气色相谱-质谱法测定化妆品中的氯霉素

氯霉素是一种广谱抗生素,化妆品卫生规范规定氯霉素等抗生素为禁用物质.关于氯霉素的检测多采用高效液相色谱(HPLC)[1]和高效液相色谱-质谱(HPLC-MS)[2] 测定,或者经N,O-双三甲基硅烷基-三氟乙酰胺(BSTFA)、三甲基氯硅烷(TMCS)等硅烷化[3-4]后进行气相色谱(GC)、GC-MS测定.本文建立了采用较为普通的乙酸酐试剂进行衍生化,然后用GC-MS测定的方法.将该法应用于化妆品中氯霉素的检测,取得了较好的效果.     

[Cu(PTA)(Phen)2](p-MBA)(H6O)配合物的合成、晶体结构及电化学分析

The crystal structure of the title complex with the stoichiometric formula [Cu(PTA)(Phen)₂](p-MBA)(H₆O) (Phen=1,10-phenanthroline, PTA=terephthalic acid, p-MBA=p-toluic acid) has been determined by single-crystal X-ray diffraction. The crystal (C₄₈H₄₀CuN₄O₁₀, M_r=896.38) belongs to the monoclinic space group C2/c, with the following crystallographic parameters: a=1.778 6(3) nm, b=1.912 5(3) nm, c=1.389 9(2) nm, β=114.686(2)°, V=4.295 7(12) nm³, D_c=1.386 g·cm^-3, Z=4, μ(Mo Kα)=0.574 mm^-1, F(000)=1 860, final GooF=1.019, R=0.054 0, wR=0.148 3 for 2 644 observed reflections (I>2σ(I)). The crystal structure shows that the copper(Ⅱ) ion is coordinated with two oxygen atoms from one terephthalic acid molecule and four nitrogen atoms from two 1,10-phenanthroline molecules, forming a distorted octahedral coordination geometry. The cyclic voltametric behavior of the complex is also reported. CCDC: 298809.     

三种马来二腈基二硫烯镍(Ⅲ)离子对配合物的制备和结构表征

合成了3种离子对配合物 [1-benzyl-3-bromopyridium]⁺[Ni(mnt)₂]^- (1)，[1-(4′-flurobenzyl)-3-bromopyridiunm]⁺[Ni(mnt)₂]^- (2)，[1-(4′-cholorobenzyl)-3-bromopyridium]⁺[Ni(mnt)₂]^- (3)，(mnt=马来二腈基二硫烯，maleonitrile dithiolate)获得了单晶并解析了它们的单晶结构。     

一个新颖三维配位聚合物Pb(1，4-napdc)(DMF)的合成、结构及热稳定性研究

A novel 3D metal-organic coordination polymer Pb(1,4-napdc)(DMF) (1,4-napdc=naphthalene-1,4-dicarboxylate) was synthesized at room temperature using slow vapor diffusion method to grow single crystal that has been analyzed by X-ray diffraction. The crystal belongs to orthorhombic with space group P2₁2₁2₁. The unit cell parameters are as fellows: a=0.701 3(2) nm, b=1.407 6(3) nm, c=1.521 5(4) nm, V=1.501 8(6) nm³ and Z=4. In the crystal structure of Pb(1,4-napdc)(DMF), the square grids constructed with paddle-wheel units of Pb(Ⅱ) and 1,4-napdc links stack over each other to generate infinite 3D network, which has square apertures (1.158×1.158 nm²) along the crystallographic a-axis. The thermal stability of compound was investigated by differential scanning calorimetry and thermogravimetric analysis. CCDC: 293617.     

