Solid state coordination chemistry of copper(II)/α-hydroxycarboxylato/2,2′-bipyridine systems

Four new two-ligand complexes of copper(II) with 2,2′-bipyridine and one of three different α-hydroxycarboxylic acids (lactic, H₂LACO; 2-methyllactic, H₂MLACO; and mandelic, H₂MANO) were prepared. Complexes 1–3 of general formula [Cu(HL)₂(bipy)]·nH₂O (HL=monodeprotonated acid), were characterized by elemental analysis, IR, electronic and EPR spectroscopy, magnetic measurements and thermogravimetric analysis. Complexes 1 (HL=HLACO, n=2), 2 (HL=HMLACO, n=1) and 3a (the result of attempted recrystallization of 3, of formula [Cu(HMANO)(bipy)₂](HMANO)·H₂MANO·CH₃CN were studied by X-ray diffractometry. The copper atom is in an elongated, tetragonally distorted octahedral environment in 1 and 2 and in 3a has a coordination polyhedron intermediate between a square pyramid and a trigonal bipyramid, as evaluated in terms of the parameter τ. In 1 and 2 the α-hydroxycarboxylato ligand is bidentate and monoanionic but in 3a there are three forms: a monodentate monoanion, a monoanionic counterion, and a neutral molecule.     

Darstellung, 19F-NMR-spektroskopischer Nachweis und Untersuchung zur Bildung der metallgemischten Clusteranionen [(Mo6−nWnCl)F]2−, n = 0−6

Preparation, ¹⁹F NMR Spectroscopic Evidence and Study of the Formation of Metal-Mixed Cluster Anions [(Mo_6?nW_nCl )F ]^2?, n = 0?6 The complete system of metal-mixed octahedral cluster ions [(Mo_6?nW_nCl)F]^2?, n = 0?6, is prepared by tempering Mo powder with WCl₆ at 600°C. A mixture containing inclusively the geometric isomers (n = 2, 3, 4) all ten possible species is transferred into the tetra-n-butylammonium salts (TBA)₂[(Mo_6?nW_nCl)F]. In the ¹⁹F nmr spectrum the 24 expected signals are observed, assigned on the basis of their chemical shifts, multiplicities and intensities, and confirmed by a 2D-¹⁹F-¹⁹F COSY spectrum. From the integrated intensities the distribution of the different components is derived revealing a non-statistical formation, in that isomers with Mo…?Mo or W…?W atoms in trans-positions in comparision to those with mixed Mo…?W axes are favoured, and that especially the homoleptic compounds Mo₆ and W₆ are present to an over-average extent. Evaluation of ¹⁹F chemical shifts reveals that F bound to W which is in antipodal position to Mo resonates at higher field compared to F bound to W in a W…?W arrangement, caused by an increased shielding, which is synonymous to a positive antipodal-effect by Mo. Vice versa F bound to Mo with an antipodal W resonates at lower field compared with F bound to Mo in an Mo…?Mo arrangement caused by an increased deshielding and synonymous a negative antipodal-effect by W. The chemical shifts, resulting from antipodal-effects, are different for the compounds within the [(Mo_6?nW_nCl)F]^2? - system. The difference of the antipodal effect of successive substitution products results in characteristic values designated as antipodal shift constants, depending on the kind of substituents, which is valid for other cluster systems, too.     

Reaction ofN-(3,3,3-trifluoro-2-trifluoromethylprop-1-enyl)dimethylamine with MgSO4·7H2O. Synthesis of 4,4-difluoro-5-trifluoromethyl-2-(2,2,2-trifluoro-1-trifluoromethylethyl)-4H-1,3-dioxine andcis/trans-3-dimethylamino-2-trifluoromethacryloyl fluoride

4,4-Difluoro-5-trifluoromethyl-2-(2,2,2-trifluoro-1-trifluoromethylethyl)-4H-1,3-dioxine andcis/trans-3-dimethylamino-2-trifluoromethacryloyl fluoride were obtained by reaction ofN-(3,3,3-trifluoro-2-trifluoromethylprop-1-enyl)dimethylamine with MgSO₄·7H₂O. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1069–1071, May, 1997.     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

~(14)N ENDOR Study on Bis(2-Hydroxylphenyl Ketoxime)-~(63)Cu(Ⅱ) Complex

The ENDOR spectrum of ~(14)N-~(63)Cu-HAP complex in DMSO/EtOH (5:1) freezing solution at 20 K has been studied using orientational selective method in this paper. The anisotropic superhyperfine coupling tensor and qusdrupole coupling tensor of ligand ~(14)N nucleus, and the superhyperfine coupling tensor of various ~1H nuclei have been measured precisely. Comparing the superhyperfine coupling tensor of ~(14)N-nucleus with previous work shows that the analytical method of spectrum is reasonable and the data are reliable in our previous work.     

