Electrocatalytic properties of Au(111)-Pd quasi-single-crystal film electrodes as probed by ATR-SEIRAS

Electrochemical and electrocatalytic properties of thin films Au(111-25 nm), which are quasi-single-crystal electrodes 25 nm thick made of gold with the (111) preferential orientation, and same electrodes modified with a monolayer (ML) of palladium are studied in 0.1 M solutions of HClO₄ and H₂SO₄ employing voltammetric techniques and surface enhanced infrared reflection absorption spectroscopy (ATR-SEIRAS). Spectroscopic experiments demonstrate strong adsorption of electrolyte species (H₂O, OH_ads, anions) on the Pd surface. The weak and reversible adsorption of CO on Au(111-25 nm) does not change the interfacial-water structure. Adsorption of CO on the Pd-modified film results in an irreversibly adsorbed CO adlayer stabilized by co-adsorbed isolated water species. Various electrooxidation mechanisms are discussed. Electrochemical and spectroscopic investigations on the adsorption and electrooxidation of HCOOH on bare and 1 ML Pd-Au(111-25 nm) electrodes reveal that electrooxidation proceeds in both cases via a direct or dehydrogenation pathway. This mechanism involves the formation of formate as intermediate, which is detected by in situ ATR-SEIRAS. The reactivity on Pd-modified surfaces is higher than on bare gold. The specifically adsorbed anions (sulfate/bisulfate) and the oxide formation on the substrate surface lower the reactivity for CO and HCOOH on both surfaces. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 11, pp. 1312–1329. Based on the report delivered at the 8th International Frumkin Symposium “Kinetics of the Electrode Processes,” October 18–22, 2005, Moscow. The text was submitted by the authors in English.     

The effect of UV-irradiation on composting of polyethylene modified by cellulose

LDPE and its blend with cellulose, obtained by extrusion, were UV-irradiated with different doses or biodegraded in soil up to 1 year. Simultaneously, the same samples were 1 year biodegraded after 20 h UV pre-irradiation in the same conditions. The course of photo- and biodegradation was monitored by estimation of average molecular weights and polydispersity, gel amount, changes of PE crystallinity and mechanical properties. Moreover, the biodegradation degree was calculated on the basis of carbon dioxide evolved and surface morphological changes were observed by SEM. It was found that biodegradation of PE + cellulose is hampered by intermolecular crosslinking of both components. Although, the rate of decomposition of PE + cellulose blends is low it is enough for disintegration of such materials in the natural environment.     

Ce0.6Zr0.35Y0.05O2和Pr0.6Zr0.35Y0.05O2催化剂表面上CO氧化和18O-16O交换反应的研究

测定了在Ce0.6Zr0.4O2,Ce0.6Zr0.35Y0.05O2,Pr0.6Zr0.4O2和Pr0.6Zr0.35Y0.05O2 (分别表示为CZ,CYZ,PZ和PYZ)样品表面上的CO氧化反应和18O-16O 同位素交换反应.结果表明: 在CZ和PZ系列固熔中掺杂Y3 离子可以改善晶格氧的迁移速度;PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.其原因是将Y3 掺杂到Ce0.6Zr0.4O2 或Pr0.6Zr0.4O2晶格中,增加了样品的氧空位浓度,从而提高了晶格氧的迁移性质,而PrOx比CeO2具有更低温度的氧化还原性质,因此PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.     

Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .     