锰/钴-二氰胺-4-(1-咪唑基)苯胺三元配合物的合成与结构表征

以二氰胺钠[Na(dca)]和4-(1-咪唑基)苯胺(L)为共配体分别与锰盐和钴盐反应合成了2种新的配合物：零维[Mn(L)₂(dca)₂(H₂O)₂] (1)和二维[Co(L)₂(dca)](dca)_0.5(ClO₄)_0.5·1.5H₂O·MeOH (2)。通过元素分析、红外光谱和X射线单晶衍射对其进行了表征。配合物1属于三斜晶系，P1空间群。配合物2晶体属于正交晶系，Cmcm空间群。配合物1是1个中心对称的单核结构，锰(Ⅱ)离子与分别来自2个dca和2个L配体的4个氮原子以及2个水分子配位，形成八面体配位几何，L和dca均为单齿配位；配合物2是由混合桥dca和L组装成的二维配位聚合物网状结构，相邻的二维网以面对面方式堆积，沿c轴方向形成一维孔道，里面填充着未配位的反离子和溶剂分子。     

氢原子在Ti(0001)表面吸附的密度泛函理论研究

用密度泛函理论研究了氢原子的污染对于Ti(0001)表面结构的影响. 通过PAW总能计算研究了p(1×1)、p(1×2)、3^1/2×3^1/2R30[deg]和p(2×2)等几种氢原子覆盖度下的吸附结构, 以及在上述结构下Ti(0001)面fcc格点和hcp格点的氢原子吸附. 结果表明, 在p(1×1)-H、p(1×2)-H、3^1/2×3^1/2R30[deg]-H和p(2×2)-H几种H原子覆盖度下, 以p(1×1)-H结构的单个氢原子吸附能为最大. 在p(1×1)-H吸附结构下, 由于氢原子吸附导致的Ti(0001)表面Ti原子层收缩的理论计算数值分别为-2.85%(hcp吸附)和-4.31%(fcc吸附), 因此实际上最有可能的情况是两种吸附方式都有一定的几率. 而实验中观察到的所谓“清洁”Ti(0001)表面实际上是有少量氢原子污染的表面. 不同覆盖度和氢分压下, 氢原子吸附的污染对Ti(0001)表面结构有极大的影响, 其表面的各种特性都会随覆盖度的不同而产生相应的变化.     

偏氟乙烯/三氟氯乙烯交替共聚物在TATB表面吸附的分子动力学模拟

采用COMPASS力场和NVT正则系综的动力学模拟方法, 搭建了聚合度分别为10, 50和100的偏氟乙烯(VDF)/三氟氯乙烯(CTFE)交替共聚物, 对交替共聚物在1,3,5-三氨基-2,4,6-三硝基苯(TATB)的(0,0,1)晶面上的吸附和结构进行了分子动力学(MD)模拟. 结果表明, 在300～320 K温区, 聚合度为100的VDF/CTFE交替共聚物链对TATB晶体有理想的表面活性和吸附能力, 以train型构象平铺于TATB表面. 通过对聚合度为10的交替共聚物的多链体系在TATB表面吸附的MD模拟, 表明了VDF/CTFE交替共聚物具有非凝聚吸附的高表面活性特征. 对搭建的乙酸乙酯溶剂化的聚合度为50的VDF/CTFE交替共聚物在TATB晶体表面吸附的模拟, 实验证明了溶剂小分子能够降低共聚物链的吸附能力, 且链以tail型构象吸附于TATB表面.     

Synthesis and Crystal Structure of 1-（4-Bromobenzoyl）-3- [5-（E）-styryl-1,3,4-thiadiazol-2-yl]urea

1 INTRODUCTION 1,3,4-Thiadiazole derivatives represent an interes- ting class of compounds possessing broad spectrum biological activities[1~4]. Aroyl ureas are known to exhibit diverse biological effects, such as insecticidal, fungicidal, herbicidal and plant growth regulating activities[5~8]. Therefore, it is worthwhile to investi- gate the compounds incorporating both 1,3,4-thiadia- zole nucleus and aroyl urea group. In the previous paper[9], a series of aroyl ureas containing 1,3,4-t…     

Synthesis and Crystal Structure of 1-[4-(Pyrimidin-2-yl)piperazin-1-ylmethyl]-1H-benzotriazole

1 INTRODUCTION Based on the reported 1.65 ? high resolution crystal structure of spinach KARI (ketol-acid reduc- toisomerase) complex[1], we obtained 279 molecules with low binding energy toward KARI from MDL/ ACD 3D database searching, using program DOCK 4.0[2]. These potential structures provide further information for the design of new KARI inhibitors, one of novel derivatives of which as the title com- pound has been synthesized. Its crystal structure will provide us more inf…     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.