基于正交试验法的显微镜上照明设计

根据LED光源特性和目标面光强的分布要求,采用正交试验法,对显微镜的LED照明系统进行优化设计。利用TracePro软件对所设计的系统进行光线追迹仿真,结果表明,在Φ50mm的范围内照度均匀性达到83.7%,能量利用率达到52.8%。该结构简单,成本低,易于实现。     

用于光纤熔接系统的纤芯检测镜头设计

光纤已广泛应用于当今社会的信息传输领域。为了满足长距离光纤传输中高质量光纤熔接的需要,介绍了一个应用于光纤熔接系统的透射光纤纤芯检测系统。该系统中的核心器件是一组能对光纤纤芯成像的特殊镜头。借助于ZEMAX软件,设计了这组检测镜头。该镜头具有8倍放大倍率、长工作距离、短结构、高精度等特点。论述了镜头的设计方案和设计过程,并给出了满足要求的设计结果。通过在LightTools软件中对整个系统检测结果的模拟,证明了该设计的可行性。     

基于NiosⅡ的OLED显示驱动技术研究

为了利用有机发光二极管(OLED)显示屏显示字符及图形,对基于Nios技术的OLED显示驱动进行了研究。利用FPGA开发环境编写SVGA时序的Verilog HDL程序,设计了适合EMA-100080型SVGA+主动矩阵OLED微型OLED显示屏的SVGA接口;利用Nios集成开发环境编写C语言程序/控制字符、图形的生成及传输,协调NiosⅡ和FPGA之间数据传输。经调试及验证,表明OLED屏能够显示特定的字符及图形。     

模拟高压静电对Q67发光影响的实验系统

用发光二级管和光学衰减片模拟Q67的发光光谱.实验中发现高压静电较低时发光微生物发光强度高于无静电作用时,但随高压静电的增加,发光强度逐渐减弱.实验结果表明该系统可以模拟高压静电对Q67发光的影响,使实验可在室外环境中进行,方便水环境的监测.     

土壤源热泵系统冷凝热回收的优化研究

文中提出了一种土壤源热泵冷凝热回收系统,能够减少冬夏两季土壤源热泵系统从土壤冷热源排放吸收热量不均对土壤温度场所造成的影响,并结合火用平衡方程建立了土壤源热泵系统冷凝热回收的优化模型。基于此模型,探讨了系统冷凝器和地下埋管的优化配置,通过模拟计算对该系统在制冷工况下改进前后的运行情况进行了分析对比,结果显示土壤源冷凝热回收系统应用于实际工程能够提高整个系统的COP以及火用效率。     

A three-step system calibration procedure with error compensation for 3D shape measurement

System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accurate calibration of such a measurement system. The system accuracy is improved with considering the nonlinear measurement error created by the difference between the system model and real measurement environment. We use Levenberg-Marquardt optimization algorithm to compensate the error and get a good result. The improved method has a 50% improvement of re-projection accuracy compared with our previous method. The measurement accuracy is maintained well within 1.5% of the overall measurement depth range.     

CMOS vision sensor with integrated into low fully digital image process power 1/8-inch chip

A digital still camera image processing system on a chip, different from the video camera system, is pre- sented for mobile phone to reduce the power consumption and size. A new color interpolation algorithm is proposed to enhance the image quality. The system can also process fixed patten noise （FPN） reduction, color correction, gamma correction, RGB/YUV space transfer, etc. The chip is controlled by sensor regis- ters by inter-integrated circuit （I2C） interface. The voltage for both the front-end analog and the pad cir- cuits is 2.8 V, and the volatge for the image signal processing is 1.8 V. The chip running under the external 13.5-MHz clock has a video data rate of 30 frames/s and the measured power dissipation is about 75 roW.     

基于激光照明的高速船用夜视系统设计

针对高速船常用夜视设备所存在的安全隐患,提出了一种基于激光照明的高速船用夜视系统的解决方案,通过研究近红外激光夜视技术,开发出具有夜间大角度照明、作用距离远、成像清晰的全天候高速船用夜视设备,多次海上测试效果良好,可为高速船夜间安全航行提供可靠保障。     

Microfluidic System for Synthesis of Trigonal Selenium Nanowires

<正>A microfluidic system was developed for the synthesis of trigonal selenium(t-Se) nanowires,which was composed of a glass microchip coupled with a poly(methyl methacrylate)(PMMA) microchip.In the glass microchip, amorphous selenium(a-Se) colloid was prepared by reducing selenious acid with an excess amount of hydrazine at a temperature of 100℃.In the coupled PMMA microchip,a-Se was transformed into more stable t-Se seeds via sonication at room temperature.The residence time of the reactants in both microchips was optimized by varying the dimension and length of the microchannel each.The t-Se nanowires were formed by anisotropic growth of selenium crystallite during sonication and aging under the assistance ofβ-cyclodextrin(β-CD).Various stages of the nanowires' growth were investigated.The as-synthesized products were characterized by powder X-Ray diffraction(XRD),Raman spectroscopy,scanning electron microscopy(SEM),transmission electron microscopy(TEM) and selected-area electron diffraction(SAED).