纳米颗粒悬浮液池内泡状沸腾的实验研究

本文对纳米颗粒悬浮液在平壁面上池内沸腾进行了实验研究。实验用的纳米粒子为26 nm的铁粉和13 nm的三氧化二铝纳米粉末,基液为去离子水。分别配成体积浓度为0．1％, 1％和2％的悬浮液。实验结果表明,纳米悬浮颗粒对液体沸腾换热过程的影响会随着纳米颗粒性质,颗粒浓度及热流密度大小的不同而出现不同的效果;加入纳米颗粒后, 对基液沸腾换热的影响存在着两个相反的作用机制,它们分别为:纳米颗粒增强了液体内部的热量迁移能力(热物性的影响)和改变了加热面的表面结构特性(加热面特性的影响)。     

q变形对相干态的相位概率分布特性

通过推广Pegg和Barnett的相位算符和相位态到q变形的双模情况, 应用数值计算 研究了q变形对相干态的相位概率分布特性. 结果表明, q变形对相干态的相位概率分布受到相位参数、q参数和参数│ξ│的调节, 从而反映出不同的量子相干特性.     

功能性丙烯酸/MBAM体系共聚产物的研制

以丙烯酸和MBAM为主要原料，经聚合，合成了一种高性能的具有良好保水性能的聚合产物，其保水量达到750～1000倍．50℃以下有良好的保水性能，28℃以下有极好的保水性能，并研究了工艺条件对该产品性能的影响因素．     

Synthesis and electrical characteristics of polyaniline nanoparticles and their polymeric composite

Monodisperse polyaniline nanoparticles (PAPSSA) were synthesized from an oxidative dispersion polymerization using poly(sodium 4-styrenesulfonate) (PSSA) as both a polymeric stabilizer and a dopant agent due to its acidity. The nanoparticles were being stabilized with two different molecular weight of PSSA. Size effect of PAPSSA particles were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The d.c. electrical conductivity of composite films on the glass substrate was measured by a four-probe method. It was found that the electrical properties of the composite films are affected by the content of nano-sized polyaniline and different molecular weights of stabilizer in the poly(vinyl alcohol) (PVA) matrix.     

Isotone relations revisited

We propose a new approach towards proving that the fixed point property for ordered sets is preserved by products. This approach uses a characterization of fixed points in products via isotone relations. First explorations of classes of isotone relations are presented. These first explorations give us hope that this approach could lead to advances on the Product Problem.     

Dynamic mechanical thermal analysis transitions of partially and fully substituted cellulose fatty esters

The main transitions of cellulose fatty esters with different degrees of substitution (DSs) were investigated with dynamic mechanical thermal analysis. Two distinct main relaxations were observed in partially substituted cellulose esters (PSCEs). They were attributed to the glass‐transition temperature and to the chain local motion of the aliphatic substituents. The temperatures of both transitions decreased when DS or the number of carbon atoms (n) of the acyl substituent increased. Conversely, all the transitions of fully substituted cellulose esters occurred within a narrow temperature range, and they did not vary significantly with n. This phenomenon was explained by the formation of a crystalline phase of the fatty substituents. The presence of few residual OH groups in PSCEs was responsible for a large increase in the storage bending modulus, and it eliminated the effect of n on damping. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 281–288, 2003     

Total synthesis of (±) maculalactone A, maculalactone B and maculalactone C and the determination of the absolute configuration of natural (+) maculalactone A by asymmetric synthesis

Maculalactones A, B and C from the marine cyanobacterium Kyrtuthrix maculans are amongst the only compounds based on the tribenzylbutyrolactone skeleton known in nature and (+) maculalactone A from the natural source possesses significant biological activity against various marine herbivores and marine settlers. We now report a concise synthesis of racemic maculalactone A in five steps from inexpensive starting materials. Maculalactones B and C were synthesized by a minor modification to this procedure, and the synthetic design also permitted an asymmetric synthesis of maculalactone A to be achieved in around 85% ee. The (+) and (−) enantiomers of maculalactone A were assigned, respectively, to the S and R configurations on the basis of the chiral selectivity expected for catecholborane reduction of an unsymmetrical ketone in the presence of Corey's oxazoborolidine catalyst. Surprisingly, it appeared that natural (+) maculalactone A was biosynthesized in K. maculans in a partially racemic form, comprising ca. 90-95% of the (S) enantiomer and 5-10% of its (R) enantiomer. Coincidentally therefore, the percentage enantiomeric excess of the product obtained from asymmetric synthesis almost exactly matched that found in nature.     

Synthesis and applications of chiral bis-THF in asymmetric synthesis

The synthesis of enantiopure bis-THF is described, starting from d-mannitol. Bis-THF is used as chiral ligand for organolithium reagents in four different reactions. The enantioselectivity provided by this ligand is moderate, and the asymmetric induction is in line with the expected model.     

K-强凸空间的一些性质

结合Banach空间的Drop性，利用K维体积给出了K—强凸空间的一个新的定义，同时也给出了K—强光滑空间定义的K维体积表示，然后利用单位圆的切片证明了K—强凸空间是自反空间，进而证明了K—强凸空间与K—强光滑空间是一对对偶空间．最后利用Drop性的切片描述证明了K—强凸空间具有Drop性．     

The Asymmetric Avalanche Process

An asymmetric stochastic process describing the avalanche dynamics on a ring is proposed. A general kinetic equation which incorporates the exclusion and avalanche processes is considered. The Bethe ansatz method is used to calculate the generating function for the total distance covered by all particles. It gives the average velocity of particles which exhibits a phase transition from an intermittent to continuous flow. We calculated also higher cumulants and the large deviation function for the particle flow. The latter has the universal form obtained earlier for the asymmetric exclusion process and conjectured to be common for all models of the Kardar–Parisi–Zhang universality class.