IN SITU OBSERVATION OF MELTING AND CRYSTALLIZATION BEHAVIORS OF POLY(ε-CAPROLACTONE) ULTRA-THIN FILMS BY AFM TECHNIQUE

The melting and crystallization behaviors of poly(ε-caprolactone) (PCL) ultra-thin films with thickness from 15 nm to 8 nm were studied by AFM technique equipped with a hot-stage in real-time. It was found that melting can erase the spherulitic structure for polymer film with high thickness. However, annealing above the melting point can not completely erase the tree-like structure for the thinner polymer film. Generally, the structure formation of thin polymer films of PCL is controlled not only by melting and crystallization but also by dewetting during thermal annealing procedures, and dewetting predominates in the structure formation of ultra-thin films. However, the presence of tree-like morphology at 75 °C may be due to the strong interaction between PCL and mica surface, which may stick the PCL chains onto the mica surface during thermal annealing process. Moreover, the growth of the dendrites was investigated and it was found that crystallization is followed from a dewetted sample, and the branches did not grow with the stems. The crystallization of polymer in the ultra-thin films is a diffusion-controlled process. Both melting and crystallization behaviors of PCL in thin films are influenced by film thickness.     

Halonickel 2,4-di-t-butyl-6-(quinolin-8-yliminomethyl)phenolates: Synthesis, characterization and ethylene reactivity

A series of nickel halides bearing 2,4-di-t-butyl-6-(quinolin-8-yliminomethyl) phenolate ligands was synthesized and characterized by IR spectroscopy and elemental analysis.Molecular structures of C1(R = H,X = Br) and C2(R = H,X = Cl) were further confirmed by single-crystal X-ray crystallographic studies,and revealed a distorted square planar geometry at nickel.Upon activation with diethylaluminum chloride(Et 2 AlCl),all nickel pre-catalysts displayed good catalytic activity [up to 9.3 × 10 5 g mol 1(Ni) h 1 ] for ethylene oligomerization with major dimerization.In the presence of methylaluminoxane(MAO),the nickel complex C1 was capable of ethylene polymerization under 3 MPa,and produced polyethylene products with narrow polydispersity(1.16 1.73) and molecular weights in the range of 2.6 4.95 kg/mol.     

Capability of DNA-fueled molecular machine in tuning association rate of DNA-functionalized gold nanoparticles

The capability of our newly developed DNA-machine-driven strategy in tuning the association rate of DNA-AuNPs was compared with that of linker-addition strategy which has potential practical applications in different fields. The new established strategy shows its superiority to the linker-addition strategy in tuning the association rate of DNA-AuNPs in both pre-incubation treatment and non-incubation treatment conditions since its two components (a complex and a catalyst-oligonucleotide) can be individually optimized to make the machine run at an optimal rate. This strategy will provide a more convenient and flexible option in designing an oligonucleotide detection system and building a complex and versatile device.     

An electrochemically prepared sky-blue light emitting ether functionalized polyfluorene as chemosensor for metal ions

Synthesis and electrochemical polymerization of 9,9-bis(2-(2-(2-methoxy ethoxy)ethoxy)ethyl)-fluorene(EO-F)into poly[9,9-bis(2-(2-(2-methoxy ethoxy)ethoxy)ethyl)-fluorene](EO-PF) films are reported. The boron trifluoride diethyl etherate electrolyte enables facile preparation of EO-PF films at lower potential compared to LiClO4/MeCN and the electrochemical polymerizations are discussed. The EO-PF shows good electrochemical behavior and can be dissolved in solvents such as DMSO and THF. The solubility of EO-PF in THF is 2 mg mL 1and the number average molecular weight is35300 with a polydispersity index of 1.65. The side chains on C9position of the monomer maintain unchanged after electrooxidation into corresponding polymer. The EO-PF dissolved in THF under 365 nm ultraviolet light is sky blue light emitting with the Commission Internationale de L Eclairage-CIE coordinates of(0.19, 0.15). The electropolymerized EO-PF is used for the first time in chemosensing metal ions, demonstrating fluorescence quenching for Mn2+and Fe3+while fluorescence enhancement for Cr6+ions.     

Synthesis, properties and electropolymerization of starshaped oligothiophenes with hexakis(fluoren-2-yl)benzene as core

Star-shaped oligothiophenes with hexakis(fluoren-2-yl)benzene (HFB) as cores were designed and synthesized. Grafting thiophene units to HFB results in a bond flattening of the core, and makes the molecules a flipping-twist shape. Their thermal, photophysical and electrochemical properties were studied. Highly cross-linked conjugated polymers can be produced by electropolymerization of T1-T3.     

Influence of clay on the morphology and phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends

The effect of clay on the morphology and phase-separation behavior of poly(methyl methacrylate)/poly(styreneco-acrylonitrile)(PMMA/SAN) blends and the variation of clay dispersion have been investigated. With the evolution of phase separation in PMMA/SAN, most of the clays are first located at the boundaries between PMMA and SAN, and then gradually move to the PMMA-rich domain, owing to the affinity of clay to PMMA. The introduction of clay causes the increase of binodal and spinodal temperatures of PMMA/SAN and enlarges their metastable region, indicating the phase stabilizing effect of clay on the matrix. But the influence of clay on the cloud points obviously depends on the composition of PMMA/SAN. The selective adsorption of PMMA on the clay results in the difference between the composition of surface layer and that of polymer matrix. Hence, the clay plays the role of an agent changing the conditions of phase structure formation.     

