Y掺杂对氢氧化镍电极高温性能的影响

合成了内掺稀土元素Y的β-Ni(OH)2和α-Ni(OH)2材料, 并通过XRD、TEM、CV 和充放电测试等方法研究了Y元素对这两种晶型活性材料的结构、形貌以及高温电化学性能方面的影响, 发现Y元素可显著提高β-Ni(OH)2和α-Ni(OH)2材料的高温性能, 且作用机理相同, 均是通过提高析氧过电位来改善镍电极的高温充电效率. 但是α-Ni(OH)2在高温下的相稳定性仍有待提高.     

吖啶类衍生物的荧光性质

用比较法测得23种啶类衍生物的荧光量子效率（Φf)，以评估这些化合物的荧光性质，结果表明，N－烃基吖啶酮类化合物的荧光量子效率要比9－取代苯基吖啶类和9－取代苯亚甲基－10－甲基－9，10－二氢吖啶类化合物的荧光量子效率大，在非极性溶剂中，9－聚代苯亚甲基－9，10二氢吖啶分子内的强吸电子基NO2增强荧光量子效率，强推电子基OCH3降低荧光量子效率，这些测量结果与取代基的电子作用经验规律不相符，这种现象可以用分子内电荷转移理论进行解释。     

水/油型微乳液中球形及棒状钛酸锶钡纳米粒子的控制合成

Barium strontium titanate nanoparticles with spherical and rod-like morphologies were synthesized in water/Triton X-100/n-hexanol/cyclohexane quaternary reverse microemulsion solution. The influences of the molar ratio of water to surfactant (ω₀) and the concentration of reactants on the morphology and size of barium strontium titanate nanoparticles were studied. The structure, compositions and morphology of the prepared products were characterized by XRD, SAED, ICP, EDS and TEM. The results show that the obtained Ba_0.7Sr_0.3TiO₃ spherical nanoparticles with diameters of 20～100 nm and the Ba_0.7Sr_0.3TiO₃ nanorods with diameters of 70～120 nm and lengths up to 600～800 nm are a single crystal, with a cubic phase. The molar ratio for barium, strontium and titanate in products is about 0.7:0.3:1.     

眼镜蛇蛇油中甘油三酸酯的成分研究

用ＡｇＮＯ３－硅胶薄层板，氯仿＋丙酮（２０＋１）为展开剂，将蛇油中甘油三酸酯分离为５个组分，并用同样的色谱固定相和石油醚－氯仿－丙酮溶剂系统进行制备性分离。用质谱法对甘油三酸酯进行分子一级水平的化学研究，确定了眼镜蛇蛇油中５个主要的甘油三酸酯成分的结构形式为：１６∶０－１８∶０－１８∶０，１６∶０－１８∶０－１８∶１，１６∶０－１８∶２－１８∶１，１８∶２－１８∶２－１８∶０，１８∶２－１８∶２－１８∶１。     

SDS/n－C5H11OH/n－C7H16/H2O体系中W/O－BI微乳液界面电性质

In the system of SDS/n-C5H11OH/n-C7H16/H2O with the weight ratio of SDS/n-C5H11OH/H2O system at5.0/47.5/47.5, the upper phase of the system was W/O microemulsion, and the lower phase was the bicontinuous microemulsion. When the n-heptane content was less than 1%, with the increase of the n-heptane content, the capacitance (Co, Cod) in the upper phase (W/O) dropped, the capacitance (CB1, CBld) in the lower phase (BI) raised. At the same time, the W/O-BI inteffacial potential (ΔE), capacitance (Ci), and charge-transfer current (ict) decreased.After the n-heptane content reached 1%, with the increase of the n-heptane content, ΔE, Ci and ict demonstrated no significant change.     

Effect of Particle Size and Capping on Photoluminescence Quantum Efficiency of 1,3,5-Triphenyl-2-pyrazoline Nanocrystals

Organic nanocrystals of 1,3,5-triphenyl-2-pyrazoline(TPP) with a series of sizes were synthesized by reprecipitation method.The luminescence quantum efficiency of TPP nanocrystals increases from 24.2% for the nanocrystals with an average size of 300nm to 34.6% for those with an average size of 20nm.Surface capping by polyvinyl pyrrolidone(PVP) will improve the quantum efficiency of TPP nanocrystals.The size-dependence and capping-induced variation of the luminescence quantum efficiency was elucidated in viewpoint of aggregation quenching and the equilibrium between the TPP monomers and the aggregates in TPP nanocrystals.     

Cu-Ce/γ-Al2O3对硬脂酸催化水热脱氧产生烷烃的效果

利用等体积浸渍法制备Cu-Ce/γ-Al₂O₃催化剂，并在无H₂存在的条件下对硬脂酸进行催化水热液化。对催化剂进行BET比表面积分析和X射线衍射（XRD）分析可知，Cu-Ce/γ-Al₂O₃催化剂中存在CuO和CeO₂两种晶型，在300℃条件下水热反应12 h后具有更好的热稳定性。通过对硬脂酸进行水热液化实验和对生物油进行气相色谱-质谱（GC-MS）分析发现，加入Cu-Ce/γ-Al₂O₃催化剂能够获得最高的硬脂酸转化率（94.71%）和总烃产率（81.41%），水热液化脱氧效果最好。分析正烷烃的产率，结果发现硬脂酸在高温水热条件下主要发生脱羧反应。Cu-Ce/γ-Al₂O₃催化剂的加入能够同时促进反应过程中脱羧反应、加氢脱氧反应和裂化反应。此外，Cu-Ce/γ-Al₂O₃还能够促进羰基基团的脱除，有效减少产物中的醛和酮类物质。     

生物质热解油气化试验研究

生物质是一种环境友好可再生资源，可以通过多种途径转化为液体燃料。生物质热解液化即是在缺氧状态下对生物质进行快速加热，然后再对热解产物进行快速冷凝，最后获得一种称为生物油的液体燃料的技术。该技术以及生物油的特点主要有：热解液化温度为500℃，远低于生物质热解气化所     

程序涂渍柱“柱效能程序效应”的研究

本文从理论上给出程序柱“柱效能程序效应”的概念并导出了函数关系式,通过计算机可计算柱效能程序效应与柱内各变量之间的关系,实践证明实验数据的变化趋势与理论数据相符。     

有机锆交联剂的制备及其性能

随着油田深部调剖应用的不断推广，以及环保要求的提高，适用于深部调剖调驱体系的低污染有机锆交联剂逐渐受到关注。以ZrOCl₂·8H₂O、乳酸、乙二胺、硫脲为原料，制备了有机锆交联剂和HPAM-锆交联凝胶，其结构和性能经SEM和岩心驱替装置表征。并利用正交实验法优化了制备条件。结果表明：制备有机锆交联剂的最佳条件为：氧氯化锆、乳酸、乙二胺及硫脲的质量比为7.8/1/6.7/5，反应温度为70 ℃，反应时间为3 h。交联温度为60 ℃，HPAM浓度为2 g·L^-1、聚锆比为30/1时，聚合物凝胶成胶强度达到24968 mPa·s，成胶时间约8 h，凝胶体系可维持90 d不破胶。在级差为3.9的双管驱替岩心实验中，两管的岩心分流率均接近50%，剖面改善率达到66.77%。