Thermal analysis in the synthesis and crystal formation of oxides

Vapour phase treatment at elevated temperatures with an activating agent is an effective method of synthesis and purposeful modification of amorphous and fine-grained crystalline substances. In the systems amorphous silica-quartz and amorphous Al(OH)₃ -crystalline-Al₂O₃ different forms of bound water are of prime importance. DTA, TG, DSC, NMR¹H,²⁹Si,²⁷Al, IR spectroscopy, electron- and optical microscopy methods have been used. The interaction of water molecules with the base skeleton and with hydroxide groups on the surface and in the bulk of the silica is of primary significance for modification of the silica structure. The proportion of different forms of the bound water determines the integral evaporation enthalpy of water. Various properties of silica are determined by weak bound water in the surface layer of the material. In the sequence Al(OH)₃ —-Al₂O₃ the structure transformation is observed according to the following scheme:-Al(OH)₃ —-AlOOH- -Al₂O₃, which takes place during the vapour phase treatment with activator.

---

Zusammenfassung Eine Dampfphasenbehandlung bei höheren Temperaturen mit einem Aktivierungsmittel ist eine effektive Methode zur Synthese und zielgerichteten Modifizierung von amorphen und feinkörnigen kristallinen Substanzen. In den Systemen amorphes Siliziumdioxid-Quarz sowie amorphes Al(OH)₃-kristallines-Al₂O₃ hat verschiedenartig gebundenes Wasser eine primäre Bedeutung. Bei den Untersuchungen kamen DTA, TG, DSC,¹H-,²⁹Si-,²⁷Al-NMR, IR-Spektroskopie sowie Elektronen- und optische Mikroskopie zur Anwendung. Die Wechselwirkung von Wassermolekülen mit dem Grundgerüst und mit Hydroxidgruppen an der Oberfläche und im Innern von Silika ist für die Modifizierung der Silikastruktur von primärer Bedeutung. Der Anteil der verschiedenartig gebundenen Wasserformen bestimmt die vollständige Verdampfungsenthalpie des Wassers. Die verschiedenen Eigenschaften von Silika werden durch schwach gebundenes Wasser in der Oberflächenschicht der Substanz bestimmt. Die Umwandlung Al(OH)₃ —-Al₂O₃ durchläuft folgendes Schema:-Al(OH)₃--AlOOH--Al₂O₃, nach dem der Vorgang bei der Gasphasenbehandlung mit Aktivator abläuft.

     

A method for correcting the contact angle from the θ/2 method

The θ/2 method, a widely used technique on measuring the contact angle of a sessile drop, assumes that the drop profile is part of a sphere. However, the shape profile of a sessile drop is governed by the Young–Laplace equation and is different from a sphere, especially for drops with a large bound number (e.g. large volume or small surface tension). The spherical assumption, therefore, causes errors on evaluating the contact angles. The deviation of contact angle from the θ/2 method is evaluated from a theoretical calculation in this work. A simple means is given for correcting the measurement error. The corrected angle results from the drop volume, surface tension, liquid density and the contact angle from θ/2 method. An algorithm for finding the correct contact angle without knowing the density and surface tension is also given. At the end, two examples of pendant drops are given for the illustration.     

The Comparison of the Orientation of Sodium 3-Hydroxy-2-Naphthalenecarboxylate in the Cavity of β-Cyclodextrin and Heptakis-(2,3,6-Tri-O-Methyl)-β-Cyclodextrin

Conformational analysis of inclusion complexes of sodium 3-hydroxy-2-naphthalenecarboxylate with -cyclodextrin and heptakis-(2,3,6-tri-o-methyl)--cyclodextrin in D₂O was investigated by 1D and 2D ¹HNMR measurements. The results show that part of the naphthyl group of sodium 3-hydroxy-2-naphthalenecarboxylate is situated in the 2,3-OH side of the -cyclodextrin cavity asymmetrically while the whole naphthyl group is included in the heptakis-(2,3,6-tri-o-methyl)--cyclodextrin cavity with the caboxylate and hydroxy group close to the 6-OCH₃ group.     

New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.