一维亚微米多钼酸盐形貌可控合成及氧的电催化还原研究

通过调节反应pH值和反应物种实现了一维亚微米多钼酸盐的控制合成,以钼酸铵和十二烷基苯磺酸钠为原料,在pH=6时制备出亚微米线,在pH=2时制备出亚微米棒,而以钼酸铵和氯化钠为原料,在pH=6时制备出纳米带.在pH=6时,纳米材料在长胶束内生长成亚微米线,而pH值降低至2时,过多的H＋不仅会形成大量的Mo3O102-,还会使得胶束变短,因此使得亚微米材料变短,成为亚微米棒.在没有模板剂十二烷基苯磺酸钠时,多钼酸铵就会长成结构更为稳定的纳米带.循环伏安测试结果表明在有机溶剂中,多钼酸盐的亚微米棒对氧电催化还原具有优异活性.研究表明,由于有机醇能与电解质溶液中的H＋反应,因此有机醇能显著促进一维多钼酸盐亚微米材料的氧的电催化活性.     

粒子与聚合物协同稳定高内相Pickering乳液

选用二氧化硅纳米粒子(H30)和聚(乳酸-羟基乙酸)共聚物(PLGA)为复合稳定剂, 成功制备出内相体积分数高达90%的高内相Pickering 乳液. 对照实验表明: 单独用H30粒子作稳定剂, 内相体积分数上限为75%; 单独用PLGA 作稳定剂, 发生严重相分离, 不能形成乳液. 无机纳米粒子与聚合物之间的协同作用在制备高内相乳液的过程中起到了关键作用. 因此, 使用无机粒子和聚合物作为混合稳定剂制备高内相乳液是一种新型而有效的方法.     

高效液相色谱-串联质谱法测定食品中维生素D_2和维生素D_3

提出了食品中维生素D2和维生素D3的高效液相色谱-串联质谱分析方法。食品样品经氢氧化钾皂化后乙醚萃取,所得有机相经无水硫酸钠除水后蒸发至干。用1 mL乙醇溶解后经Agilent Zorbax XDB C18色谱柱(2.1 mm×50 mm,3.5μm)分离,用甲-醇10 mmol·L-1乙酸铵溶液(90+10)的混合溶液洗脱,采用电喷雾正离子模式多反应监测。维生素D2和维生素D3的线性范围均为50~500μg·L-1,检出限(3S/N)均为10μg·L-1。方法应用于测定奶粉和酸酸乳中维生素D2和维生素D3,回收率在76.8%~83.9%之间。     

Effects of dynamical couplings in hydrogen bond systems in the polarized IR spectra of 3-hydroxybenzaldehyde and 4-hydroxybenzaldehyde crystals

This paper presents the investigation results of the polarized IR spectra of 3-hydroxybenzaldehyde and 4-hydroxybenzaldehyde crystals measured at 293 and 77 K. Analysis of the results concerned the linear dichroic, H/D isotopic and temperature effects observed in the spectra of the hydrogen and deuterium bond at the frequency ranges of the ν_O–H and the ν_O–D bands, respectively. The main spectral properties of the crystals were interpreted in terms of the “strong-coupling” theory on the basis of the hydrogen bond dimer model. The spectra revealed that the strongest vibrational exciton coupling involved the closely-spaced hydrogen bonds, each belonging to a different chain of associated molecules. The reason for two different crystalline systems, are characterized by almost identical ν_O–H and ν_O–D band shapes, is explained. It was proved that a random distribution of the protons and deuterons took place in the lattices of the isotopically diluted crystals.     

从纳米晶到三维超晶格结构

纳米晶的有序组装对未来纳米材料的应用拓展具有重要意义. 本综述介绍了纳米晶三维超晶格的研究价值以及制备方法,着重对“胶体溶液蒸发”、“不良溶剂扩散”、“胶束引导集聚”、“氢键连接”、“静电聚集”、“DNA导向”、“外场辅助”和“水－油界面辅助”的组装机制进行了总结与评述,同时也探讨了这一新兴领域中仍然存在的挑战.     

