Low temperature structural phase transition in hafnium and zirconium tetrafluoride trihydrates

From time-differential perturbed angular correlation (TDPAC) measurements, the monoclinic and triclinic crystal structures in hafnium and zirconium tetrafluoride trihydrates are found to be present simultaneously in both the compounds. From previous TDPAC and XRD investigations, a monoclinic crystal structure for HfF₄·3H₂O but, for its analogues zirconium compound, a triclinic structure was reported. Contrary to earlier reports, the triclinic fraction in HfF₄·3H₂O is found to be maximum (80%) at room temperature. In fact, the triclinic crystal structure of HfF₄·3H₂O is reported here which was not known prior to this report. In ZrF₄·3H₂O, a strong signal (80–90%) for the triclinic structure is found at room temperature while the monoclinic fraction appears as a weak signal (10–15%). Structural phase transitions in these trihydrate compounds have been observed in the temperature range 298–333 K.     

Low-density carbon material modified with pyrolytic carbon

Here we report a physicochemical investigation of low-density carbon materials modified with pyrolytic carbon (PC). Exfoliated graphite (EG) obtained by nitrate expandable graphite thermal destruction was pressed into low-density graphite materials (LDGMs) with densities of 0.045-0.50 g/cm³ and saturated with PC by impact CVI technique. LDGM infiltration with PC leads to sample weight and density growth. The amount of deposited PC strictly depends on synthesis conditions. The maximum surface and volume deposition of PC occurred for samples with density of 0.05 g/cm³. XRD, Raman spectroscopy and scanning electron microscopy revealed that the deposited PC is of smooth laminar (SL) type. Composite thermal conductivity is about 2-3.5 Wt/m K.     

Growth of large La2−xSrxCuO4 single crystals using tilting-mirror-type infrared heating image furnace

Large single crystals of La_2−xSr_xCuO₄ (LSCO) high-T_c superconductors were grown by the infrared heating floating zone (IR-FZ) method using a tilting-mirror-type image furnace. The maximum diameter of the LSCO crystals increased to 10 mm in the tilting-mirror-type image furnace from 6 mm in the conventional image furnace. CuO rich feeds were required for the crystal growth using the tilting-mirror-type image furnace to compensate for the lack of CuO caused by the significant evaporation of CuO during the growth. The evaporation of CuO was affected by the tilting angle of the mirrors of the image furnace and by feed diameter. The optimized growth conditions were as follows: mirror tilting angle, 20°; feed diameter, 10 mm∅; and feed composition 50.7 mol% CuO.     

Enhanced sonochemical degradation of azure B dye by the electroFenton process

The degradation of azure B dye (C₁₅H₁₆ClN₃S; AB) has been studied by Fenton, sonolysis and sono-electroFenton processes employing ultrasound at 23 kHz and the electrogeneration of H₂O₂ at the reticulated vitreous carbon electrode. It was found that the dye degradation followed apparent first-order kinetics in all the degradation processes tested. The rate constant was affected by both the pH of the solution and initial concentration of Fe²⁺, with the highest degradation obtained at pH between 2.6 and 3. The first-order rate constant decreased in the following order: sono-electroFenton > Fenton > sonolysis. The rate constant for AB degradation by sono-electroFenton is ∼10-fold that of sonolysis and ∼2-fold the one obtained by Fenton under silent conditions. The chemical oxygen demand was abated ∼68% and ∼85% by Fenton and sono-electroFenton respectively, achieving AB concentration removal over 90% with both processes.     

Polystyrene-co-maleic acid/CdS nanocomposites: Preparation and properties

Composites of CdS nanoparticles confined in a polystyrene-co-maleic acid (PS-co-MAc) matrix have been prepared and characterized. It was shown that the acid groups of the co-polymer could be successfully used to control the aggregation of the nanoparticles, because they act as coordinate sites for Cd ions. UV-VIS measurements showed a blue shift of the absorption threshold, proving the presence of nanoparticles. An average size of the nanoparticles of about 4 nm is estimated from the change in band gap energy. Although the FTIR spectrum of the nanocomposite showed the presence of C-S bonds, a broad emission originating from surface recombination sites are noticed. DSC and TGA measurements revealed changes in thermal properties upon incorporation of nanoparticles. No thermal transition was observed in the nanocomposite, while the pure co-polymer exhibits a glass transition at 190 °C. In the presence of nanoparticles the onset of the thermal decomposition of the matrix is also shifted by 50 °C towards a higher temperature.     

