Detection of NMR signals with a radio-frequency atomic magnetometer

We demonstrate detection of proton NMR signals with a radio-frequency (rf) atomic magnetometer tuned to the NMR frequency of 62 kHz. High-frequency operation of the atomic magnetometer makes it relatively insensitive to ambient magnetic field noise. We obtain magnetic field sensitivity of 7 fT/Hz1/2 using only a thin aluminum shield. We also derive an expression for the fundamental sensitivity limit of a surface inductive pick-up coil as a function of frequency and find that an atomic rf magnetometer is intrinsically more sensitive than a coil of comparable size for frequencies below about 50 MHz.     

Decay of metastable states in Nd II

The difficulty associated with an accurate determination of transition rates for forbidden lines in lowly ionized heavy elements is illustrated in the case of Nd II. We have investigated the radiative decay of the low-lying metastable levels in Nd⁺ including the two levels K_11/2 and I_13/2. In these two particular cases, using different theoretical approaches, we find that the decay is dominated by the M1 channels but that the E2 contributions are of the same order of magnitude. These levels have also been studied experimentally by lifetime measurements with the heavy ion storage ring CRYRING of Stockholm University. The difficulties encountered when performing such experiments are underlined and discussed.     

Contradictory effect of gold nanoparticle-decorated molybdenum sulfide nanocomposites on amyloid-β-40 aggregation

The effect of gold nanoparticle-decorated molybdenum sulfide (AuNP-MoS₂) nanocomposites on amyloid-β-40 (Aβ₄₀) aggregation was investigated. The interesting discovery was that the effect of AuNP-MoS₂ nanocomposites on Aβ₄₀ aggregation was contradictory. Low concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides and accelerate Aβ₄₀ fibrils aggregation. However, although high concentration of AuNP-MoS₂ nanocomposites could enhance the nucleus formation of Aβ₄₀ peptides, it eventually inhibited Aβ₄₀ aggregation process. It might be attributed to the interaction between AuNP-MoS₂ nanocomposites and Aβ₄₀ peptides. For low concentration of AuNP-MoS₂ nanocomposites, it was acted as nuclei, resulting in the acceleration of the nucleation process. However, the structural flexibility of Aβ₄₀ peptides was limited as the concentration of AuNP-MoS₂ nanocomposites was increased, resulting in the inhibition of Aβ₄₀ aggregation. These findings suggested that AuNP-MoS₂ nanocomposites might have a great potential to design new multifunctional material for future treatment of amyloid-related diseases.     

Frequency ratios of Sr,Yb, and Hg based optical lattice clocks and their applications

This article describes the recent progress of optical lattice clocks with neutral strontium (⁸⁷Sr), ytterbium (¹⁷¹Yb) and mercury (¹⁹⁹Hg) atoms. In particular, we present frequency comparison between the clocks locally via an optical frequency comb and between two Sr clocks at remote sites using a phase-stabilized fibre link. We first review cryogenic Sr optical lattice clocks that reduce the room-temperature blackbody radiation shift by two orders of magnitude and serve as a reference in the following clock comparisons. Similar physical properties of Sr and Yb atoms, such as transition wavelengths and vapour pressure, have allowed our development of a compatible clock for both species. A cryogenic Yb clock is evaluated by referencing a Sr clock. We also report on an Hg clock, which shows one order of magnitude less sensitivity to blackbody radiation, while its large nuclear charge makes the clock sensitive to the variation of fine-structure constant. Connecting all three types of clocks by an optical frequency comb, the ratios of the clock frequencies are determined with uncertainties smaller than possible through absolute frequency measurements. Finally, we describe a synchronous frequency comparison between two Sr-based remote clocks over a distance of 15 km between RIKEN and the University of Tokyo, as a step towards relativistic geodesy.     

Surface Roughness Characterization of Poly(methylmethacrylate) Films with Immobilized Eu(III) β-Diketonates by Fractal Analysis

The structural complexity of the 3-D surface of poly(methylmethacrylate) films with immobilized europium β-diketonates was studied by atomic force microscopy and fractal analysis. Fractal analysis of surface roughness revealed that the 3-D surface has fractal geometry at the nanometer scale. Poly(methylmethacrylate) (PMMA) as immobilization matrix is dense and uniform, and a tendency for formation of chain structures was observed. Fractal analysis can quantify key elements of 3-D surface roughness such as the fractal dimensions D _f determined by the morphological envelopes method of the Eu(DBM)₃ and Eu(DBM)₃ · dpp nanostructures, which are not taken into account by traditional surface statistical parameters.     