核磁共振谱研究PAA-F108-PAA 嵌段共聚物的胶束化行为

采用原子转移自由基聚合伴随水解的方法合成了聚丙烯酸-聚醚嵌段共聚物(PAA-F108-PAA), 并通过氢核磁共振波谱和二维核Overhauser效应谱(2D NOE)研究了温度、 羧酸基团中和度(α)及盐浓度对PAA-F108-PAA嵌段共聚物在水溶液中胶束化行为的影响. 结果表明, PAA-F108-PAA分子的临界胶束化温度受α影响较小, 受盐的种类和浓度影响较大. 当α=0.14(0.01 mol/L KCl)时, 在6 ℃条件下, PAA-F108-PAA分子处于塌缩状态, 而在60 ℃条件下, 聚氧化丙烯(PPO)链段发生疏水聚集形成胶束的核, PAA链段与PEO链段相互作用形成胶束的壳; 当α=0.80(0.01 mol/L KCl)时, 在6 ℃条件下, PAA-F108-PAA分子处于相对伸展状态, 而在60 ℃条件下, PPO链段仍发生疏水聚集形成胶束的核, PEO与PAA彼此分离形成胶束的壳. 增加KCl的浓度至1 mol/L, PAA-F108-PAA分子的临界胶束化温度显著降低, KCl对PPO和PEO链段都表现出脱水作用. 但KI的浓度增加至1 mol/L时, PAA-F108-PAA分子的临界胶束化温度仅略微增加, KI对PPO链段表现出脱水作用, 而对PEO链段表现出增溶作用.     

Syntheses,Structures, and Properties of the 3D Lanthanide Organic Frameworks with N‐Heterocyclic Polycarboxylic Acids

Four 3D lanthanide organic frameworks from potassium pyrazine‐2, 3, 5, 6‐tetracarboxylate (K₄pztc) or potassium pyridine‐2, 3, 5, 6‐tetracarboxylate (K₄pdtc), namely, {[KEu(pztc)(H₂O)₂] · H₂O}_n ( 1 ), {[KTb(pztc)(H₂O)₂] · 1.25H₂O}_n ( 2 ), {[KLn(pdtc)(H₂O)] · H₂O}_n [Ln = Gd ( 3 ), Ho ( 4 )], were synthesized by reaction of the corresponding lanthanide oxides with K₄pztc or K₄pdtc in presence of HCl under hydrothermal conditions, and characterized by elemental analysis, TGA, IR and fluorescence spectroscopy as well as X‐ray diffraction. In complexes 1 and 2 , the dodecadentate chelator pztc^4– links four Ln^III ions and four K^I ions. The coordination mode of the pztc^4– ligand is reported for the first time herein. Complexes 3 and 4 are isostructural with earlier reported Nd, Dy, Er complexes. Moreover, the Eu^III and Tb^III complexes exhibit the characteristic luminescence.     

Morphological and dimensional control via assembly of polyaniline crystals

A facile and general route to a new generation of polyaniline(PANI)-citric acid(CA) crystals such as 2D nanoplates, 2D nanosheets and 3D microrods self-assembled by the π-π stacking interaction is reported. Dramatic, 3D rectangular shaped microrods and 2D nanosheets are single crystals indicated by SAED patterns and HRTEM images. Moreover, the method does not depend on any specific equipment or heating, cooling and complex procedures. The novel polyaniline crystals will be useful for next generation organic electronics such as nano-transistors.     

两个三维柔性功能化双苯并咪唑金属N-杂环卡宾的合成和结构

由1,1'-双苄基-3,3'-氧双(亚乙基-2,1)-二苯并咪唑六氟磷酸盐(L1)和1,1'-双(吡啶-2-甲基)-3,3'-氧双(亚乙基-2,1)-二苯并咪唑六氟磷酸盐(L2)为配体合成了[Hg(C₃₂H₂₈N₄O)](CH₃COO)(PF₆)₂(1)和[NiCl(C₃₀H₂₈N₆O)](PF₆)₂(2),并对其进行了结构表征。配合物1是一个罕见的三价态Hg配合物,为单斜晶系P2₁/c空间群,配合物2为单斜晶系P2₁/n的配合物。1和2中存在O-H…F,C-H…F,C-H…Cl,C-H…π,P-F…π氢键作用和π-π堆积作用,并以此分别形成了3D超分子结构。     

2-丙基-1H-4，5-咪唑二酸构筑的镉(Ⅱ)配位聚合物的合成、晶体结构、形貌及荧光性质

通过水热方法 ,采用H3pimda(2-propyl-1H-imidazole-4,5-dicarboxylic acid)与CdSO4.8/3H2O和Nd2O3反应,合成了1个具有一维孔道的配位聚合物[Cd(H2pimda)2]n(1),并对其结构和荧光性质进行了研究。结构分析结果表明该聚合物的晶体属于单斜晶系,P21/n空间群。4个H2pimda-配体桥联4个镉(Ⅱ)离子形成了1个方环,这些环通过镉(Ⅱ)离子与H2pimda-配体的配位作用形成了1个具有一维孔道的三维框架结构。值得关注的是配合物1的晶体呈现一种微米管的外型。研究表明,该聚合物中在室温下能发出很强的兰色荧光。