The use of trans-2,3-divinyl epoxides as precursors to carbonyl ylides

trans-2,3-Divinyl epoxides have been found to be good substrates for the generation of carbonyl ylides in CCl₄ and 145 °C. These ylides, to a limited extent, undergo isomerization to cis-2,3-divinyl epoxides, leading to the isolation of 4,5-dihydrooxepins. Of greater potential usefulness is the finding that these ylides can be efficiently trapped in an intermolecular sense by a dipolarophile, leading to dihydrofurans.     

利用H2与金属氧化物的选择性反应从CO中除H2

研究了一些氧化物的H2－TPR及CO－TPR行为,结果发现,Co3O4／Al2O3,NiO／SiO2,NiO和Pd／NiO的H2－TPR温度要低于它们的CO－TPR温度,特别是Pd／NiO样品,它的H2－TPR温度为598K,而其CO－TPR温度高达949K,差别为351K,因此有可能利用Pd／NiO在一定温度下选择性地与CO中的H2反应而将其除去. 实验结果表明,Pd／NiO可在603K及4000h-1的条件下从H2（0.34％）,CO（50％）和N2（余）的混合气中选择性地除去90％以上的H2,吸氢容量为每克样品55mL标准态H2.     

Addition of diazocyclopropane generatedin situ to acrylic acid derivatives and transformations of resulting functionally substituted spiro(pyrazolinecyclopropanes)

The reaction of diazocyclopropane generatedin situ with acrylonitrile or methyl acrylate to give 1∶1, 1∶2, and 2∶1 cycloadducts was carried out. The products resulting from 1,3-dipolar cycloaddition and subsequent isomeriation,viz., 3-cyano- and 3-methoxycarbonylspiro(2-pyrazoline-5,1′-cyclopropanes), isolated in the first step in ∼70% yield, react in an alkaline solution with the above acrylates or diazocyclopropane as C(3)-nucleophiles to give the corresponding 3-(2′-cyanoethyl)-, 3-(2′-methoxycarbonylethyl)-, or 3-(cyclopropylazo)-1-pyrazolines. The thermal deazotization of these pyrazolines to spiropentane derivatives was investigated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 532–539, March, 1997.     

离子液体介导CO2化学转化研究进展

The efficient utilization of carbon dioxide (CO₂) as a C1 feedstock is of great significance for green and sustainable development. Therefore, the efficient chemical conversion of CO₂ into value-added products has recently attracted a lot of research attention in recent years. The transformation of CO₂ generally requires high-energy substrates, specific catalysts, and harsh reaction conditions due to its high thermodynamic stability and kinetic inertness. Consequently, several efforts have been dedicated toward the development of high-performance catalysts and new reaction routes for CO₂ conversion over the last few decades. To date, many routes of convert CO₂ into value-added chemicals have been proposed, together with the development of heterogeneous and homogeneous catalysts. Among the advanced catalysts reported to date, ionic liquids (ILs) have been widely investigated and show great potential for the efficient, selective, and economical conversion of CO₂ into highly valuable products under mild conditions, even under ambient conditions. Some task-specific ILs have been designed with unique functional groups (e.g., —OH, —SO₃H, —NH₂, —COOH, and —C≡N), which can act as the solvent, absorbent, activating agent, catalyst, or cocatalyst to realize the transformation of CO₂ under metal-free and mild conditions. In addition, a variety of catalytic systems composed of ILs and metal catalysts have also been reported for the transformation of CO₂, in which the combination of the IL and metal catalyst is responsible for CO₂ conversion with high efficiency. In this review article, we summarize the recent advances in IL-mediated CO₂ transformation into chemicals prepared via C—O, C—N, C—S, C—H, and C—C bond forming processes. ILs that can chemically capture CO₂ with high capacity are first introduced, which can activate CO₂ via the formation of IL-based carbonates or carbamates, thus realizing the transformation of CO₂ under metal-free and mild conditions. Recent progress in IL-mediated CO₂ transformations to form carbonates and various kinds of N- and S-containing compounds (e.g., oxazolidinones, ureas, benzimidazolones, formamides, methylamines, benzothiazoles, and other chemicals) as well as CO₂ hydrogenation to give formic acid, methane, acetic acid, low-carbon alcohols, and hydrocarbons has been summarized in this review with a focus on the reaction routes, catalytic systems, and reaction mechanism. In these reactions, ILs can simultaneously activate the substrate via strong H-bonding in addition to activating CO₂, and the cooperative effects among the ionic and molecular species and metal catalysts accomplish the reactions of CO₂ with various kinds of substrates to afford a wide range of value-added chemicals. Finally, the shortcomings and perspectives of ILs are discussed. In short, IL-mediated CO₂ transformations provide green and effective routes for the synthesis of high-value chemicals, which may have great potential for a wide range of applications.     

