Difficulties in the growth and characterization of non-linear optical materials: A case study of salts of amino acids

In the crystallographic literature, there is an ever-increasing number of publications on crystals that are referred to as ‘new non-linear optical materials’, many of them reporting salts of amino acids. However, the term NLO material is used improperly in most cases. In fact, the establishment of any crystal species as such a material requires several experimental and computational procedures, which are seldom satisfied when characterizing a supposedly new species. Here, some frequent hazards and problems are addressed and observations of papers reporting amino acid compounds as supposedly new NLO materials are made.     

Extended defects in CdZnTe crystals: Effects on device performance

We explored some unique defects in a batch of cadmium zinc telluride (CdZnTe) crystals, along with dislocations and Te-rich decorated features, revealed by chemical etching. We extensively investigated these distinctive imperfections in the crystals to identify their origin, dimensions, and distribution in the bulk material. We estimated that these features ranged from 50 to 500 μm in diameter, and their depth was about ∼300 μm. The density of these features ranged between 2×10² and 1×10³ per cm³. We elaborated a model of them and projected their effect on charge collection and spectral response. In addition, we fabricated detectors with these defective crystals and acquired fine details of charge-transport phenomena over the detectors’ volume using a high-spatial resolution (25 μm) X-ray response mapping technique. We related the results to better understand the defects and their influence on the charge-transport properties of the devices. The role of the defects was identified by correlating their signatures with the findings from our theoretical model and our experimental data.     

Determination of sphingosine kinase activity in biological samples by liquid chromatography–tandem mass spectrometry

Sphingosine kinase (SphK) is a key enzyme in modulating the levels of sphingosine 1‐phosphate (S1P) as well as an important enzyme in numerous biological responses. Using C17‐sphingosine as a substrate, we established a rapid, sensitive and highly efficient method for determination of SphK activity by analyzing the product C17‐sphingosine 1‐phosphate (C17‐S1P) using liquid chromatography–tandem mass spectrometry. The standard curve for C17‐S1P was linear over a wide range (10–1000 ng/mL) with correlation coefficient (r²) greater than 0.999. The lower limit of quantification for C17‐S1P was 10 ng/mL. The K_m values for C17‐sphingosine and ATP were determined to be 28.17 and 188.5 mM, respectively. More importantly, the SphK activity dramatically increased in cultured HEK 293 cells expressing wild‐type SphK1 as well as cells treated with tumor necrosis factor‐a, a sphingosine kinase activator. In contrast, the SphK activity decreased in cultured HEK 293 cells treated with dimethylsphngosine, a sphingosine kinase inhibitor. In conclusion, this method was sensitive and rapid in the determination of SphK acitivity, providing striking utilities in exploring the sphingosine kinase signaling pathway and screening active compounds targeting SphK activity. Copyright © 2010 John Wiley & Sons, Ltd.     

Rapid initiation of reactions in Al/Ni multilayers with nanoscale layering

Research into nanoenergetic materials is enabling new capabilities for controlling exothermic reaction rates and energy output, as well as new methods for integrating these materials with conventional electronics fabrication techniques. Many reactions produce primarily heat, and in some cases it is desirable to increase the rate of heat release beyond what is typically observed. Here we investigate the Al-Ni intermetallic reaction, which normally propagates across films or foils at rates lower than 10 m/s. However, models and experiments indicate that local heating rates can be very high (10⁷ K/s), and uniform heating of such a multilayer film can lead to a rapid, thermally explosive type of reaction. With the hopes of using a device to transduce electrical energy to kinetic energy of a flyer plate in the timescale of 100's of nanoseconds, we have incorporated a Ni/Al nanolayer film that locally heats upon application of a large electrical current. We observed flyer plate velocities in the 2-6 km/s range, corresponding to 4-36 kJ/g in terms of specific kinetic energy. Several samples containing Ni/Al films with different bilayer thicknesses were tested, and many produced additional kinetic energy in the 1.1-2.3 kJ/g range, as would be expected from the Ni-Al intermetallic reaction. These results provide evidence that nanoscale Ni/Al layers reacted in the timescale necessary to contribute to device output.     

Structural deformation monitored by vibrational properties and orbital modeling in (Pb,Sm)TiO3 systems

Pb_1−xSm_xTiO₃ (PST) powders with x varying from 0 to 0.1 were obtained by the polymeric precursor method, a soft chemical route. The vibrational properties relating tetragonal to pseudo-cubic phase transition were studied by Raman spectroscopy. The results obtained showed that the phase transition is extremely dependent upon the samarium content and presents a diffuse behavior. Monitoring of the oxygen 2p and titanium 3d orbitals was performed by the periodic mechanical quantum method, revealing the changes that occur with the distribution and contribution of the hybrid orbitals due to the samarium influence.     

Exact controllability and continuous dependence of fractional neutral integro-differential equations with state-dependent delay

In the present paper, with the help of the resolvent operator and some analytic methods, the exact controllability and continuous dependence are investigated for a fractional neutral integro-differential equations with state-dependent delay. As an application, we also give one example to demonstrate our results.     

Fabrication and transformation of dense SnO2 via laser ablation condensation

Dense SnO₂ nanocondensates with fluorite-type-related structures have been synthesized via severe heating-cooling under energetic Nd-YAG laser pulse irradiation of the Sn target in oxygen ambient. Transmission electron microscopic observations indicated that the fluorite type transformed in a martensitic manner into a baddeleyite-type structure with accompanied dislocations, twinning, commensurate shearing and shape change. The Pa3¯-modified fluorite-type structure was hardly observed possibly due to its transformation into α-PbO₂ type and then rutile-type structures in the dynamic process.     

Nitrogen containing barium titanate: Preparation and characterisation

The purpose of this work is to study the incorporation of nitrogen into barium titanate at oxygen sites by ammonolysis. The nitrogen content of the resulting barium titanate powders strongly depends on the flow rate of ammonia and the ratio Ba/Ti. The amount of resulting oxygen vacancies is lowered by co-doping with fluoride and tantalum.By avoiding an excess of BaO and exchanging 10 mol% Ti by Ta it is possible to produce powders with nitrogen content of more than 1 wt%. Partial substitution of barium oxide by barium fluoride also increases the nitrogen content. The nitrogen containing powders are colored and show an additional absorption at 500 nm measured in the UV/vis reflectance spectrum. The concentrations of nitrogen and fluorine in the samples were determined using ion-sensitive electrodes. X-ray powder diffraction shows the composition of the powders. The thermal stability was investigated by thermogravimetric analysis, and in order to calculate the specific surface area the three-point BET method was used.     

Pyrolysis synthesis of magnetic - and -MnO2 nanostructures and the polymorph discrimination

The concentration of the Mn(NO₃)₂ solution has significant influence on the morphologies and the phases of the MnO₂ products. A large number of ε- MnO₂ nanowires were prepared via a simple pyrolysis under lower reaction concentration. The nanowires have lengths up to tens of micrometers and diameters in the range of 20–100 nm. The β- MnO₂ nanobundles and nanoflowers were prepared by increasing the concentration of Mn(NO₃)₂ solution. The superparamagnetism of ε- MnO₂ nanowires and paramagnetism of β- MnO₂ nanoflowers indicate their potential applications in magnetic materials.