Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

Where are the Sn atoms in LaSb2Snx, 0.1?x?∼0.75?

The composition range and (composite modulated) structure of compounds within the wide range non-stoichiometric LaSb₂Sn_x, 0.1?x?0.75, solid solution is carefully investigated via a combined electron diffraction, XRD and electron probe microanalysis study. Evidence for metastability of the LaSb₂Sn_x phase at the low x composition end of the solid solution is presented. Direct evidence is found for a reasonably (although by no means perfectly) well ordered Sn sub-structure which is, in general, mutually incommensurable with respect to a very well ordered underlying LaSb₂ sub-structure along both a and c directions. The overall (3+2)-d superspace group symmetry is given along with a discussion of the consequences as regards the arrangement of the Sn atoms. The Sn sub-structure c-axis cell dimension shows very little variation with composition x providing direct experimental evidence of the importance of Sn-Sn metallic bonding (along one-dimensional [001] Sn strings) for the stability of the phase.     

用θ-2θ型衍射仪测定溶液结构的新方法

叙述了用θ－２θ型Ｘ射线衍射仪精确测定电解质溶液结构的新实验技术。设计制作了具有恒温功能的超厚液体样品池，并建立了样品池窗口强度的校正方法。优化了液体Ｘ射线衍射数据和结构参数精细化的计算机程序，获得了非常令人满意的实验结果。由θ－２θ型Ｘ射线衍射仪精确测定的径向分布函数与θ－θ型衍射仪自由散射比较，表明ＤＲＦ分辨率有所提高。     

Solute-solvent interactions in water-tert-butyl alcohol mixtures. VI. Enthalpies of solution for halo-para-substituted benzoates

Enthalpies of solution of sodium benzoate, potassium benzoate, and potassium halo-substituted benzoates are reported at 298.15°K in water and in nine water-tert-butyl alchol mixtures. Transfer enthalpies from water to the mixed solvent go through a maximum for about 0.055 mole fraction of alcohol. Additivity of ionic contributions in the enthalpies of transfer is verified. Substituent effects on the transfer enthalpies of benzoates are discussed in terms of size of the solutes and cohesion of the solvent mixtures. For Part V, see ref. 1.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

化学镀钴基合金镀液中钴的快速测定

研究了采用显色剂 苦胺酸偶氮变色酸对化学镀钴基合金镀液中钴含量进行测定的试验条件,在pH11的氨 氯化铵缓冲溶液中,钴与显色剂配合物的最大吸收峰在650nm波长处,钴(Ⅱ)在0～60μg/25ml范围内服从比耳定律,表观摩尔吸光系数为3.1×104L·mol-1·cm-1。该法测定钴的选择性好,在大量镍存在下,也能准确测定,对镀液样品进行了测定,相对标准偏差小于1%,结果满意。     

Transference numbers for ultra concentrated solutions of aqueous hydrochloric acid at 25°C

Transference numbers of HCl(aq) solutions at 25°C, from 0.01 to 13.6 mol-kg^–1(m) have been obtained by measuring the emf of cells with transference using hydrogen gas/platinum electrodes. Good agreement is obtained at concentrations up to 1 m with all previous data, and our results strongly corroborate those of King and Spiro over the 2–8m concentration range. The transference numbers of the hydronium ion fit the empirical equation, _H ^HCl = 0.821 + 0.0457m ^1/2 – 2.476×10^–2m – 1.90×10^–4 m ² – 1.45×10^–5 m ³ the maximum deviation in T _H ^HCl being 0.003.     

Effect of solvent composition on free release static coating of capillary columns

Summary Three aspects with respect to the selection of solvents for static coating of capillary columns, i.e. coating speed, occurrence of bumping and solubility of stationary phases are discussed. Hypotheses are proposed in an attempt to explain the observed facts that mixed solvents result in much higher coating speeds than those obtained from pure solvents, that a proper choice of solvents together with a good and uniform deactivitation of the column inner wall is needed to prevent bumping. Stationary phase solubility vs. solvent composition is also briefly discussed.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Exact solution of plane isolated crack normal to a bimaterial interface of infinite extent

This paper presents an exact solution for the transverse interface crack in the plane strain case. The crack is perpendicular to the interface and in one material. The exact complex stress functions are first obtained with some unknown constants. The satisfactions of all boundary conditions are then checked, the condition at infinity is considered and the unknown constants are determined. Further study may focus on the case with different shear moduli and the influence of the large deformation.The English text was polished by Keren Wang.