Investigation of the Electrochemical Reduction of Benzophenone in Aprotic Solvents Using the Method of Cyclic Voltammetry

The reduction of benzophenone (Bzph) in 3-pentanone (PEN), acetone (ACE), N,N-dimethylacetamide (DMA), N,N-dimethylformamide (DMF), tetrahydrofuran (THF), acetonitrile (ACN) and dimethyl sulfoxide (DMSO) with n-tetrabutylammonium hexafluorophosphate (TBAPF₆) as background electrolyte was studied using the technique of cyclic voltammetry at the temperature of 263.15 K. The half-wave potentials (E _1/2) were extracted. The reduction of Bzph occurs in two successive one-electron steps to produce first the free radical anion Bzph⁻ and then the dianion Bzph²⁻. The results indicated that the radical anion Bzph⁻ is reoxidized to Bzph in all investigated solvent media whereas the dianion Bzph²⁻ is reoxidized to Bzph⁻ only in THF. The heterogeneous electron-transfer rate constants (k _s ) were evaluated by employing the electrochemical rate equation proposed by Nicholson. The rate of electron transfer for the Bzph/Bzph⁻ couple was found to be relatively slow in all investigated solvent media. Consequently, the electron-transfer processes can be recognized as quasi-reversible. The diffusion coefficients (D) of Bzph in the investigated solvent media have been calculated using the modified Randles-Sevcik equation. The effect of the physical and chemical properties of the solvent medium on the electrochemical behavior of Bzph has been examined.     

掺硼多晶金刚石膜的电化学性能研究

采用EACVD(Electron Assisted Chemical Vapor Deposition)方法制备了掺硼金刚石膜, 并用扫描电镜、拉曼光谱及霍尔效应等测试方法对其表面形貌、生长特性、载流子浓度以及导电性能进行了分析. 测试结果表明, 掺硼金刚石膜是由微米级晶粒组成的多晶膜, 其载流子浓度为4.88×1020 cm-3, 电阻率为0.03 Ω·cm, 是高品质金刚石膜. 用该金刚石膜制作电化学电极, 利用循环伏安法分别测量了金刚石膜电极在氯化钾空白底液、亚铁氰化钾溶液和左旋半胱氨酸溶液中的循环伏安曲线, 发现该金刚石膜电极在水溶液中具有宽的电化学窗口(约为3.7 V)和接近零的背景电流, 在生物制剂的检测中具有很高的灵敏度和良好的稳定性, 是一种理想的电化学电极材料.     

Electrocatalytic Determination of Ascorbic Acid at the Surface of 2,7‐Bis(ferrocenyl ethyl)fluoren‐9‐one Modified Carbon Paste Electrode

A chemically modified carbon paste electrode with 2,7‐bis(ferrocenyl ethyl)fluoren‐9‐one (2,7‐BFEFMCPE) was employed to study the electrocatalytic oxidation of ascorbic acid in aqueous solution using cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The diffusion coefficient (D=1.89×10^?5 cm² s^?1), and the kinetic parameter such as the electron transfer coefficient, α (=0.42) of ascorbic acid oxidation at the surface of 2,7‐BFEFMCPE was determined using electrochemical approaches. It has been found that under an optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 300 mV less positive than that of an unmodified carbon paste electrode. The catalytic oxidation peak currents show a linear dependence on the ascorbic acid concentration and linear analytical curves were obtained in the ranges of 8.0×10^?5 M–2.0×10^?3 M and 3.1×10^?5 M–3.3×10^?3 M of ascorbic acid with correlation coefficients of 0.9980 and 0.9976 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2δ) were determined to be 2.9×10^?5 M and 9.0×10^?6 M with cyclic voltammetry and differential pulse voltammetry, respectively. This method was also examined for determination of ascorbic acid in pharmaceutical preparations.     