Crystal orientation and melting behavior of poly(ɛ-Caprolactone) under one-dimensionally “hard” confined microenvironment

Crystal orientation and melting behavior of poly(ε-caprolactone) in a diblock copolymer of poly(ε-caprolactone)-block-poly(2,5-bis[4-methoxyphenyl]oxycarbonyl)styrene) (PCL-b-PMPCS) was investigated. The degrees of polymerization of the PCL and PMPCS block are 200 and 98, respectively. With the PMPCS in a columnar liquid crystalline phase, the diblock is rod-coil one, which exhibits a lamellar phase morphology with the PCL layer thickness of 15.2 nm. Since the glass transition temperature of PMPCS block is much higher than the melting temperature of PCL, the crystallization of PCL is in a one-dimensionally "hard" confinement environment. Mainly on the basis of two-dimensional wide-angle X-ray diffraction experiments, we identified the orientation of PCL isothermally crystallized at various crystallization temperatures (Tcs). At high Tcs (Tc≥10℃), the c-axis of the PCL crystal is along the layer normal of the microphase-separated sturcture. Decreasing Tc can result in the tilting of PCL c-axis with respect to the layer normal. The lower the Tc is, the more the c-axis inclines. Meanwhile, the b-axis of PCL remains perpendicular to the layer normal. At a very low Tc of -78℃, the orientation of the PCL crystals is completely random. For the samples isothermally crystallized at Tc≤10℃, double melting behavior can be observed. While the low temperature endotherm reflects the melting of the crystals originally formed at the Tc applied, the high temperature one is associated with the crystals subjected to the process of recrystallization/reorganization upon heating due to the annealing effect.     

Preparation of single-hole hollow polymer nanospheres by raspberry-like template method

Single-hole hollow polymer nanospheres were fabricated by raspberry-like template method using "graft-from" strategy through atom transfer radical polymerization (ATRP). Nanometer-sized silica spheres were covalently attached onto the surfaces of micrometer-sized silica spheres. Crosslinked polymer shells on the nano-sized spheres outside the attached area were formed by "graft-from" strategy through ATRP. After removal of the silica cores, single-hole hollow crosslinked polymer nanospheres were obtained. In this strategy, most of ATRP monomers may be used and thus many functional groups can be easily incorporated into the single-hole hollow crosslinked polymer nanospheres.     

运载火箭试验数据管理及可视化系统设计

针对现有运载火箭试验数据管理及可视化系统依赖于第三方功能插件,未实现纯浏览器端三维模型渲染及交互,系统对运行环境依赖性强、部署和维护成本高等问题,设计了基于JavaScript框架ExtJS和WebGL框架three.js的运载火箭试验数据管理及可视化系统。首先基于B/S架构设计了系统总体框架,然后针对二维图形数据传输延迟问题设计了基于Web Worker的数据读取方案,最后针对浏览器端三维模型渲染需求提出了基于VTK模型的转换算法,设计了三维模型渲染及交互方案。试验结果显示,本系统不依赖于运行环境和功能插件,能实现浏览器端二维图形和三维模型渲染及流畅交互,为兼容国产化操作系统、降低部署和维护成本创造了条件。     

螺桨烷型分子BX[(CH_2)_n]_3和BX(CH_2)[CH(CH_2)_nCH](X=N,P)的结构和性质

采用密度泛函理论(DFT)研究了螺桨烷型分子BX[(CH2)n]3和BX(CH2)[CH(CH2)n CH](X=N,P;n=1-6)的结构、稳定性、化学键和电子光谱性质.计算结果表明这些分子都是稳定的.BX[(CH2)n]3(X=N,P;n=1-6)的最高占据分子轨道(HOMO)和最低空分子轨道(LUMO)之间的能隙均大于5.20 eV,其中BN[CH2]3和BP[CH2]3的能隙超过7.0 eV,与C5H6的能隙(7.27 eV)很接近,BX(CH2)[CH(CH2)n CH](X=N,P;n=1-6)的能隙在6.80 eV左右.所研究分子能量的二阶差分表明BN[(CH2)3]3、BP[(CH2)4]3及BX(CH2)[CH(CH2)2CH](X=N,P)是最稳定的.BX[(CH2)n]3的Wiberg键级表明除了BN[(CH2)n]3(n=2和6)中不存在B―N键,其它化合物中B和N均形成了化学键,BP[(CH2)n]3中除了BP[(CH2)2]3不存在B―P键,其它的均存在.电子密度的拓扑分析表明N―B键属于离子键,而P―B键具有共价键特征.BX[(CH2)n]3(X=N,P)的第一垂直激发能分别在191.1-284.8 nm和191.8-270.1 nm之间,BX(CH2)[CH(CH2)n CH](X=N,P)的第一垂直激发能分别在190.5-199.7 nm和209.0-221.3 nm之间.