A One‐Pot Organometallic Route from a 4‐Alkenylpyridine to a 4,4‐Spiro‐Linked Ethyl 1,4‐Dihydropyridine‐1‐carboxylate

In a one‐pot process without isolation of intermediates, (but‐3‐en‐1‐yl)pyridine ( 13 ) is treated sequentially with dicyclohexylborane, trimethylaluminium, and ethyl carbonochloridate yielding ethyl 1,4‐dihydro‐4,4‐(tetramethylene)pyridine‐1‐carboxylate (=ethyl 8‐azaspiro[4.5]deca‐6,9‐diene‐8‐carboxylate; 2 ) in 46% yield based on starting alkenylpyridine 13 (Scheme 5).     

ERKALE—A flexible program package for X‐ray properties of atoms and molecules

ERKALE is a novel software program for computing X‐ray properties, such as ground‐state electron momentum densities, Compton profiles, and core and valence electron excitation spectra of atoms and molecules. The program operates at Hartree–Fock or density‐functional level of theory and supports Gaussian basis sets of arbitrary angular momentum and a wide variety of exchange‐correlation functionals. ERKALE includes modern convergence accelerators such as Broyden and ADIIS and it is suitable for general use, as calculations with thousands of basis functions can routinely be performed on desktop computers. Furthermore, ERKALE is written in an object oriented manner, making the code easy to understand and to extend to new properties while being ideal also for teaching purposes. © 2012 Wiley Periodicals, Inc.     

An experimental and theoretical approach to the molecular structure of 3‐{[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐ indol‐2‐one

The title molecule, 3‐{[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐indol‐2‐one (C₂₂H₂₀N₄O₁S₁), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, UV–visible, and single‐crystal X‐ray diffraction. The compound crystallizes in the monoclinic space group P21 with a = 8.3401(5), b = 5.6976(3), c = 20.8155(14) Å, and β = 95.144(5)°. Molecular geometry from X‐ray experiment and vibrational frequencies of the title compound in the ground state has been calculated using the Hartree–Fock with 6‐31G(d, p) and density functional method (B3LYP) with 6‐31G(d, p) and 6‐311G(d, p) basis sets, and compared with the experimental data. The calculated results show that optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies values show good agreement with experimental data. Density functional theory calculations of the title compound and thermodynamic properties were performed at B3LYP/6‐31G(d, p) level of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Two Supramolecular Nickel(II) Complexes: Syntheses,Crystal Structures and Solvent Effects

Two nickel(II) complexes, namely {[NiL(MeOH)(μ‐OAc)]₂Ni} · 2CH₂Cl₂ · 2MeOH ( 1 ) and {[NiL(EtOH)(μ‐OAc)]₂Ni} · 2EtOH ( 2 ) {H₂L = 5, 5′‐dimethoxy‐2, 2′‐[(ethylene)dioxybis(nitrilomethylidyne)]diphenol}, were synthesized and structurally characterized. Two trinuclear Ni^II complexes are both hexacoordinate around the central Ni^II atoms, showing octahedral coordination arrangements, and each complex comprises three divalent Ni^II atoms, two deprotonated L^2– ligands, in which four μ‐phenoxo oxygen atoms forming two [NiL(X)] (X = MeOH or EtOH) units, and coordinated and non‐coordinated solvent molecules. Complex 1 exhibits a 2D supramolecular network through intermolecular O–H ··· O, C–H ··· O and C–H ··· π interactions, whereas complex 2 forms an infinite 1D chain by intermolecular C–H ··· O hydrogen bonding interactions.     