图解中心原子轨道的杂化方式

借助图形方法,分析了不同常见几何构型分子中心原子轨道杂化方式的原因——与端基原子轨道的有效重叠,利用中心原子价层轨道的能量接近度的判断,决定最终可能的杂化方式。     

Modification of Hole Transport Layers for Fabricating High Performance Non‐fullerene Polymer Solar Cells

Interfacial engineering is expected to be a feasible strategy to improve the charge transport properties of the hole transport layer (HTL), which is of crucial importance to boost the device performance of organic solar cells (OSCs). In this study, two types of alcohol soluble materials, 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane (F₄‐TCNQ) and di‐tetrabutylammoniumcis–bis(isothiocyanato)bis (2,2’‐bipyridyl‐4,4’‐dicarboxylato) ruthenium(II) (N719) dye were selected as the dopant for HTL. The doping of F₄‐TCNQ and N719 dye in poly (ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) with and without integrating a graphene quantum‐dots (G‐QDs) layer has been explored in poly[[2,6′‐4‐8‐di(5‐ethylhexylthienyl)benzo[1,2‐b:3,3‐b]dithiophene][3‐fluoro‐2[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thio‐phenediyl:(2,2′‐((2Z,2′Z)‐(((4,4,9, 9‐tetrakis(4‐hexylphenyl)‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl)bis(4‐((2‐ethylhexyl)oxy)thiophene‐5,2‐diyl))bis(methanylylidene))bis(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile (PTB7‐Th:IEICO‐4F) OSCs. The power conversion efficiency of the non‐fullerene OSCs has been increased to 10.12% from 8.84%. The influence of HTL modification on the nano‐morphological structures and photophysical properties is analyzed based on the comparative studies performed on the control and modified devices. The use of chemical doping and bilayer strategy optimizes the energy level alignment, nanomorphology, hole mobility, and work‐function of HTL, leading to considerable reduction of the leakage current and recombination losses. Our work demonstrates that the doping of HTL and the incorporation of G‐QDs layer to constitute a bilayer HTL is an promising strategy to fabricate high performance non‐fullerene polymer solar cells     

Different defect morphologies in polyethylene crystal induced by surface physicochemical properties

The physicochemical properties of surfaces have a great effect on the micro-morphologies of the crystal structures which are in contact with them.Understanding the interaction mechanism between the internal driving forces of the crystal and external inducing forces of the surfaces is the prerequisite of controlling and obtaining the desirable morphologies.In this work,the dynamic density functional theory was applied to construct the free energy functional expression of polyethylene(PE) lattice,and the micro-dynamic evolution processes of PE lattice morphology near the surfaces with different properties were observed to reveal the interaction mechanism at atomic scale.The results showed that the physical and chemical properties of the external surfaces synergistically affect the morphologies in both the defect shapes and the distribution of the defect regions.In the absence of the contact surfaces,driven by the oriented interactions among different CH2 groups,PE lattices gradually grow and form a defect-free structure.Conversely,the presence of contact surfaces leads to lattice defects in the interfacial regions,and PE lattice shows different self-healing abilities around different surfaces.     

Recent progress in measurements of oscillatory forces and liquid properties under confinement

The present review paper focuses on direct measurements of oscillatory forces. Beside the surface forces apparatus (SFA), atomic force microscopy (AFM) has emerged as the most commonly used technique to measure surface forces. Recent instrumental advances of both methods are highlighted in the review. Different systems, showing oscillatory forces are classified. Principle distinction is made between 1-component liquids (water, organic liquids and liquid crystals), pseudo 1-component liquids (ionic liquids and microemulsions) and 2-component liquids (dispersions containing polyelectrolytes, micelles or nanoparticles). In the last few years, the oscillatory force studies address particle characterisation, synergistic effects in multicomponent systems, the introduction of ‘switchable’ forces, and resolving liquid properties under confinement. Last but not least, the ability of AFM and SFA to measure oscillatory forces is discussed.     

电磁感应在线消化-原子荧光光谱法测定茶水中的砷

利用电磁感应加热原理,研制了在线消化还原、氢化物发生原子荧光法分析装置,实现了茶水中As量的在线测定.对各种实验参数和干扰情况进行了研究.方法的检出限为0.063 μg/L;样品分析精密度(RSD)为2.5%(n=11).