Studies of the electrochemical behavior of epinephrine at a homocysteine self-assembled electrode

The self-assembled electrode with the homocysteine monolayer (Hcy/Au) has been characterized by infrared spectroscopy and ac impedance spectroscopy in electrolyte. The Hcy/Au electrode is demonstrated to promote the electrochemical response of epinephrine (E) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k_s) is 2.1×10⁻² cm s⁻¹ at the self-assembled electrode. The reduction peak of E can be used to determine the concentration of E in presence of ascorbic acid (AA) owing to the Hcy/Au also promoting the electrochemical oxidation of AA.     

Synthesis and electrochemical properties of yttrium-doped LiMn<Subscript>0.98</Subscript>Y<Subscript>0.02</Subscript>O<Subscript>2</Subscript> for lithium secondary batteries

Yttrium-doped lithium manganese oxide (LiMn_0.98Y_0.02O₂) was prepared by ion exchange of lithium for sodium in NaMn_0.98Y_0.02O₂ precursors obtained by using rheological phase reaction method. This material had small particle size, which was composed of grain size of about 100 nm. Especially, LiMn_0.98Y_0.02O₂ delivered the initial discharge capacity of about 191 mA h g⁻¹ at room temperature when cycled between 2.0 and 4.4 V vs Li/Li⁺. Moreover, it showed an excellent cycling behavior, its specific capacity remained above 173 mA h g⁻¹ after 20 cycles, and the material did not transform into spinel structure during the electrochemical cycling according to the cyclic voltammograms and X-ray powder diffraction. The electrochemical results revealed that the doping of Y³⁺ improved the performance of LiMnO₂ considerably.     

铂电极上异黄樟油和胡椒醛电氧化的SERS研究

采用循环伏安(CV)法和原位表面增强拉曼光谱(SERS)技术, 研究了非水体系中反应物异黄樟油和目标产物胡椒醛在粗糙铂电极上的电氧化行为, 发现胡椒醛在电位≥1.50 V时将进一步氧化, 而且从分子水平证实, 在胡椒醛的氧化电位(≥1.50 V) 下, 波长为632.8 nm的激光对胡椒醛的氧化有助催化作用. 由异黄樟油直接电氧化合成胡椒醛的电位(E)应控制在1.20 V相似文献   

Electrochemistry and complexation of Josiphos ligands

The oxidative electrochemistry of 11 chiral bis-phosphinoferrocene ligands, all within the Josiphos class of ligands, was examined in methylene chloride. The oxidation of these ligands displays multiple waves of varying chemical reversibility. Palladium(II) and platinum(II) complexes with the general formula [MCl₂(P-P)] (M = Pd or Pt; P-P = Josiphos) were prepared, characterized by NMR and cyclic voltammetry. The electrochemistry simplifies greatly upon coordination of the Josiphos ligands. The X-ray structures of a palladium(II) and platinum(II) complex of the same Josiphos ligand are reported.     

Characterization and Applications of a Bismuth Bulk Electrode

A bismuth bulk electrode (BiBE), a new solid‐state electrode, is presented. The polycrystalline metal bismuth disk‐shaped electrode was examined for its anodic stripping voltammetry performance, which was found to be well comparable to that achieved with the bismuth or mercury film electrodes. Useful potential windows of the BiBE in aqueous solutions of pH 1 to 13 were found to range from approximately ?1.7 to ?0.1 V, depending on pH, where either hydrogen evolution or anodic dissolution of metallic bismuth limit the electrochemical inertness of the BiBE. Employing cyclic voltammetry (CV), the cathodic behavior of the BiBE was examined by testing inorganic (cadmium(II) ions) and organic (2‐nitrophenol) model compounds; a CV quasi‐reversible behavior was recorded in the case of the Cd(II)‐Cd(0) couple. The characteristics of the BiBE under anodic conditions, i.e., at bismuth surface coated with a thin conductive Bi₂O₃ film, was examined by testing two well‐established redox systems, potassium hexacyanoferate(III) and ruthenium(III) hexaaminechloride; a nearly reversible behavior was recorded in the latter case. Based on the presented preliminary results, BiBE can be considered as an interesting alternative to common solid and (toxic) mercury electrodes for possible use in electrochemical studies and electroanalytical applications.     