A Fluorescent Probe for Diacetyl Detection

A water-soluble fluorescent probe, rhodamine B hydrazide (RBH), was prepared and its properties for recognition of diacetyl were studied. The method employs the reaction of diacetyl with RBH, a colorless and non-fluorescent rhodamine B spiro form derivative to give a pink-colored fluorescent substance. In weakly acidic media, RBH reacts more selectively with diacetyl than with other carbonyls, causing a large increase in fluorescence intensity and thereby providing an easy assay for the determination of diacetyl.     

On the oscillons in the signum-Gordon model

New periodic solutions of signum-Gordon equation are presented. We first find solutions φ₀(x, t) defined for (x, t) ∈ ? × [0, T ] and satisfying the condition φ₀(x, 0) = φ₀(x, T ) = 0. Then these solutions are extended to the whole spacetime by using (2.4).     

Effects of Nb substitution for Zr on the phases,microstructure and magnetic properties of Co80Zr18−xNbxB2 melt-spun ribbons

The phases, microstructure, and magnetic properties of Co₈₀Zr_18−xNb_xB₂ (x=1, 2, 3, and 4) melt-spun ribbons were investigated. The small substitution of Nb for Zr in the Co–Zr–B melt-spun ribbons resulted in the improvement of magnetic properties, especially the coercivity. The main effect of added Nb on the coercovity of Co–Zr–Nb–B melt-spun ribbons, originated from modification of the grain size of Co₁₁Zr₂ phase. The coercivity of the Co–Zr–Nb–B melt-spun ribbons depends on the annealing temperature. The optimal magnetic properties of H_c=5.1 kOe, and (BH)_max=3.4 MGOe were obtained in the Co₈₀Zr₁₅Nb₃B₂ melt-spun ribbons annealed at 600 °C for 3 min.     

Complexed sol-gel synthesis of improved Pt-Ru-Os-based anode electro-catalysts for direct methanol fuel cells

A high specific surface area (SSA) Pt-Ru-Os-based anode catalyst synthesized by a novel complexed sol-gel (CSG) process shows better catalytic activity in comparison to pure equi-atomic compositions of Pt-Ru anode catalysts synthesized by similar sol-gel processes. A homogeneous amorphous gel was successfully synthesized by complexing platinum(II) acetylacetonate, ruthenium(III) acetylacetonate and osmium(III) chloride with tetramethylammonium hydroxide (TMAH) used as a complexing agent. Phase-pure Pt(Ru,Os) and Pt(Ru) solid solutions possessing high specific surface area (∼110-120 m²/g) were successfully synthesized by controlled removal of carbonaceous species present in the as-prepared precursor generated from the CSG process. This has been successfully achieved by precise thermal treatments of the precursor using controlled oxidizing atmospheres. Results indicate that the nano-crystalline Pt(Ru,Os) solid solution of nominal composition 50 at%-Pt-40 at% Ru-10 at% Os possesses good chemical homogeneity, and reveals excellent catalytic activity, thus demonstrating the potential of the novel CSG process for synthesizing high-performance Pt-Ru-Os-based catalysts for direct methanol fuel cells.     

Characterization of new-layered Cr(III)-doped chlorocadmiumphosphate, Cd(HPO4)Cl·[H3N(CH2)6NH3]0.5 crystal by EPR and optical studies

Cr(III)-doped Cd(HPO₄)Cl·[H₃N(CH₂)₆NH₃]_0.5, a new-layered cadmium phosphate, is synthesized in acidic condition at room temperature. EPR and optical studies are carried out at room temperature. Polycrystalline EPR spectrum reveals the presence of two sites of Cr(III) ions in this layered phosphate lattice with zero-field splitting values of 24.24 and 7.65 mT, indicating that Cr(III) ions are in distorted octahedral sites. The optical absorption spectrum of the sample indicates near octahedral symmetry for the dopant ions. Crystal field, inter-electronic and bonding parameters are evaluated by collaborating EPR and optical data. The evaluated parameters suggest the mode of entry of Cr(III) ion into the layered phosphate as interstitial site, and bonding between the metal and ligand is partially covalent.