Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

亮氨酸与异亮氨酸在金/银核-壳复合纳米粒子上的吸附状态

The Raman spectra and Surface enhanced Raman spectra (SERS) of leucine and isoleucine adsorbed on core-shell Au/Ag nanoparticles were obtained and assigned, and the different Raman peaks resulting from different vibrational models of the isomers忆groups were analysed. In Raman spectra, the leucine’s (ω(CH3)) is at 962, 945, 924 cm-1, (δas(CH3)) at 1408, 1454 cm-1; corresponding values for isoleucine are, 922 cm-1 and 1448, 1420, 1394 cm-1, respectwely. The difference in the peak positions of corresponding groups between leucine and isoleucine is more apparent in the SERS at acidic and basic conditions. The relationship between leucine and isoleucine’s concentration and SERS was interpreted preliminarily and the adsorption model on the core-shell Au/Ag nanoparticle surface was speculated.     

Au和SiO2多壳结构的制备和表征

利用自组装技术和胶体还原化学, 制备出金纳米壳Au@SiO₂以及SiO₂包裹的金纳米壳SiO₂@Au@SiO₂; 去除SiO₂@Au@SiO₂颗粒中的金壳层, 获得含有可移动SiO₂核的空心壳H-SiO₂@M-SiO₂. 结果显示: SiO₂@Au@SiO₂复合颗粒表面光滑, 并保留了金壳的近红外吸收特性; 通过改变复合颗粒外层SiO₂厚度, 可以调节其等离激元共振峰的位置; 王水可以有效地去除SiO₂@Au@SiO₂中的金壳, 相应的等离激元共振峰消失.     

反胶束法合成氧化锌微晶及其荧光特性

0引言材料的结构(微结构)、尺寸和形貌等因素对其特性及其实际应用具有重要的影响。对无机材料特别是氧化物半导体进行结构控制的研究近年来引起了人们极大的关注。氧化锌作为一种宽带隙(3.2eV)半导体材料,可广泛应用于压电材料、气体传感器、橡胶添加剂和光学器件等领域,而且还因其在室温下可产生激射现象使其成为纳米光学材料研究领域中的一大热点[1￣6]。目前,除了传统的固相-气相(V S)反应外,用于氧化锌微晶的制备方法主要有共沉淀法[7]、多羟基化合物水解法[8]、有机金属气相沉积法[9￣12]和水热法[13]等。通过选择不同的制备方法和…     

Synthesis of Fullerene-Acrylamide Copolymer Nanoball and Its Lubrication Properties

A novel fuUerene-acrylamide copolymer was synthesized via radical polymerization. It is soluble in polar solvents such as water, dimethyl sulfoxide etc. The product was characterized by FTIR, UV-Vis and GPC. TEM analysis shows that the average particle diameter is about 46 nm. Four-ball tests show that the addition of a certain concentration of the fullerene copolymer to base stock (2 wt% triethanolamine and 0.5 wt% OPZ aqueous solution) can effectively raise the load-carrying capacity (PB value) and the antiwear ability. SEM analysis shows that the addition results in reducing diameter of wear scar and decreasing wear.     

磁性纳米包覆微球的制备和磁性表征

以胶体球形粒子为基体发展起来的纳米包覆(nano鄄coating)技术近来引起人们的极大兴趣,这种纳米包覆技术得到的产物常常被称为核壳粒子(core鄄shellparticles)。这种包覆一般是将纳米颗粒直接吸附在核微球上,或者包覆材料控制沉淀在核微球上[1,2]。这些复合微球常常展现出独特的光、电、力学、化学、催化等性质,因而具有广泛的研究和应用前景[3~7]。近十几年来,用做磁感应成像的超顺磁材料得到了深入的研究[4]。一方面,磁性颗粒的尺寸、电荷和表面成分对其应用有很大影响[8,9],另一方面,材料的磁学性质又主要取决于磁颗粒的大小[10]。Xu和Lindlar制备了含超顺磁颗粒的聚合物胶体颗粒,被用于构建超顺磁性的光子晶体[11,12]。在聚合物微粒上包覆氧化铁颗粒通常采用表面沉淀或表面改性官能团诱导反应包覆的方法。但这些方法不能很好控制复合微粒的均一性和表面平整性;Caruso的层鄄层包覆法(Layer鄄byLayer)虽然实现了磁性颗粒包覆[13],然而这种方法非常繁琐而不利于广泛应用。本文报道了一种新的合成磁性包覆颗粒的方法,即以聚合物微球为基核,通过非均相种子生长法包覆磁性纳米颗粒,并研究了...     

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

TiO2-双亲共聚物复合纳米粒子的合成与紫外光敏特性

用偶联剂乙烯基三乙氧基硅烷改性纳米粒子TiO₂, 应用超声技术将TiO₂ 纳米粒子分散在甲醇介质中, 然后用苯乙烯(ST)原位聚合包封, 再用丙烯酰胺或乙烯基吡咯烷酮(VP)共聚, 两步原位分散聚合得到了有机聚合物为壳、TiO₂为核的有机/无机复合粒子. 用红外光谱、紫外-可见光谱、透射电子显微镜等检测手段进行表征. 结果显示: 由于双亲共聚物对TiO₂纳米粒子的敏化作用, 紫外-可见光谱图上两种纳米复合粒子的最大吸收峰均有明显红移, 并且吸收光谱的范围扩大了, 其中尤以TiO₂/(PST-co-PVP)为甚. 意味着光敏化活性的提高, 特别是在可见光谱的范围内. 这种情形对宽带隙半导体材料如TiO₂纳米粒子的光催化特性是有利的, 表明这类材料的应用空间得到了拓展.     

无皂乳液聚合法制备聚甲基丙烯酸甲酯包覆厚度可控的纳米核-壳二氧化硅微球

用改进的Stöber法和无皂乳液聚合法制备窄分布的二氧化硅/PMMA核-壳纳米微球. 用改进的Stöber法将3-乙氧基甲基丙烯酸丙基硅烷(MPS)修饰在纳米的二氧化硅表面后, 用无皂乳液聚合法制备核-壳纳米微球. 该法简单有效且得到厚度均匀的聚合物包覆层. 随着单体MMA用量的增加, 用动态光散射法测量, PMMA壳层的厚度从6.4 nm增加到96.3 nm. 热重分析表明, PMMA的含量从22.25%增加到93.41%. 扫描电子显微镜和透射电子显微镜结果表明, 得到的是包覆良好、表面光滑的核-壳无机/聚合物纳米微球.     

壳层厚度对骨架Fe@HZSM-5核壳催化剂费托合成催化性能的影响

在不同的水热合成时间下,以铁铝合金为铁源和铝源,四丙基氢氧化铵为分子筛的模板剂和抽提合金中的铝的碱,一步制得了以骨架铁为核、不同厚度的HZSM-5分子筛为壳的Raney Fe@HZSM-5催化剂.采用元素分析、氮物理吸附、X射线粉末衍射、氨脱附、扫描电子显微镜等手段,考察了水热时间对催化剂基本物化性质的影响.随着水热时...