Dissolution and Doping of Polyaniline Emeraldine Base in Imidazolium Ionic Liquids Investigated by Spectroscopic Techniques

Polyaniline is a model molecular system in the study of conductive polymers. Ionic liquids, on the other hand, are becoming more and more a very convenient alternative for conventional organic solvents. The dissolution of polyaniline‐emeraldine base (PANI‐EB) in imidazolium ILs leads to its doping, as indicated by optical and resonance Raman spectroscopies. In this study, it is proposed that the interaction of PANI‐EB and imidazolium ILs involves the specific interaction of the quinoid moiety of the former with the imidazolium ring of the latter, an interpretation that is also based on N K‐edge XANES measurements of neat PANI‐EB, neat ILs, and of their solutions.

     

亚微米级Cu0/Fe3O4复合物多相催化过一硫酸盐降解有机污染物

过一硫酸盐催化活化技术因其可产生强氧化性活性氧化物种,可快速氧化降解并矿化有机污染物的优异性能而备受关注.本文成功制备了亚微米级Cu0/Fe3O4复合物,发现其能多相催化过一硫酸盐产生单线态氧降解有机污染物.首先,以CuCl2·2H2O,FeCl2·4H2O和FeCl3·6H2O为铜源和铁源,水合肼为还原剂,采用水热法在180oC反应24 h制备了亚微米级磁性Cu0/Fe3O4复合物.表征结果显示,所制材料为Cu0和Fe3O4的复合物,颗粒大小约为220 nm;单一相Cu0和Fe3O4晶体粒径分别为33.8和106.2 nm,而Cu0/Fe3O4复合物中Cu0和Fe3O4晶体粒径分别减为20.8和31.9 nm.这表明Cu0和Fe3O4复合降低了Cu0和Fe3O4晶体粒径,有利于Cu0和Fe3O4的分散.BET测试结果表明,Cu0/Fe3O4复合物比表面积为4.6 m2/g,与Cu0颗粒的(4.2 m2/g)相当,但远小于Fe3O4的(15.6 m2/g).制备的Cu0/Fe3O4复合物可有效催化过一硫酸盐产生单线态氧降解罗丹明B、亚甲基蓝、金橙II、苯酚和对氯酚.当Cu0/Fe3O4复合物的用量为0.1 g/L,过一硫酸盐浓度为0.5 mmol/L和初始pH为7时,Cu0/Fe3O4复合物可在30 min内完全降解20μmol/L的罗丹明B、亚甲基蓝、金橙II以及0.1 mmol/L的苯酚和对氯酚.对比试验显示,在相同条件下,Cu0和Fe3O4颗粒分别可以降解28%和20%的罗丹明B.这表明Cu0/Fe3O4复合物中的Cu0和Fe3O4晶体在催化过一硫酸盐降解污染物的反应中具有协同作用,这主要来源于Cu0/Fe3O4复合物中Cu0和Fe3O4的晶体粒径变小和更好的分散.采用分光光度法测定了降解反应液中铜和铁离子的溶出量.当Cu0/Fe3O4复合物的用量为0.1 g/L,过一硫酸盐浓度为0.5 mmol/L和初始pH为7时,反应60 min后,降解液中铜和铁离子的浓度分别为0.22和0.1 mg/L,仅占复合物中总铜和总铁量的1.1%和0.2%,表明Cu0/Fe3O4复合物具有较强的化学稳定性.所制Cu0/Fe3O4复合物具有超顺磁性,借助磁场实现快速分离回收,可循环利用五次,表明其优越的催化稳定性.通过加入乙醇和叠氮化钠,考察了Cu0/Fe3O4复合物催化活化过一硫酸盐体系中的活性氧化物种.发现100 mmol/L乙醇的加入对污染物的降解无明显影响,而加入同等量的叠氮化钠可完全抑制污染物的降解,表明Cu0/Fe3O4复合物催化活化过一硫酸盐产生的主要活性氧物种为单线态氧.采用电子顺磁共振谱进一步证实了单线态氧的生成.基于以上研究,Cu0/Fe3O4复合物催化活化过一硫酸盐的机理为Cu0/Fe3O4作为一个电子媒介加速过一硫酸盐和污染物之间的电子转移,从而导致污染物被快速降解.该反应机理不同于常见的金属催化过一硫酸盐产生硫酸根和羟自由基的反应机理.我们推测,电导性优良的Cu0在此催化反应中起着关键性作用.本催化方法可作为一种绿色的氧化技术用于环境污染物的氧化降解处理.     