An in situ STM study on the long-range surface restructuring of Au(1 1 1) in a non-chloroaluminumated ionic liquid

We report an in situ STM study of a potential-dependent long-range surface restructuring of Au(1 1 1) electrode in neat 1-butyl-3-methylimidazolium tetrafluoroborates (BMIBF₄) ionic liquid. Au(1 1 1) undergoes a significant long-range surface restructuring upon cathodic excursion to −1.0 V vs. Pt quasi-reference. The restructuring involves the formation of tiny pits, which then develops into a stable worm-like network with an average width of the network grids 2 nm. Electrochemical annealing occurs at the cathodic limit with the presence of a reduction product of cation BMI⁺. A smooth surface is recovered with the appearance of the typical (√3 × 22) reconstruction of Au(1 1 1). The surface restructuring is reestablished upon anodic excursion to −1.3 V after the adsorbed reduction product is oxidized. The long-range surface restructuring phenomenon is tentatively explained as a result of partial charge transfer to the weakly adsorbed BMI⁺, which reduces the metal–metal cohesive energy. In addition, the synergetic effect of the counter anion BF₄⁻ may also be involved. The results provide a knowledge of Au(1 1 1) electrode behavior in the neat ionic liquid and are beneficial to understanding in situ STM results involving surface morphological changes in such a media.     

Nitro derivatives of cyclic sulfoximides of the 1,2-benzoisothiazole series

Nitro derivatives of 1-R-1,2-benzoisothiazol-3-one 1-oxide were synthesized by the reactions of 2-alkyl(phenyl)thio-4-nitro- and 4,6-dinitro-2-(phenylthio)benzamides with chlorine in 60% acetic acid. Analogous reactions of 2-(n-butylthio)-4-nitro- and 2-(tert-butylthio)-4-nitrobenzamides with chlorine afforded 2-butyl- and 2-H-1,2-benzoisothiazol-3-one 1-oxides, respectively. The proposed reaction mechanism includes the formation and subsequent transformations of S-alkyl-S-aryl- and S,S-diarylchlorosulfonium chlorides.     

Ab initio through‐space/bond interaction analysis of the long C–C bonds in Bi(anthracene‐9,10‐dimethylene) photoisomers

The bi(anthracene‐9,10‐dimethylene) photoisomer has remarkably long C–C single bonds. To examine the lengthening of the C–C bond, we propose a novel procedure for quantitatively analyzing orbital interactions in a molecule at the level of the ab initio molecular orbital method. In this procedure, we can cut off the specific through‐space/bond interactions in a molecule by artificially increasing the absolute magnitude of the exponents in a Gaussian function. Then, the spatial orbital interactions were perfectly cut off, and, each term that makes up the total energy, that is, the nuclear–electron attractions, the electron–electron repulsions, and the nuclear–nuclear repulsions cancel each other. Several model molecules of the photoisomer were analyzed by this procedure. It was found that the orbital interaction between the p orbital on the benzene ring and the σ* orbital on the C–C bond in question, σ→σ* electron transfer through π orbital, weakens the C–C bond efficiently when these orbitals were located in the “periplanar” conformation. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

石墨炉原子吸收光谱无标样分析法的研究：Ⅰ.消除基体干扰

实现石墨炉原子吸收光谱绝对分析必须消除基体干扰，本研究采用有机基体改进剂，管壁原子化、热解涂层石墨管，峰面积积分吸收信号，Ｄ２灯或Ｚｅｅｍａｎ效应扣除背景，有效地控制和消除了海水基体对Ａｓ，Ｃｄ，Ｃｏ，Ｃｒ，Ｃｕ，Ｍｎ，Ｎｉ，Ｐｂ和Ｖ等元素的干扰，实现了无干扰测定。     

钯镁基体改进剂对铅,铋,锗在石墨炉中原子化影响的研究

通过原子吸收和X-射线衍射分析证明,加入钯镁基体改进剂在预热处理后对Pb、Bi和Ge三个元素分别生成金属间化合物PbPd_3、BiPd_3、Ge_9Pd_(23)和其他化合物,从而提高了最高允许灰化温度,改变了原子化机理。在原子化阶段这些金属间化合物直接分解为金属原子,结果提高测定灵敏度。     

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C.

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C., has been developed. The synthesis is based on cross-coupling of 8-iodooct-2E-en-I-ol THP ether with dec-5Z-enyl bromide catalyzed by CuBr. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1529–1531, August, 1997.