Hydrolysis of 7,7-Substituted Derivatives of 3-tert-Butyl-3,4-dihydro-2H-thiazolo-[3,2-a][1,3,5]triazin-6(7H)-one

Alkaline hydrolysis of 3-tert-butyl-7,7-bis(hydroxymethyl)-3,4-dihydro-2H-thiazolo[3,2-a][1,3,5]-triazin-6(7H)-one can occur in three directions: with cleavage of the tetrahydrotriazine ring, with cleavage of the thiazolidine ring, and also with opening of both rings. Depending on the process conditions, either the hydrolysis product corresponding to the first direction or the hydrolytic decomposition products corresponding to the second and third directions can be obtained in preparative quantities. Hydrolysis of 3,3′-di-tert-butyl-3′,4′-dihydro-2′ H-spiro[(perhydro-1,3-oxazine)-5,7′-thiazolo[3,2-a][1,3,5]triazin]-6′-one in (NH₄)₂CO₃ solution occurs in two steps: in the first step, cleavage of the tetrahydrotriazine ring occurs; and in the second step, opening of the perhydrooxazine ring occurs. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1089–1097, July, 2005.     

NMR determination of enantiomeric composition of 1-substituted 3-amino-1,2-dicarba-closo-dodecaboranes using Eu(hfc)3

Experimental conditions for determination of enantiomeric composition of 1-substituted 3-aminocarboranes by ¹H and ¹³C NMR spectroscopy using chiral shift reagent Eu(hfc)₃ have been found.     

Convenient synthesis of arylpropargyl aldehydes and 4-aryl-3-butyn-2-ones from arylacetylenes and amide acetals

The reaction of arylacetylenes 1 and N,N-dimethylformamide dimethylacetal (2a, DMF-DMA) afforded the corresponding arylpropargyl aldehydes 3 in moderate yields. Similarly, the reaction of 1 and N,N-dimethylacetamide dimethylacetal (2b, DMA-DMA) gave 4-aryl-3-butyn-2-ones 4.     

Synthesis and Liquid Crystalline Properties of 3-Substituted Pentane-2,4-dione, Pyrazole and Isoxazole Derivatives

The γ-substituted β-diketonate 2,4-dioxo-3-pentyl 4-[4-（n-octyloxy）cinnamoyl]oxybenzoate 1 and its pyrazole and isoxazole derivatives （2 and 3 respectively） have been synthesized and characterized by the spectroscopic methods and elemental analysis. The mesogenic properties of these compounds have been studied by polarizing optical microscopy （POM） and differential scanning calorimetry （DSC）. A monotropic nematic mesophase was observed for the β-diketonate 1, in contrast, the pyrazole 2 displays an enantiotropic smectic A and isoxazole 3 exhibits an enantiotropic nematic mesophase. The relationship between the structure and liquid crystalline properties has also been discussed.     

Synthesis and tautomeric transformations of 2-(tert-butyl)-1,2,4-benzotriazine-3(2H)-thiones

Treatment of 2-(tert-butyl)-1,2,3,4-benzotetrazinium tetrafluoroborates with sodium thiocyanate afforded 2-(tert-butylazo)phenyl isothiocyanates 3, which exist in equilibrium with 2-(tert-butyl)-1,2,4-benzotriazine-3(2H)-thiones 3′. The equilibrium depends on the substituents R in the benzene ring: the percentage of the open isomer 3 is about 20% for R = H or Me; for R = Cl or Br, the equilibrium is completely shifted to cyclic isomer 3′. The equilibrium is slow on the time scale of the ¹H and ¹³C NMR experiments. For compounds 3a/3′a (R = H), the spectra at 24 °C show two sets of signals, while those at 0 °C contain only signals for isomer 3′a. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1192–1195, July, 2006.     

TheSemmler-Wolff aromatization andSchmidt reaction applied to some pyrido[2′,3′:3,4]pyrazolo[5,1-c][1,2,4]benzotriazines

Pyrido[2,3:3,4]pyrazolo[5,1-c][1,2,4]benzotriazin-4(1H)ones were transformed via their oximes in aSemmler-Wolff aromatization process in the tetracyclic heteroaromatic amines4 or bySchmidt reaction into a mixture of the same amine4 and a ring enlarged lactam3. Syntheses of some halo pyrazolo[3,4-b]pyridines and a photochemical transformation of 3-azidopyrazolo[3,4-b]pyridine are also described.

---

Über dieSemmler-Wolff- undSchmidt-Reaktion einiger Pyrido[2,3:3,4]pyrazolo[5,1-c][1,2,4]benzotriazine

Zusammenfassung Pyrido[23:3,4]pyrazolo[5,1-c][1,2,4]benzotriazin-4(1H)one werden über Oxime in einerSemmler-Wolff-Reaktion in die tetracyklischen aromatischen Amine4 umgewandelt. In einerSchmidt-Reaktion wurden dieselben Ketone in ein Gemisch aus Amin4 und Lactam3 übergeführt. Synthesen von halogensubstituierten Pyrazolo[3,4-b]pyridinen und photochemische Umwandlung von 3-Azidopyrazolo[3,4-b]pyridin werden beschrieben.

     

Synthesis of PbTiO3 ceramics using mechanical alloying and solid state sintering

The pressure-less sintering behavior of PbTiO₃ powders synthesized by mechanical alloying TiO₂ and PbO was investigated using dilatometry and Rietveld refinements of X-ray diffraction patterns. As-synthesized, the powders are nanocrystalline with a mean particle size of 20 nm. Pressure-less sintering in the range 500-1050°C gives single phase ceramics with densities of 85-90% and crystallite sizes in the range 80-400 nm. Cracking due to the paraelectric-ferroelectric phase transition was not observed in samples sintered below 700°C due to the small crystallite size whereas macroscopic cracks formed in samples sintered above 700°C. Rietveld analysis indicates the formation of Pb vacancies in samples sintered and held for 24 h at intermediate temperatures (600-1000°C) which gives some insight into the mechanism of Pb loss and second phase formation in this system.     

Phase transitions in ternary caesium lead bromide

Phase transitions in ternary caesium lead bromide (CsPbBr₃) were studied by means of DSC, TMA and high temperature X-ray diffraction. The samples were prepared from the solution by water evaporation and from the melt. on the DSC curves as well as on the temperature dependence of the lattice constants of CsPbBr₃ only two effects were found belonging to the earlier published phase transitions at 88 and 130°C and no further effects. Linear thermal expansion coefficient α of individual CsPbBr₃ modifications were calculated from both TMA and high temperature X-ray diffraction. The structural parameters of the room temperature orthorhombic phase were refined and the results are presented. CsPbBr₃ prepared from the solution contained about 10% of CsPb₂Br₅ and so the DSC curve of pure CsPb₂Br₅ was also measured and an effect at a temperature of 68.5°C was found. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Enhancement of Efficiency of High-order Harmonic in Intense Laser Field Based on Asymptotic Boundary Conditions and Symplectic Algorithm

Asymptotic boundary condition (ABC) of laser-atom interaction presented recently is applied to transform the initial value problem of the time-dependent Schrödinger equation (TDSE) in infinite space into the initial and boundary value problem in the finite space, and then the TDSE is discretized into linear canonical equations by substituting the symmetry difference quotient for the 2-order partial derivative. The canonical equation is solved by symplectic algorithm. The ground state and the equal weight coherent superposition of the ground state and the first excited state have been taken as the initial conditions, respectively, while we calculate the population of bound states, the evolution of average distance and the high-order harmonic generation (HHG). The conversion efficiency of HHG can be enhanced by initial coherent superposition state and moderate laser intensities     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.