XPS与UPS测量几种材料功函数的比较

为比较X射线光电子能谱(XPS)与紫外光电子能谱(UPS)测量材料功函数结果间的差异,依次对经氩离子清洁表面吸附层的Au、Ag薄膜样品和单晶硅片,以及未进行表面清洁的Au、Ag、MoO_3薄膜样品,单晶硅片及ITO导电玻璃的功函数进行测量。给出了XPS和UPS测量功函数的计算方法,并探讨了影响材料功函数测量结果不确定性的因素。研究发现XPS及UPS在测量表面清洁的金属样品时,测量结果基本一致,具有较高的准确度,表面清洁的Au、Ag样品一经暴露空气后其表面覆盖一层吸附层,功函数很快发生变化。利用UPS或XPS测量金属和半导体的功函数时应避免暴露空气,若金属样品在空气中暴露时建议使用氩离子清洁表面。研究结果对科研人员按实际测试需求合理选择测量方法具有一定的指导意义。     

Halogen–Aromatic π Interactions Modulate Inhibitor Residence Times

Prolonged drug residence times may result in longer‐lasting drug efficacy, improved pharmacodynamic properties, and “kinetic selectivity” over off‐targets with high drug dissociation rates. However, few strategies have been elaborated to rationally modulate drug residence time and thereby to integrate this key property into the drug development process. Herein, we show that the interaction between a halogen moiety on an inhibitor and an aromatic residue in the target protein can significantly increase inhibitor residence time. By using the interaction of the serine/threonine kinase haspin with 5‐iodotubercidin (5‐iTU) derivatives as a model for an archetypal active‐state (type I) kinase–inhibitor binding mode, we demonstrate that inhibitor residence times markedly increase with the size and polarizability of the halogen atom. The halogen–aromatic π interactions in the haspin–inhibitor complexes were characterized by means of kinetic, thermodynamic, and structural measurements along with binding‐energy calculations.     

Noncovalent Interactions of π Systems with Sulfur: The Atomic Chameleon of Molecular Recognition

The relative strength of noncovalent interactions between a thioether sulfur atom and various π systems in designed top pan molecular balances was determined by NMR spectroscopy. Compared to its oxygen counterpart, the sulfur atom displays a remarkable ability to interact with almost equal facility over the entire range of π systems studied, with the simple alkene emerging as the most powerful partner. With the exception of the O???heteroarene interaction, all noncovalent interactions of sulfur with π systems are favoured over oxygen.     

Bi_(0.5)Na_(0.5)TiO_3的制备及光催化性能研究

以Bi(NO3)3·5H2O、Na OH、Ti(OC4H9)4为原料,采用水热法制备Bi0.5Na0.5Ti O3纳米光催化剂。用XRD、TEM表征了Bi0.5Na0.5Ti O3光催化剂的结构和形貌。以亚甲基蓝为模型污染物,考察了不同浓度的Na OH对Bi0.5Na0.5Ti O3晶体在紫外光和可见光照射下光催化活性的影响。通过荧光技术研究了Bi0.5Na0.5Ti O3光催化剂表面羟基自由基的生成,探究了清除剂对光催化降解污染物活性的影响。结果表明:Na OH的浓度对Bi0.5Na0.5Ti O3光催化剂的紫外光和可见光活性有很大的影响,当Na OH浓度为8mol·L-1时制备的Bi0.5Na0.5Ti O3晶体光催化活性最高,光照1h,亚甲基蓝的紫外及可见光催化降解率分别达到69.8%、53.4%,在光催化降解过程中·O2ˉ和·OH起主要作用,尤其是·O2-起了重要作用。