/cm.     

Instrumental modification intended to save time,and volumes of sample and reagent solutions,in the atomic fluorescence spectrometric determination of mercury

Use of small membrane pumps, instead of peristaltic pumps, to introduce sample and reagent solutions into the spectrometer has several advantages in atomic fluorescence spectrometric determination of mercury. This simple modification results in a substantial saving in the time required for the measurements and so 90% of reagent solution volumes and 95% of sample solution volumes are saved, with a consequent decrease in the volume of waste generated. The sampling frequency is almost tripled, with no deterioration in sensitivity, which is similar to that obtained by use of peristaltic pumps. The relative standard deviation for ten consecutive measurements of a 1 μg L⁻¹ mercury solution was approximately 2%. Figure Small membrane pumps for the atomic fluorescene spectro metric determination of mercury     

SYNTHESIS OF AN AMPHIPHILIC PPESK-g-P(PEGMA) GRAFT COPOLYMER VIA ATRP AND ITS USE IN BLEND MODIFICATION OF PPESK MEMBRANES

Preparation of an amphiphilic graft copolymer having poly(phthalazinone ether sulfone ketone)(PPESK) as main chains was carried out by atom transfer radical polymerization(ATRP).The precursor,chloromethylated PPESK (CMPPESK),was prepared by using chioromethylether as chloromethylation agent.Then,poly(ethylene glycol) methyl ether methacrylate(PEGMA) was used as monomer to synthesize PPESK-g-P(PEGMA) by ATRP method under the catalysis of a cuprous chloride/2,2'-bipyridyl system.PPESK/PPESK-g-P(PEGMA) blen...