High-vacuum pyrolysis of 1,1,1-trifluoro-2-bromo-2-chloroethane. IR spectrum of 1,1,1-trifluoro-2-chloroethyl radical in an argon matrix

The products of high-vacuum pyrolysis of 1,1,1-trifluoro-2-bromo-2-chloroethane were studied by matrix IR spectroscopy. The decomposition of 1,1,1-trifluoro-2-bromo-2-chloroethane was shown to occur predominantlyvia two directions: to form the 1,1,1-trifluoro-2-chloroethyl radical and trifluoromethylcarbene isomerizing to trifluoroethylene. The CF₃CHCl radical has been detected in the matrix for the first time. The bands observed in the IR spectrum were calculated by the quantum-chemical B3LYP/6-311 G(d,p) method and assigned to normal vibrations of the radical. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2085–2088, October, 1998.     

Cleavage by halogens of carbon—cobalt bonds in organometallic complexes of cobalt(III) : III. Kinetics and mechanism of the reactions of organobis(dimethylglyoximato)cobalt(III) complexes with iodine in chloroform

The kinetics of the reaction between organocobaloximes, RCo(DH)₂H₂O, and iodine have been investigated. They reveal the participation of an RCo(DH)₂H₂O · I₂ intermediate which undergoes intramolecular transalkylation and acts as an electrophile towards a second organocobaloxime molecule. The trend in reactivity as the R group is varied is discussed.     

Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides

trans-RhCl(CO)(TPPTS)₂ (TPPTS=tris(m-sulfonatophenyl)phosphine) has been intercalated into Zn-Al layered double hydroxides (LDHs) by the method of ion exchange. The structure, composition and thermal stability of the composite material have been characterized by powder X-ray diffraction, Fourier transform infrared and ³¹P solid-state magic-angle spinning nuclear magnetic resonance spectroscopy, elemental analysis, thermogravimetry, and differential thermal analysis. The geometry of trans-RhCl(CO)(TPPTS)₂ was fully optimized using the PM3 semiempirical molecular orbital method, and a schematic model for the intercalated species has been proposed. The thermal stability of trans-RhCl(CO)(TPPTS)₂ is significantly enhanced by intercalation, which suggests that such materials may have prospective application as the basis of a supported catalyst system for the hydroformylation of higher olefins.     

ZrO2在Cu-ZnO-ZrO2甲醇水蒸汽重整制氢催化剂中的作用

通过对一系列Cu-ZnO-ZrO2甲醇水蒸汽重整(SRM)催化剂的XRD、TEM和BET表征及催化性能测定,研究催化剂中ZrO2对催化剂粒径、比表面以及对SRM反应性能的影响.结果表明,ZrO2的加入,使催化剂的粒径从15 nm降至10 nm（其中CuO和ZnO的平均粒径分别从7.7和10.4 nm降至3.9和8.7 nm）,BET比表面从60 m2•g－1增至78 m2•g－1.随着催化剂含ZrO2量不同,甲醇的转化率和H2、CO2的选择性均产生变化,当催化剂中Zr含量为24.0％(w),反应温度为220 ℃,水、醇摩尔比为1.3时,甲醇的转化率达到51.6％, H2和CO2的选择性达到100％(CO和CH4在产物气体中的体积分数小于10－4),这一结果对甲醇燃料电池甲醇重整器的应用具有重要的意义.     

Composite Electrode SnO2／TiO2 for Dye-Sensitized Solar Cells

Composite nanoporous electrode SnO2/TiO2 was fabricated for the dye sensitized solar cell (DSSC) with N3 (Cis-Ru). After introducing of TiO2, the open-circuit photovoltage (Voc) was higher than that of the pure SnO2 electrode, while short-circuit photocurrent (Isc) was varied with the ratio of the TiO2. Appropriate content of the TiO2 can be beneficial to the efficiency of the solar cell, and it gives negative impact on the composite electrode when the content of TiO2 is higher.     

稀土掺杂对锂离子电池正极材料LiMn2O4结构及电性能的影响

利用微波加热技术合成稀土掺杂基锂离子电池正极材料LiMn2-xRExO4(RE=Y，Nd，Gd，Ce)，通过XRD、循环伏安及恒电漉充放电测试研究了稀土掺杂离子对合成正极材料结构及电化学性能的影响。XRD测试结果表明，合适的掺杂量可以起到扩展锂离子脱嵌通道和稳定骨架结构的作用，稀土离子的引入可以部分取代原有的三价锰离子，由于稀土离子的离子半径较三价锰离子大，因此稀土掺杂锰酸锂材料的晶胞参数比未掺杂材料大，在一定程度上扩充了锂离子迁移的三维通道，更有利于锂离子的嵌入与脱嵌；循环伏安及恒电漉充放电测试结果表明稀土掺杂有效提高了LiMn2O4材料的电化学循环可逆性及循环稳定性。