Asymptotic expansion homogenization of discrete fine-scale models with rotational degrees of freedom for the simulation of quasi-brittle materials

Discrete fine-scale models, in the form of either particle or lattice models, have been formulated successfully to simulate the behavior of quasi-brittle materials whose mechanical behavior is inherently connected to fracture processes occurring in the internal heterogeneous structure. These models tend to be intensive from the computational point of view as they adopt an “a priori” discretization anchored to the major material heterogeneities (e.g. grains in particulate materials and aggregate pieces in cementitious composites) and this hampers their use in the numerical simulations of large systems. In this work, this problem is addressed by formulating a general multiple scale computational framework based on classical asymptotic analysis and that (1) is applicable to any discrete model with rotational degrees of freedom; and (2) gives rise to an equivalent Cosserat continuum. The developed theory is applied to the upscaling of the Lattice Discrete Particle Model (LDPM), a recently formulated discrete model for concrete and other quasi-brittle materials, and the properties of the homogenized model are analyzed thoroughly in both the elastic and the inelastic regime. The analysis shows that the homogenized micropolar elastic properties are size-dependent, and they are functions of the RVE size and the size of the material heterogeneity. Furthermore, the analysis of the homogenized inelastic behavior highlights issues associated with the homogenization of fine-scale models featuring strain-softening and the related damage localization. Finally, nonlinear simulations of the RVE behavior subject to curvature components causing bending and torsional effects demonstrate, contrarily to typical Cosserat formulations, a significant coupling between the homogenized stress–strain and couple-curvature constitutive equations.     

Asyptotics for linear difference equations I:basic theory

We present here a unified treatment of asymptotic theory of linear difference equations. This is based on anadapted theory of discrete dichotomy. The obtained results narrow the gap between Poincarés Theorem and (the discrete analoue of) Levinson's Theorem.     

A three‐dimensional Cartesian cut cell method for incompressible viscous flow with irregular domains

A three‐dimensional Cartesion cut cell method is presented for the simulations of incompressible viscous flows with irregular domains. A new model (referred to as ‘6+N’ model) is proposed to describe arbitrarily shaped cut cells and treat all the cells as polyhedrons with 6+N faces. The finite volume discretization of the Navier–Stokes equation is then implemented by using the ‘6+N’ model to separate the surface flux integrals into two parts, that is, the fluxes through the basic face of the hexahedron and those through the cutting surfaces. The previously proposed Kitta Cube algorithm and volume computer‐aided design platform (J. Comput. Aided. Des. 2005; 37(4): 1509–1520. Doi:10.1016/j.cad.2005.03.006) are adopted to generate cut cells and provide shape data and physical attributes for the numerical analysis. A modified SIMPLE‐based smoothing pressure correction scheme is applied to suppress checkerboard pressure oscillations caused by the collocated arrangement of velocities and pressure. The calculation accuracy of the numerical method expressed by L₁ and L _∞ norm errors is first demonstrated by the simulation of a pipe flow. Then its feasibility, efficiency, and potential in engineering applications are verified by applying it to solve natural convections between concentric spheres and between eccentric spheres. The heat transfer patterns in eccentric spheres are also obtained by using the numerical method. Copyright © 2011 John Wiley & Sons, Ltd.     

Flocking and asymptotic velocity of the Cucker–Smale model with processing delay

The processing delay is incorporated into the influence function of the well-known Cucker–Smale model for self-organized systems with multiple agents. Both symmetric and non-symmetric pairwise influence functions are considered, and a Lyapunov functional approach is developed to establish the existence of flocking solutions for the proposed delayed Cucker–Smale model. An analytic formula is given to calculate the asymptotic flocking velocity in terms of model parameters and the variation of the position during the initial time interval.     

Elastic behavior of composites containing multi-layer coated particles with imperfect interface bonding conditions and application to size effects and mismatch in these composites

This paper proposes a procedure to deal with n-layered inclusion based composites with imperfect interfaces (which conditions consist of displacement or stress vector jumps) respecting spherical symmetry. For that purpose, “discontinuity matrices” have been introduced. These matrices have been derived for several classical interface-models and an asymptotic method has been used to determine some of them. A self-consistent condition based on a strain-energy equivalence in the case of inclusion-matrix type composite materials is restated for n-layered inclusions with imperfect interfaces and applied to get estimates of such composites materials. The remarkable feature of the presently self consistent approach is that it does not need any tedious algebra providing the attached interface models respect the spherical symmetry. The present Generalized Self Consistent Model (GSCM) is then used to study size effects and mismatch in composites reinforced by coated inclusions.     

一类综合评价指数编制路径及案例

综合评价指数是一种广义上的统计指数,在讨论了综合评价指数与一般统计指数不同的基础上,引述了综合评价指数一般编制步骤并详细分析研究了综合评价指数编制过程中的权重确定,提出了基于等权设计思想的加权修正综合评价指数编制方法,最后以甘肃省装备制造产业为例进行了展示.     

Asymptotic expansions of Kummer hypergeometric functions with three asymptotic parameters a,b and z

In a recent paper (Temme, 2021) new asymptotic expansions are given for the Kummer functions $M(a,b,z)$ and $U(a,b+1,z)$ for large positive values of $a$ and $b$, with $z$ fixed and special attention for the case $a～b$. In this paper we extend the approach and also accept large values of $z$. The new expansions are valid when at least one of the parameters $a$, $b$, or $z$ is large. We provide numerical tables to show the performance of the expansions.     

Quantitative assessment of motion correction for high angular resolution diffusion imaging

Several methods have been proposed for motion correction of high angular resolution diffusion imaging (HARDI) data. There have been few comparisons of these methods, partly due to a lack of quantitative metrics of performance. We compare two motion correction strategies using two figures of merit: displacement introduced by the motion correction and the 95% confidence interval of the cone of uncertainty of voxels with prolate tensors. What follows is a general approach for assessing motion correction of HARDI data that may have broad application for quality assurance and optimization of postprocessing protocols. Our analysis demonstrates two important issues related to motion correction of HARDI data: (1) although neither method we tested was dramatically superior in performance, both were dramatically better than performing no motion correction, and (2) iteration of motion correction can improve the final results. Based on the results demonstrated here, iterative motion correction is strongly recommended for HARDI acquisitions.     

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: Case of thermoelastic stress analysis

In this paper, we propose a compensated pixelwise calibration that integrates the effects of the camera housing temperature. The results of this calibration are compared on black body images to classic two points Non Uniformity Correction based calibrations, compensated or not. It is shown that the proposed approach leads to a significant improvement in the thermal resolution with a reduction in the mean error as well as the standard deviation. The approach is finally challenged on a real case measurement focusing on thermoelasticity. The gain in terms of accuracy measurement is highlighted by comparing the proposed calibration to classic calibrations and the scope of interest of this new calibration is discussed.     

高精度中小11径非球面修抛技术研究

为实现高精度中小口径非球面的加工，介绍了一种非球面修抛技术。基于Preston假设，将抛光过程描述成一个线性方程，计算得到材料的去除量与抛光时间、抛光压力和零件转速之间的函数关系。设计了整体修抛法和环带修抛法两种方法，在数控抛光的基础上，对口径为Ф117mm的凹抛物面和口径为Ф17mm凸双曲面进行修抛，修抛后非球面的面形精度PV值为0．184μm，RMS均小于0．032μm，达到了工程化应用要求，实现了中小口径非球面的高精度加工。