Vibrational spectroscopic detection of H-bonded β- and γ-turns in cyclic peptides and glycopeptides

The conformation of N-glycoproteins and N-glycopeptides has been the subject of many spectroscopic studies over the past decades. However, except for some preliminary data, no detailed study on the vibrational spectroscopy of glycosylated peptides has been published until recently.

This paper reports FTIR spectroscopic properties in DMSO and TFE of the N-glycosylated cyclic peptides cyclo[Gly-Pro-Xxx(GlcNAc)-Gly-δ-Ava] 3a and 3b in comparison with data on the non-glycosylated parent peptides cyclo(Gly-Pro-Xxx-Gly-δ-Ava) 2a and 2b [a, Xxx = Asn; b, Xxx = Gln; δ-Ava = NH-(CH₂)₄-CO] and N-acetyl 2-acetamido-2-deoxy-β- -gluco pyranosylamine (GlcNAc-NHAc, 4). The assignment of amide I band frequencies to conformation is based on ROESY experiments and determination of the temperature coefficients in DMSO-d₆ solution. (For the synthesis and NMR characterization of 2a and 3a see Ref. [19].)

Cyclic peptides are expected to adopt folded (β- and/or γ-turn) conformations which may be fixed by intramolecular H-bonding(s). A comparison of the temperature coefficients of the NH protons and amide I band frequencies and intensities suggests that in DMSO there is no significant difference in the backbone conformation and H-bond system of the N-glycosylated models and their parent cyclic peptides. The common feature of the backbone conformation of models 2 and 3 is the predominance of a 1 ← 4 (C₁₀) H-bonded type II β-turn encompassing Pro-Xxx or Pro-Xxx(GlcNAc), respectively. The ROESY connectivities in the Asn(GlcNAc) model (3a) have not been found to reflect intramolecular H-bondings between the peptide and the sugar.

The unique feature of the FTIR spectra in DMSO of the cyclic models is the lack or weakness of low-frequency (< 1640 cm⁻¹) amide I component bands. In TFE the amide I region of the FTIR spectra shows an increased number of components below 1650 cm⁻¹ reflecting a mixture of open and H-bonded β- and γ-turn conformers.

Because of its destabilizing effect upon γ-turns and other weakly H-bonded structures, DMSO decreases the number of backbone conformers. DMSO also destroys side-chain-backbone H-bondings of type C₇, C₆ or C₈. Possible ‘glyco’ C₇ H-bondings in GlcNAc-NHAc (4) or in glycopeptides 3a and 3b cannot resist the effect of DMSO either.

The FTIR data in TFE of models 2–4 suggest that the acceptor amide group of strong C₇ H-bondings in peptides and glycopeptides absorbs at 1630 ± 5 cm⁻¹ and that of bifurcated H-bondings between 1600–1620 cm⁻¹.     

Voltammetric behavior and determination of bismuth on sodium humate modified carbon paste electrode

The preconcentration and voltammetric behavior of Bi^III on a sodium humate modified carbon paste electrode was studied by means of cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV). The proposed measurement involves an initial nonelectrolytic preconcentration step in which Bi^III is complexed by the surface modifier in a solution of 0.05 M KNO₃-0.0106 M HNO₃ (pH 2.0) and a subsequent electrochemical scan step in which the preconcentrated Bi^III was reduced and then oxidized promptly in supporting electrolyte of 0.5 M HNO₃. The resulting DPSV anodic current was proportional to the concentration of Bi^III ion over the range of 4.78 × 10⁻⁸–1.44 × 10⁻⁵ M. The detection limit was 4.78 × 10⁻⁸ M. The proposed method was used to determine bismuth in various samples. Various factors affecting the electrode behavior were also investigated at the same time.